3D FE modeling of oblique shot peening using a new periodic cell
Source abstract
Abstract
Oblique incidence is often observed in the peening process due to the geometric complexity of some of the treated targets. Obliquity of the jet stream also exists as a result of the way the shots are propelled. It is therefore the purpose of this study to conduct a realistic 3D finite element (FE) analysis of the peening process involving a large number of shots impinging simultaneously at a rate sensitive target made from Ti-6Al-4V. A novel periodic cell model is developed and used to examine the effect of oblique incidence upon the induced plastic strains and residual stresses. Some aspects of the simulation are first validated against published work in literature. The periodicity of the model is also examined and verified. A parametric study is further conducted to investigate the effect of various parameters involved in peening process using the newly proposed model. Several conclusions are drawn concerning the effect of incident angle, shot diameter and friction coefficient upon the generated residual stress and plastic strain fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. ABAQUS: Analysis User’s Manual, Version 6.11. Dassault Systèmes Simulia Corp, Providence (2011)
2. Almen, J.O., Black, P.H.: Residual Stresses and Fatigue in Metals. McGraw-Hill, Toronto (1963)
3. Al-Hassani, S.T.S.: Mechanical aspects of residual stress development in shot peening. In: Niku-Lari A. (ed.) Proceedings of the First International Conference on Shot Peening, pp. 583–602. Pergamon Press, Paris (1981)
4. Edberg, J., Lindgren, L., Mori, K.: Shot peening simulated by two different finite element formulations. In: Shen, S.F., Dawson, P. (eds.) Simulation of Materials Processing: Theory, Methods and Applications, pp. 425–430. Balkema, Rotterdam (1995)
5. Foss, B.J., Gray, S., Hardy, M.C., Stekovic, S., McPhail, D.S., Shollock, B.A.: Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000. Acta Mater. 61(7), 2548–2559 (2013)10.1016/j.actamat.2013.01.031 ↗
6. Frija, M., Hassine, T., Fathallah, R., Bouraoui, C., Dogui, A.: Finite element modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Mater. Sci. Eng. A 426, 173–180 (2006)10.1016/j.msea.2006.03.097 ↗
7. Guagliano, M.: Relating Almen intensity to residual stresses induced by shot peening: a numerical approach. J. Mater. Process. Technol. 110, 277–286 (2001)10.1016/S0924-0136(00)00893-1 ↗
8. Hong, T., Ooi, J.Y., Shaw, B.A.: A numerical study of the residual stress pattern from single shot impacting on a metallic component. Adv. Eng. Softw. 39, 743–756 (2008a)10.1016/j.advengsoft.2007.10.002 ↗
9. Hong, T., Ooi, J.Y., Shaw, B.: A numerical simulation to relate the shot peening parameters to the induced residual stresses. Eng. Fail. Anal. 15, 1097–1110 (2008b)10.1016/j.engfailanal.2007.11.017 ↗
10. Johnson, W.: Impact strength of materials. Arnold, London (1972)
11. Kim, T., Lee, H., Hyun, H., Jung, S.: Effects of Rayleigh damping, friction and rate-dependency on 3D residual stress simulation of angled shot peening. Mater. Design 46, 26–37 (2013)10.1016/j.matdes.2012.09.030 ↗
12. Klemenz, M., Schulze, V., Rohr, I., Lohe, D.: Application of the FEM for the prediction of the surface layer characteristics after shot peening. J. Mater. Process Tech. 209, 4093–4102 (2009)10.1016/j.jmatprotec.2008.10.001 ↗
13. Kobayashi, M., Matsui, T., Murakami, Y.: Mechanism of creation of compressive residual stress by shot peening. Int. J. Fatigue 20, 351–357 (1998)10.1016/S0142-1123(98)00002-4 ↗
14. Kudryavtsev, Y.F.: Residual stress. In: Sharpe, W.N. (ed.) Springer Handbook of Experimental Solid Mechanics, pp. 371–388. Springer, Berlin (2008)10.1007/978-0-387-30877-7_15 ↗
15. Li, A.K., Yao, M., Wang, D., Wang, R.: Mechanical approach to the residual stress field induced by shot-peening. Mater. Sci. Eng. A 147, 167–173 (1991)10.1016/0921-5093(91)90843-C ↗
16. Majzoobi, G.H., Azizi, R., Alavi Nia, A.: A three-dimensional simulation of shot peening process using multiple shot impacts. J. Mater. Process Tech. 164–165, 1226–1234 (2005)10.1016/j.jmatprotec.2005.02.139 ↗
17. Meguid, S.A.: Impact Surface Treatment. Elsevier, Amsterdam (1986)
18. Meguid, S.A., Klair, M.S.: An examination of the relevance of co-indentation studies to incomplete coverage in shotpeening using the finite-element method. J. Mech. Working Technol. 11, 87–104 (1985a)10.1016/0378-3804(85)90114-7 ↗
19. Meguid, S.A., Klair, M.S.: Elasto-plastic co-indentation analysis of a bounded solid using finite element method. Int. J. Mech. 27, 157–168 (1985b)10.1016/0020-7403(85)90056-6 ↗
20. Meguid, S.A., Shagal, G., Stranart, J.C., Daly, J.: Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses. Finite Elements Anal. Des. 31, 179–191 (1999a)10.1016/S0168-874X(98)00057-2 ↗
21. Meguid, S.A., Shagal, G., Stranart, J.C.: Finite element modelling of shot-peening residual stresses. Mater. Proces. Tech. 92–93, 401–404 (1999b)10.1016/S0924-0136(99)00153-3 ↗
22. Meguid, S.A., Shagal, G., Stranart, J.C.: 3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model. Int. J. Impact Eng 27, 119–134 (2002)10.1016/S0734-743X(01)00043-4 ↗
23. Meguid, S.A., Shagal, G., Stranart, J.C.: Development and validation of novel FE models for 3D analysis of peening of strain-rate sensitive materials. J. Eng. Mater. Tech. 129, 271–283 (2007)10.1115/1.2712469 ↗
24. Mylonas, G.I., Labeas, G.: Numerical modelling of shot peening process and corresponding products: residual stress, surface roughness and cold work prediction. Surf. Coat. Tech. 205, 4480–4494 (2011)10.1016/j.surfcoat.2011.03.080 ↗
25. Noyan, I.C., Cohen, J.B.: An X-ray diffraction study of the residual stress-strain distributions in shot-peened two-phase brass. Mater. Sci. Eng. 75, 179–193 (1985)10.1016/0025-5416(85)90188-0 ↗
26. Premack, T., Douglas, A.S.: Three-dimensional analysis of the impact fracture of 4340 steel. Int. J. Solid Struct. 32, 2793–2812 (1995)10.1016/0020-7683(94)00295-8 ↗
27. Prevey, P.S.: X-ray diffraction characterization of residual stresses produced by shot peening. In: Eckersley, J.S., Champaigne, J. (eds.) Shot Peening—Theory and Applications, pp. 81–93. IITT-International, Gournay-sur-Marne (1991)
28. Rahimzadeh, T.: Finite element modelling of residual stresses due to shot peening. M.S. Thesis, McGill University, Montreal (2009)
29. Schiffner, K., Helling, C.D.: Simulation of residual stresses by shot peening. Comput. Struct. 72, 329–340 (1999)10.1016/S0045-7949(99)00012-7 ↗
30. Schulze, V.: Modern Mechanical Surface Treatment. Wiley, Weinheim (2006)
31. Schwarzer, J., Schulze, V., Vöhringer, O.: Finite element simulation of shot peening—a method to evaluate the influence of peening parameters on surface characteristics. In: Wagner, L. (ed.) Shot Peening, ICSP-8, pp. 507–515. Garmisch-Partenkirchen, Germany (2006)
32. Sheng, X.F., Xia, Q.X., Cheng, X.Q., Lin, L.S.: Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy. Trans. Nonferrous Met. Soc. China 22, s261–s267 (2012)10.1016/S1003-6326(12)61717-8 ↗
33. Wu, X.Q., Wang, X., Wei, Y.P., Song, H.W., Huang, C.G.: Parametric study on single shot peening by dimensional analysis method incorporated with finite element method. Acta. Mech. Sin. 28, 825–837 (2012)10.1007/s10409-012-0072-0 ↗