journal article·2020-11-27Open access

Precision Analysis and Design of Rotating Coil Magnetic Measurements System

Soontorn Odngam, Chaiyut Preecha, Prapaiwan Sanwong, Woramet Thongtan, Jiraphon Srisertpol

Applied Sciences· Volume 10· Issue 23

Abstract

This research presents the design and construction of measuring instruments for a dipole magnetic field using a rotating coil technique. This technique is a closed-loop speed-control system where a Proportional-Integral (PI) controller works together with the intensity measurement of the magnetic field through the rotating coil. It was used to analyze the impact on the accuracy of the electromagnetic at speed ranges of 60, 90, and 120 rpm. The error estimation in the measurement of the normal dipole and skew dipole magnet caused by the steady-state error of the speed control system and the rotational search coil in whirling motion are demonstrated. Rotating unbalance, shaft coupling, and misalignment from its setup disturbed the performance of the speed control system as a nonlinear system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Magnetic Field Sensors Techniques · Electric Motor Design and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand

Synchrotron Light Research Institute (Public Organization), Nakhon Ratchasima 30000, Thailand

Funding

Synchrotron Light Research Institute

References (26)

Show source-provided references
1. Research and Development of the AC Magnets for CSNS/RCS10.1109/TASC.2011.2174543 ↗
2. Sunwong, P., Boonwanna, S., Chaichuay, P., Klysubun, P., Kwankasem, A., and Preecha, C. (May, January 29). Design and fabrication of a combined function magnet prototype for Siam photon source. Proceedings of the 9th international particle accelerator conference (IPAC2018), Vancouver, BC, Canada.
3. Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet10.1109/TASC.2018.2801325 ↗
4. Li, L., Li, Y.J., Ni, G.L., Chen, W., and Sun, X.J. (2005, January 16–20). Rotating coil magnetic measurement system and measurement results of quadrupole prototype for BEPCII storage ring. Proceedings of the 2005 Particle Accelerator Conference (PAC), Knoxville, TN, USA.
5. Harmonic coil design, Fabrication and commissioning for European XFEL linear accelerator superconducting magnets field measurement10.1109/TASC.2010.2041754 ↗
6. Development of a rotating-coil scanner for superconducting accelerator magnets10.5194/jsss-9-99-2020 ↗
7. Arpaia, P., Bottura, L., Cimmino, P., Giloteaux, D., Masi, A., Perez, J.G., Spiezia, G., and Walckiers, L. (2006, January 24–27). A fast-digital integrator for magnetic field measurements at Cern. Proceedings of the 2006 IEEE Instrumentation and Measurement Technology Conference, Sorrento, Italy.10.1109/IMTC.2006.328175 ↗
8. Magnetic Field Measurement of the Quadrupole and sextupole magnets for HLS-II storage ring
9. Application of PCB and FDM technologies to magnetic measurement probe system development10.1109/TASC.2012.2236596 ↗
10. Gunter, E. (2009, January 23–27). Understanding amplitude and phase in rotating machinery. Proceedings of the Vibration Institute 33 Annual Meeting, Harrisburg, PA, USA.
11. Vibration characteristics of unbalance response for motorized spindle system10.1016/j.proeng.2017.01.148 ↗
12. A smart experimental setup for vibration measurement and imbalance fault detection in rotating machinery
13. Experimental investigation of misalignment effects on rotor shaft vibration and on stator current signature10.1007/s11668-014-9785-7 ↗
14. Vibration analysis of misaligned shaft-ball bearing system10.17485/ijst/2009/v2i9.11 ↗
15. Speed control of dc motor using PID smart controller
16. Comparative analysis of speed control of dc motor using AI technique
17. Othman, K.A., Kamal, M.M., Mamat, N., and Yati, N. (2009, January 14–16). System identification of discrete model for DC motor positioning. Proceedings of the 8th WSEAS International Conference on Circuits, systems, electronics, control & signal processing (CSECS), Puerto De La Cruz, Canary Islands, Spain.
18. Tang, W.J., Liu, Z.T., and Wnag, Q. (2017, January 26–28). DC motor speed control based on system identification and PID auto tuning. Proceedings of the 36th Chinese Control Conference (CCC), Dalian, China.10.23919/ChiCC.2017.8028376 ↗
19. In situ calibration of rotating sensor coils for magnet testing10.1063/1.3675578 ↗
20. Rotating-coil calibration in a reference quadrupole, considering roll-angle misalignment and higher-order harmonics10.1016/j.measurement.2016.02.061 ↗
21. Performance of a fast-digital integrator in on-file magnetic measurements for particle accelerators10.1063/1.3673000 ↗
22. A polyvalent harmonic coil testing method for small-aperture magnets10.1063/1.4746281 ↗
23. Rotor Fault Diagnosis and Simulation Based on LabVIEW
24. Orbit analysis for imbalance fault detection in rotating machinery
25. The use of orbitals and full spectra to identify misalignment
26. (2020, November 12). Professional Plastics. Available online: https://professionalplastics.com/G-10FR4ROD.