Laboratory- and Semi-Industrial-Scale Thermomechanical Processing of TRIP-Aided Steel with Acicular Ferrite
Source abstract
Abstract
The modification of the deformation and cooling methods resulting in the obtainment of acicular ferrite promotes an increase in the proportion of retained austenite (RA) and a corresponding increase in mechanical properties in Si-Al TRIP-aided steel. The effect of controlled thermomechanical processing in laboratory- and semi-industrial scales on the possibility of obtaining acicular ferrite and a high fraction of retained austenite was investigated. The steel was hot deformed in three steps: at 1050, 900 and 750 °C to introduce dislocations into the hot-deformed pancake austenite. Next, slow cooling in a ferritic transformation region was performed, followed by isothermal holding of steel at 450 °C. The interrupted tensile tests at the strain levels of 5, 10 and 15% were performed to investigate the mechanical properties response and the stability of the obtained retained austenite. Light and scanning electron microscopy, XRD and EBSD analyses were performed to assess microstructural features. The produced material showed a multiphase microstructure containing acicular ferrite and 10% of retained austenite. The microstructures obtained in both production methods were slightly different due to high temperature inertia in the semi-industrial process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18A Konarskiego Street, 44-100 Gliwice, Poland
Funding
Silesian University of Technology · European Social Fund
References (49)
Show source-provided references
1. The Effect of Heating Rate and Soaking Time on Microstructure of an Advanced High Strength Steel10.1016/j.matchar.2019.109822 ↗
2. Deformation Mechanisms of a Novel Mn-Based 1 GPa TRIP/TWIP Assisted Lightweight Steel with 63% Ductility10.1016/j.msea.2020.140658 ↗
3. Bleck, W. (2002). Using the TRIP Effect—The Dawn of a Promising Group of Cold Formable Steels, Ghent University.
4. Magnetic and X-Ray Diffraction Measurements for the Determination of Retained Austenite in TRIP Steels10.1016/S0921-5093(01)00965-0 ↗
5. Stability of Retained Austenite in TRIP-Assisted Steels10.1179/026708304225011180 ↗
6. Microstructure–Property Relationships in TRIP Aided Medium-C Bainitic Steel with Lamellar Retained Austenite10.1179/1743284714Y.0000000742 ↗
7. Detailed study of the transformation mechanisms in ferrous TRIP aided steels10.1002/srin.200200200 ↗
8. Stabilization Mechanisms of Retained Austenite in Transformation-Induced Plasticity Steel10.1007/s11661-001-0240-5 ↗
9. Effect of Thermomechanical Treatment on the Corrosion Behaviour of Si- and Al-Containing High-Mn Austenitic Steel with Nb and Ti Micro-Additions10.17222/mit.2014.148 ↗
10. Strain-Induced Transformation Behaviour of Retained Austenite and Tensile Properties of TRIP-Aided Steels with Different Matrix Microstructure10.2355/isijinternational.46.316 ↗
11. Zhou, W., Hou, T., Zhang, C., Zhong, L., and Wu, K. (2018). Effect of Carbon Content in Retained Austenite on the Dynamic Tensile Behavior of Nanostructured Bainitic Steel. Metals, 8.10.3390/met8110907 ↗
12. Effect of Microstructure on the Stability of Retained Austenite in Transformation-Induced-Plasticity Steels10.1007/s11661-006-0213-9 ↗
13. Microstructural Comparison of the Thermomechanically Treated and Cold Deformed Nb-Microalloyed TRIP Steel
14. Thermomechanical Processing of Advanced High Strength Steels10.1016/j.pmatsci.2018.01.006 ↗
15. Conditions for the Occurrence of Acicular Ferrite Transformation in HSLA Steels10.1007/s10853-017-1781-3 ↗
16. Ferrite Formation Characteristics in Si-Mn TRIP Steels10.2355/isijinternational.37.583 ↗
17. Effect of Alloying Elements on the Microstructure-Property Relationship in Thermomechanically Processed C-Mn-Si TRIP Steels10.1002/srin.200200208 ↗
18. Transformation Behaviour in Thermomechanically Processed C–Mn–Si TRIP Steels with and without Nb10.1016/S0921-5093(99)00325-1 ↗
19. Innovative Processing of Obtaining Nanostructured Bainite with High Strength—High Ductility Combination in Low-Carbon-Medium-Mn Steel: Process-Structure-Property Relationship10.1016/j.msea.2018.01.120 ↗
20. Effect of Deformation Schedule on the Microstructure and Mechanical Properties of a Thermomechanically Processed C-Mn-Si Transformation-Induced Plasticity Steel10.1007/s11661-003-0305-8 ↗
21. Effect of Thermomechanical Processing on Mechanical Properties of Hot Rolled Multiphase Steel10.1016/S1006-706X(08)60012-6 ↗
22. Timokhina, I.B., Pereloma, E.V., Beladi, H., and Hodgson, P.D. (2008, January 10–12). A Study of the Strengthening Mechanism in the Thermomechanically Processed TRIP/TWIP. Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, Padua, Italy.
23. Effects of Volume Fraction and Stability of Retained Austenite on Formability in a 0.1C–1.5Si–1.5Mn–0.5Cu TRIP-Aided Cold-Rolled Steel Sheet10.1016/S0921-5093(03)00035-2 ↗
24. Pashangeh, S., Karimi Zarchi, H.R., Ghasemi Banadkouki, S.S., and Somani, M.C. (2019). Detection and Estimation of Retained Austenite in a High Strength Si-Bearing Bainite-Martensite-Retained Austenite Micro-Composite Steel after Quenching and Bainitic Holding (Q&b). Metals, 9.10.3390/met9050492 ↗
25. Grajcar, A., Kilarski, A., and Kozlowska, A. (2018). Microstructure–Property Relationships in Thermomechanically Processed Medium-Mn Steels with High al Content. Metals, 8.10.3390/met8110929 ↗
26. Property Related Design of Advanced Cold Rolled Steels with Induced Plasticity
27. A New Frontier in Microalloying: Advanced High Strength, Coated Sheet Steels10.4028/www.scientific.net/MSF.500-501.27 ↗
28. Effect of Microstructure on Tensile Behavior and Mechanical Stability of Retained Austenite in a Cold-Rolled Al-Containing TRIP Steel10.1007/s40195-019-00890-7 ↗
29. Comparison of Thermo-Mechanical Treatment of C-Mn-Si-Nb and C-Mn-Si-Al-Nb TRIP Steels10.1016/j.proeng.2017.10.951 ↗
30. Structure–Properties Relationship in TRIP Steels Containing Carbide-Free Bainite10.1016/j.cossms.2004.10.002 ↗
31. Effects of Morphology and Stability of Retained Austenite on the Ductility of TRIP-Aided Bainitic Steels10.2355/isijinternational.48.1256 ↗
32. Acicular Ferrite Formation and Its Influencing Factors-A Review
33. Semi-Industrial Simulation of in-Line Thermomechanical Processing and Heat Treatment of Nano-Duplex Bainite-Austenite Steel
34. Laws for Work-Hardening and Low-Temperature Creep10.1115/1.3443340 ↗
35. Quantification of Retained Austenite by X-Ray Diffraction and Saturation Magnetization in a Supermartensitic Stainless Steel10.1016/j.matchar.2016.03.023 ↗
36. Effect of Alloyin Additions on the Lattice Parameter of Austenite
37. Phase Transformation, Microstructure, and Mechanical Properties of X100 Pipeline Steels Based on TMCP and HTP Concepts10.1007/s10853-016-0459-6 ↗
38. In Situ TEM Study of the Effect of M/A Films at Grain Boundaries on Crack Propagation in an Ultra-Fine Acicular Ferrite Pipeline Steel10.1016/j.actamat.2005.09.015 ↗
39. Sheet Metal Forming Behaviour and Mechanical Properties of TRIP Steels10.1002/srin.199905669 ↗
40. Retained Austenite Attributes and Mechanical Performance of Different Compositions of TRIP Steel Alloys10.1007/s11665-019-04010-5 ↗
41. Retained austenite and mechanical properties in bainite transformed low alloy steels10.1002/srin.199501150 ↗
42. Effects of Silicon and Manganese Addition on Mechanical Properties of High-Strength Hot-Rolled Sheet Steel Containing Retained Austenite10.2355/isijinternational.31.992 ↗
43. Effects of Nb and Mo Addition to 0.2%C-1.5%Si-1.5%Mn Steel on Mechanical Properties of Hot Rolled TRIP-Aided Steel Sheets10.2355/isijinternational.44.1590 ↗
44. Mertens, A., Jacques, P.J., Harlet, P., and Delannay, F. (2021, October 12). On the Optimisation of the Mechanical Properties of Two Aluminium-Alloyed Multiphase TRIP-Assisted Steels. Available online: http://hdl.handle.net/2268/105216.
45. Comparison of the Effects of Silicon and Aluminium on the Tensile Behaviour of Multiphase TRIP-Assisted Steels10.1016/S1359-6462(00)00697-7 ↗
46. Effects of Second Phase Morphology on Retained Austenite Morphology and Tensile Properties in a TRIP-Aided Dual-Phase Steel Sheet10.2355/isijinternational.33.775 ↗
47. Warm Stretch-Formability of TRIP-Aided Dual-Phase Sheet Steels10.2355/isijinternational.35.1407 ↗
48. Microstructure and Texture Changes in a Low-Alloyed TRIP-Aided Steel Induced by Small Plastic Deformation10.2355/isijinternational.46.302 ↗
49. A Study of Microstructure, Transformation Mechanisms and Correlation between Microstructure and Mechanical Properties of a Low Alloyed TRIP Steel10.1016/j.actamat.2004.02.044 ↗