Kinematics and error analysis of cooperative cable parallel manipulators for multiple mobile cranes
Source abstract
Abstract
Combining mobile cranes with the cable parallel manipulators (CPMs), a cooperative CPMs for multiple mobile cranes (CPMMCs) was designed in this paper. The kinematics were derived on the basis of the configuration of the CPMMCs, aiming at numerical estimation of workspace subject to the constraints on the cable tensions and mobile cranes’ structure. Kinematic error, caused by machining, assembly and operation, is one of the major error sources for CPMMCs during high-precision hoisting, which can be estimated by means of error modeling. Kinematics error model was established based on closed-loop vector method. The influences of different error sources on the accuracy are investigated with sensitivity analysis in statistics. Finally, the system is simulated with expected trajectory of the payload based on the established kinematics and error model of the CPMMCs. The simulation results not only provide rationale for design of the CPMMCs, but also of certain guiding significance in practical engineering application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Robotic Mechanisms and Dynamics · Dynamics and Control of Mechanical Systems · Soft Robotics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Albus, J.S., Bostelman, R.V., Dagalakis, N.: The NIST Robocrane. J. Robot. Syst. 10(5), 709–724 (1993)10.1002/rob.4620100509 ↗
2. Alikhani, A., Behzadipour, S., Alasty, A., Vanini, S.A.S.: Design of a large-scale cable-driven robot with translational motion. Robot. Comput. Integr. Manuf. 27(2), 357–366 (2011)10.1016/j.rcim.2010.07.019 ↗
3. Bouchard, S., Gosselin, C.M.: Workspace optimization of a very large cable-driven parallel mechanism for a radio telescope application. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Las Vegas, USA (2007)10.1115/DETC2007-34286 ↗
4. Caro, S., Binaud, N., Wenger, P.: Sensitivity analysis of 3-RPR planar parallel manipulators. J. Mech. Des. 131(12), 1–13 (2009)10.1115/1.4000216 ↗
5. Castelli, G., Ottaviano, E., Rea, P.: A Cartesian Cable-Suspended Robot for improving end-users’ mobility in an urban environment. Robot. Comput. Integr. Manuf. 30(3), 335–343 (2014)10.1016/j.rcim.2013.11.001 ↗
6. Duan, B.Y., Qiu, Y.Y., Zhang, F.S., Zi, B.: On design and experiment of the feed cable-suspended structure for super antenna. Mechatronics 19(4), 503–509 (2009)10.1016/j.mechatronics.2008.11.018 ↗
7. Fahham, H.R., Farid, M., Khooran, M.: Time optimal trajectory tracking of redundant planar cable-suspended robots considering both tension and velocity constraints. ASME J. Dyn. Syst. Meas. Control 133(1), 011004 (2011)10.1115/1.4002712 ↗
8. Gouttefarde, M., Daney, D., Merlet, J.-P.: Interval-analysis-based determination of the wrench-feasible workspace of parallel cable-driven robots. IEEE Trans. Robot. 27(1), 1–13 (2011)10.1109/TRO.2010.2090064 ↗
9. He, R.B., Zhao, Y.J., Yang, S.N., Yang, S.Z.: Kinematic-parameter identification for serial-robot calibration based on POE formula. IEEE Trans. Robot. 26(3), 411–423 (2010)10.1109/TRO.2010.2047529 ↗
10. Heikkilä, M., Linjama, M.: Displacement control of a mobile crane using a digital hydraulic power management system. Mechatronics 23(4), 452–461 (2013)10.1016/j.mechatronics.2013.03.009 ↗
11. Huang, T., Li, Y., Tang, G.B., Li, S.W., Zhao, X.Y., Whitehouse, D.J., Chetewyn, D.G.: Error modeling, sensitivity analysis and assembly process of a class of 3 DOF parallel kinematic machines with parallelogram struts. Sci. China (Series E) 45(5), 467–476 (2002)10.1360/02ye9054 ↗
12. Klosinski, J.: Swing-free stop control of the slewing motion of a mobile crane. Control Eng. Pract. 13(4), 451–460 (2005)10.1016/j.conengprac.2004.04.007 ↗
13. Lau, D., Oetomo, D., Halgamuge, S.K.: Wrench-closure workspace generation for cable driven parallel manipulators using a hybrid analytical–numerical approach. ASME J. Mech. Des. 133(7), 071004 (2011)10.1115/1.4004222 ↗
14. Lin, M.-T., Wu, S.-K.: Modeling and analysis of servo dynamics errors on measuring paths of five-axis machine tools. Int. J. Mach. Tools Manuf. 66(3), 1–14 (2011)
15. Marc, A.: Workspace and stiffness analysis of a three-degree-of-freedom spatial cable-suspended parallel mechanism while considering cable mass. Mech. Mach. Theory 66(3), 1–13 (2011)
16. McCarthy, J.M.: 21st century kinematics: synthesis, compliance, and tensegrity. ASME J. Mech. Robot. 3(2), 020201 (2011)10.1115/1.4003181 ↗
17. Michael, N., Fink, J., Kumar, V.: Cooperative manipulation and transportation with aerial robots. Auton. Robot. 30(1), 73–86 (2011)10.1007/s10514-010-9205-0 ↗
18. Oh, S.R., Agrawal, S.K.: Cable suspended planar robots with redundant cables: controllers with positive tensions. IEEE Trans. Robot. 21(3), 457–465 (2005)10.1109/TRO.2004.838029 ↗
19. Otis, M.J.-D., Perreault, S., Nguyen-Dang, T.-L., Lambert, P., Gouttefarde, M., Laurendeau, D., Gosselin, C.: Determination and management of cable interferences between two 6-DOF foot platforms in a cable-driven locomotion interface. IEEE Trans. Syst. Man Cybern. A Syst. Hum. 39(3), 528–544 (2009)10.1109/TSMCA.2009.2013188 ↗
20. Perreault, S., Cardou, P., Gosselin, C.M., Otis, M.J.-D.: Geometric determination of the interference-free constant-orientation workspace of parallel cable-driven mechanisms. ASME J. Mech. Robot. 2(3), 031016 (2010)10.1115/1.4001780 ↗
21. Uddin, M.S., Ibaraki, S., Matsubara, A., Matsushita, T.: Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors. Precis. Eng. J. Int. Soc. Precis. Eng. Nanotechnol. 33(2), 194–201 (2009)
22. Wang, Y.B., Wu, H.P., Handroos, H.: Accuracy improvement of a hybrid robot for ITER application using POE modeling method. Fusion Eng. Des. 88(9–10), 1877–1880 (2013)10.1016/j.fusengdes.2013.02.069 ↗
23. Xu, Q.S., Li, Y.M.: Error analysis and optimal design of a class of translational parallel kinematic machine using particle swarm optimization. Robotica 27(1), 67–78 (2009)10.1017/S0263574708004530 ↗
24. Yamamoto, M., Yanai, N., Mohri, A.: Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics. IEEE Trans. Robot. 20(5), 840–850 (2004)10.1109/TRO.2004.829501 ↗
25. Yang, Y., Zhang, Y.R., Lemaire-Semail, B.: A new planar 4-DOF spring and cable driven force feedback device. In: Lecture Notes in Computer Science, vol. 6192, pp. 237–242 (2010)10.1007/978-3-642-14075-4_34 ↗
26. Zhang, D., Su, X.M., Gao, Z., Qian, J.J.: Design, analysis and fabrication of a novel three degrees of freedom parallel robotic manipulator with decoupled motions. Int. J. Mech. Mater. Des. 9(3), 199–212 (2013)10.1007/s10999-012-9209-3 ↗
27. Zi, B., Zhu, Z.C., Du, J.L.: Analysis and control of the cable-supporting system including actuator dynamics. Control Eng. Pract. 19(5), 491–501 (2011)10.1016/j.conengprac.2011.02.001 ↗
28. Zi, B., Qian, S., Ding, H.F., Kecskeméthy, A.: Design and analysis of cooperative cable parallel manipulators for multiple mobile cranes. Int. J. Adv. Robot. Syst. 9(207), 1–10 (2012a)
29. Zi, B., Wu, X., Lin, J., Zhu, Z.C.: Inverse kinematics and singularity analysis for a 3-DOF hybrid-driven cable-suspended parallel robot. Int. J. Adv. Robot. Syst. 9(133), 1–9 (2012b)
30. Zi, B., Ding, H.F., Wu, X., Kecskeméthy, A.: Error modeling and sensitivity analysis of a hybrid-driven based cable parallel manipulator. Precis. Eng. 1(38), 197–211 (2014)10.1016/j.precisioneng.2013.06.002 ↗