journal article·2022-04-16Open access

Identification of Friction Behavior Variation in the Minor Flank of Square Shoulder Milling Cutters under Vibration

Bin Jiang, Weiheng Li, Peiyi Zhao, Lili Fan, Meng Sun

Applied Sciences· Volume 12· Issue 8

Abstract

In the milling process, the friction and wear of the tooth minor flank of the square shoulder milling cutter directly affects the machined surface quality and the cutter’s life. The friction of the minor flank of the cutter tooth presents a nonlinear distribution, and its variation cannot be revealed by using a single parameter. It is difficult to identify the dynamic characteristics of the friction of the minor flank of the cutter tooth. In this work, the friction velocity model for the cutter tooth minor flank was developed by using the relative motion relationship between the flank area element and the workpiece transition surface. In accordance with the atomic excitation theory developed under the potential energy field at the friction interface of the cutter, the model for friction energy consumption under the friction velocity and thermal-stress coupling field on the minor flank of the cutter tooth was developed. Based on the mechanism of the interfacial atomic thermal vibration, the model for the friction coefficient under thermal-stress mechanical coupling was developed. Using the instantaneous friction coefficient and normal stress, the instantaneous friction distribution function of the flank was obtained. Finally, an identification method for the friction dynamic characteristics of the shoulder milling cutter tooth flank under vibration was proposed and verified by experiments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China

Funding

Nature Science Foundation of Heilongjiang Province of China · National Natural Science Foundation of China

References (20)

Show source-provided references
1. Analytical prediction of shear angle and frictional behavior in vibration-assisted cutting10.1016/j.jmapro.2020.12.026 ↗
2. Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares method10.1007/s00170-020-05858-x ↗
3. Upgraded stability analysis of milling operations by means of advanced modeling of tooling system bending10.1016/j.ijmachtools.2016.11.005 ↗
4. Frictional and wear performance of TiAlN/TiN coated tool against high-strength steel10.1016/j.ceramint.2018.01.113 ↗
5. Analysis of adhered contacts and boundary conditions of the secondary shear zone10.1016/j.wear.2015.01.016 ↗
6. Surface Texture Generation using High-Feed Milling with Spindle Speed Modulation
7. Effects of cutting speed and tool wear on serrated chip formation
8. Exploring the effect of geometric coupling on friction and energy dissipation in rough contacts of elastic and viscoelastic coatings10.1016/j.jmps.2020.104273 ↗
9. Simulation of wear and effective friction properties of microstructured surfaces10.1016/j.wear.2020.203491 ↗
10. Effects of process parameters during turn-milling of microstructured surfaces on the coefficient of static friction10.1016/j.procir.2018.09.009 ↗
11. Priest, J., Ghadbeigi, H., Ayvar-Soberanis, S., and Liljerehn, A. (2021, January 15–17). Effects of coefficient of friction coupled with a deformation dependent friction model in cutting simulations. Proceedings of the 18th CIRP Conference on Modeling of Machining Operations, Ljubljana, Slovenia.10.1016/j.procir.2021.09.073 ↗
12. Investigating minor flank friction during precision micro cutting of commercially pure titanium via plunging tests with diamond grooving tools10.1016/j.jmatprotec.2021.117376 ↗
13. Zhang, X., Han, C., Luo, M., and Zhang, D. (2020). Tool Wear Monitoring for Complex Part Milling Based on Deep Learning. Appl. Sci., 10.10.3390/app10196916 ↗
14. Baptista, A. (2021). Wear Behavior of Uncoated and Coated Tools in Milling Operations of AMPCO (Cu-Be) Alloy. Appl. Sci., 11.10.3390/app11167762 ↗
15. Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO2 with MQL conditions10.1016/j.triboint.2020.106511 ↗
16. Gao, H., Liu, X., and Chen, Z. (2019). Cutting Performance and Wear/Damage Characteristics of PCBN Tool in Hard Milling. Appl. Sci., 9.10.3390/app9040772 ↗
17. Prediction of contact condition and surface damage by simulating variable friction coefficient and wear
18. Evaluation Method for Friction Coefficient of Machining Fluids Using Cutting Force in Micro Feed End Milling10.4028/www.scientific.net/AMM.894.158 ↗
19. Identification of a new friction model at tool-chip interface in dry orthogonal cutting10.1007/s00170-016-9149-4 ↗
20. Application of Grey theory in WEDM