Evaluation of a Novel Condition Indicator with Comparative Application to Hypoid Gear Failures
Source abstract
Abstract
This paper presents a condition monitoring methodology that uses a novel condition indicator (CI) algorithm, allowing for a confident assessment of system health and an advanced warning of failures. The CI is evaluated in the application of a specialized gear rig utilized for the high-cycle fatigue testing of hypoid gears. The CI is shown in this case study to ensure higher confidence in the prediction of failures than other algorithms, with variations in the results. In the comparison, consideration is given to the signal-to-noise ratio, the ability to differentiate between damages and/or damaged components and the sensitivity of the CI to the failure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Machine Fault Diagnosis Techniques · Mechanical Failure Analysis and Simulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Direct Line Kft., 2330 Dunaharaszti, Hungary
AVL List GmbH, 8020 Graz, Austria
iba AG, 90762 Fürth, Germany
IME (Institute of Machine Components), TU Graz (Graz University of Technology), 8010 Graz, Austria
References (27)
Show source-provided references
1. Ford, J. (The Engineer, 2017). Machine Downtime Costs UK Manufacturers £180bn a Year, The Engineer.
2. Williamson, J. (The Manufacturer, 2017). Downtime Costs UK Manufacturers £180bn a Year, The Manufacturer.
3. Mobley, R.K. (2002). An Introduction to Predictive Maintenance, Elsevier.10.1016/B978-075067531-4/50006-3 ↗
4. Dynamic Predictive Maintenance in industry 4.0 based on real time information: Case study in automotive industries10.1016/j.ifacol.2019.11.337 ↗
5. An overview of time-based and condition-based maintenance in industrial application10.1016/j.cie.2012.02.002 ↗
6. A predictive maintenance policy with imperfect monitoring10.1016/j.ress.2010.04.010 ↗
7. Nandi, A., and Ahmed, H. (2019). Condition Monitoring with Vibration Signals, John Wiley & Sons.10.1002/9781119544678 ↗
8. Rao, B. (1996). Handbook of Condition Monitoring, Elsevier.
9. Randall, R.B. (2011). Vibration-Based Condition Monitoring, John Wiley and Sons, Ltd.10.1002/9780470977668 ↗
10. Surányi, M. (2021). Condition Monitoring Methods for Powertrain Test Beds. [Ph.D. Thesis, Institute of Machine Components and Methods of Development, Technical University Graz].
11. The Japanese Society for Non-Destructive (2016). Practical Acoustic Emission Testing, Springer.10.1007/978-4-431-55072-3 ↗
12. Condition monitoring of a single-stage gearbox with artificially induced gear cracks utilizing on-line vibration and acoustic emission measurements10.1016/j.apacoust.2009.04.007 ↗
13. Early Fault Detection at Gear Units by Acoustic Emission and Wavelet Analysis
14. Mark, W.D. (2012). Performance-Based Gear Metrology, Wiley Online Library.10.1002/9781118357903 ↗
15. Development of a gear vibration indicator and its application in gear wear monitoring10.1016/j.ymssp.2016.01.018 ↗
16. Damage detection in gear systems using empirical mode decomposition10.1016/j.engstruct.2004.07.007 ↗
17. Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation10.1016/j.ymssp.2008.08.015 ↗
18. Transmission-error frequency-domain-behavior of failing gears10.1016/j.ymssp.2018.05.036 ↗
19. Klingelnberg, J. (2016). Bevel Gear, Springer.10.1007/978-3-662-43893-0 ↗
20. Schlecht, B. (2010). Maschinenelemente 2, Ing. Maschinenbau, Pearson Studium.
21. Braunstingl, M. (2012, December 03). Advanced Gear Optimization for AWD Systems. Available online: https://eawdcongress.com/download/braunstingl.pdf.
22. A simple frequency-domain algorithm for early detection of damaged gear teeth10.1016/j.ymssp.2010.04.004 ↗
23. Experimental study of failing differential gears and introduction of a new condition indicator for ultra low speed applications10.1016/j.ymssp.2020.107588 ↗
24. Klein, U. (2003). Schwingungsdiagnostische Beurteilung von Maschinen und Anlagen, Verl. Stahleisen. [3rd ed.].
25. Condition indicators for gearbox condition monitoring systems
26. Stewart, R. (1977). Some Useful Data Analysis Techniques for Gearbox Diagnostics. Machine Health Monitoring Group Report MHM, University of Southampton. Technical Report, R/10/77.
27. Bassett, D.E., and Houser, D.R. (1987). The Design and Analysis of Single Flank Transmission Error Tester for Loaded Gears, Ohio State Univ. Columbus Dept. of Mechanical Engineering. Technical Report.