Effect of annealing on combined forming, fracture and wrinkling limit diagram of Aluminium 5086 alloy sheets
Source abstract
Abstract
In this work, a combined forming, fracture and wrinkling limit diagram have been experimentally evaluated for Aluminium 5086 alloy sheet annealed at three different temperatures namely 200, 250 and 300°C. With the help of the above diagrams, the safe range which avoids necking, fracture and wrinkles during forming of Aluminium 5086 alloy sheets were examined and the effect of annealing temperature on this range and other parameters namely microstructure, tensile properties and formability parameters were studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Rangaraju, N., Raghuram, T., Vamsi Krishna, B., Prasad Rao, K., Venugopal, P.: Effect of cryo-rolling and annealing on microstructure and properties of commercially pure aluminium. Mater. Sci. Eng. A. 398, 246–251 (2005).10.1016/j.msea.2005.03.026 ↗
2. Takuda, H., Yamazaki, N., Hatta, N., Kikuchi, S.: Influence of cold-rolling and annealing conditions on formability of aluminium alloy sheet. J. Mater. Sci. 30, 957–963 (1995).10.1007/BF01178430 ↗
3. Ravi Kumar, D., Swaminathan, K.: Formability of two aluminium alloys. Mater. Sci. Technol. 15, 1241–1252 (1999).10.1179/026708399101505347 ↗
4. Mazilu, P.: Prediction of wrinkling instabilities by long wave length perturbation in thin sheet metal form. In: Predeleanu, M. (ed.) Computational Methods for Predicting Material Processing Defects, pp. 263–274. Elsevier, Amsterdam (1987).10.1016/B978-0-444-42859-2.50030-2 ↗
5. Narayanasamy, R., Sowerby, R.: Forming behaviour of some sheet steel materials when drawn through a conical die. J. Mater. Proc. Technol. 39, 43–53 (1993).10.1016/0924-0136(93)90007-S ↗
6. Szacinzki, A.M., Thomson, P.F.: Investigation of the existence of a wrinkling-limit curve in plasticity—deforming metal sheet. J. Mater. Proc. Technol. 25, 125–137 (1991a).10.1016/0924-0136(91)90085-S ↗
7. Szacinzki, A.M., Thomson, P.F.: Comparison of effect of material properties on growth of wrinkles in sheet metal during forming and their removal. J. Mater. Proc. Technol. 7, 224–227 (1991b).10.1179/mst.1991.7.3.224 ↗
8. Loganathan, C., Narayanasamy, R.: Effect of mechanical properties on the wrinkling behaviour of three different commercially pure aluminium grades when drawn through conical and Tractrix dies. J. Mater. Sci. Eng. 406, 229–253 (2005).10.1016/j.msea.2005.06.037 ↗
9. Wang, X.F., Lee, L.H.N.: Wrinkling of an unevenly stretched sheet metal. J. Eng. Mater. Technol. 111, 235–242 (1989).10.1115/1.3226460 ↗
10. Narayanasamy, R., Sowerby, R.: Wrinkling of sheet metals when drawing through a conical die. J. Mater. Proc. Technol. 41, 275–290 (1994).10.1016/0924-0136(94)90166-X ↗
11. Karima, M., Sowerby, R.: “Report No.144” Faculty of Engineering, McMaster University, Hamilton, Ontario, Canada (1980).
12. Di, S., Thomson, P.F.: Neural network approach for prediction of wrinkling limit in square metal sheet under diagonal tension. J. Testing Eval. JTEVA 25(1), 74–81 (1997).10.1520/JTE11327J ↗
13. Wang, J.,Wu, X., Thomson, P.F., Flitman, A.: A neural networks approach to investigating the geometrical influence on wrinkling in sheet metal forming. J. Mater. Proc. Technol. 105, 215–220 (2000).10.1016/S0924-0136(00)00534-3 ↗
14. Youngsuk, K., Youngjin, S.: Study on wrinkling limit diagram of anisotropic sheet metals. J. Mater. Proc. Technol. 97, 88–94 (2000).10.1016/S0924-0136(99)00346-5 ↗
15. Keeler, S.P.: Determination of forming limits in automotive stampings. Sheet. Met. Ind. 42, 683–691 (1965).
16. Goodwin, G.M.: Application of strain analysis to sheet metal forming problems in the press shop. Metall. Italiana. 60, 764–774 (1968).
17. Hecker, S.S.: Simple technique for determining forming limit curves, sheet Met. Ind. 53, 671–675 (1975).
18. Butuc, M.C., Gracio, J.J., Barata da Rocha, A.: A theoretical study on forming limits prediction. J. Mater. Process. Technol. 142, 714–724 (2003).10.1016/S0924-0136(03)00813-6 ↗
19. Avila, A.F., Vieira, E. L. S.: Proposing a better forming limit diagram prediction: a comparative study. J. Mater. Process. Technol. 141, 101–108 (2003).10.1016/S0924-0136(03)00162-6 ↗
20. Chow, C.L., Jie, M.: Forming limits of Al 6022 sheets with material damage consideration, theory and experimental validation. Int. J. Mech. Sci. 46, 99–122 (2004).10.1016/j.ijmecsci.2004.02.003 ↗
21. Narayanasamy, R.: PhD thesis “Drawability of sheet metals through Conical and Tractrix dies”, Regional Engineering College , Tiruchirappalli-620 015, India (1992).
22. Narayanasamy, R., Sathiyanarayanan, C.: Report of FLD on IF steels submitted to TISCO. National Institute of Technology, Tiruchirappalli, Tamilnadu, India (2004).