Proximate Time-Optimal Servomechanism Based on Transition Process for Electro-Optical Set-Point Tracking Servo System
Source abstract
Abstract
Set-point tracking servo systems encounter the problem of the trade-off between the swiftness and smoothness in tracking task. To deal with this problem, the proximate time-optimal servomechanism based on transition process (PTSTP) is proposed in this paper. The PTSTP control scheme incorporates a transition process (TP) into the framework of proximate time-optimal servomechanism (PTOS) to eliminate the conservatism of the original PTOS without the controller changing. The target position signal amplitude and the ultimate ability of actuator are utilized to design the time-optimal TP to make the jumping target position signal turns to a smooth signal, which can significantly reduce system overshoot. Therefore, the system swiftness and smoothness performance are guaranteed by PTSTP. Then, the stability of the proposed method is analyzed theoretically. Finally, the experimental results show that the controlled system is able to track the target position signal with different amplitude fast and smoothly in an electro-optical set-point tracking servo system.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Iterative Learning Control Systems · Extremum Seeking Control Systems · Advanced Control and Stabilization in Aerospace Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Optical Engineering, Chinese Academy of Sciences, Chengdu 610209, China
Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China
University of Chinese Academy of Sciences, Beijing 100049, China
References (30)
Show source-provided references
1. A new approach to the design of mode switching control in hard disk drive servo systems10.1016/S0967-0661(02)00037-0 ↗
2. Kim, J.H., Choi, J.W., and Sul, S.K. (2002, January 2–5). High precision position control of linear permanent magnet synchronous motor for surface mount device placement system. Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No. 02TH8579), Osaka, Japan.
3. Deng, C., Mao, Y., and Ren, G. (2016). MEMS inertial sensors-based multi-loop control enhanced by disturbance observation and compensation for fast steering mirror system. Sensors, 16.10.3390/s16111920 ↗
4. Stabilization control of electro-optical tracking system with fiber-optic gyroscope based on modified smith predictor control scheme10.1109/JSEN.2018.2835147 ↗
5. Design & implementation of a dual axis solar tracking system
6. Satellite-based entanglement distribution over 1200 kilometers10.1126/science.aan3211 ↗
7. Observer-based intensity-feedback control for laser beam pointing and tracking
8. Liu, H., and Yu, H. (2018). Finite-Time Control of Continuous-Time Networked Dynamical Systems. IEEE Trans. Syst. Man Cybern. Syst.
9. Stability and stabilisation of a class of networked dynamic systems10.1080/00207721.2018.1433898 ↗
10. Robust time-optimal control of constrained linear systems10.1016/S0005-1098(97)00157-X ↗
11. Interpolated robust time-optimal controllers for linear systems10.1049/iet-cta:20070001 ↗
12. Workman, M.L., Kosut, R.L., and Franklin, G.F. (1987, January 10–12). Adaptive proximate time-optimal servomechanisms: Continuous time case. Proceedings of the 1987 American Control Conference, Minneapolis, MN, USA.10.1109/CDC.1987.272675 ↗
13. Workman, M.L., Kosut, R.L., and Franklin, G.F. (1987, January 9–11). Adaptive proximate time-optimal servomechanisms: Discrete-time case. Proceedings of the 26th IEEE Conference on Decision and Control, Los Angeles, CA, USA.10.1109/CDC.1987.272675 ↗
14. Chong, S., and Foo, J. (2018, January 18–21). Comparative Evaluation of Positioning Performance for a Direct Drive System: CM NCTF versus PTOS. Proceedings of the 2018 15th International Conference on Control, Automation, Robotics and Vision (ICARCV), Singapore.10.1109/ICARCV.2018.8581226 ↗
15. A discrete-time framework for proximate time-optimal performance of damped servomechanisms10.1016/j.mechatronics.2016.04.003 ↗
16. Braker, R.A., and Pao, L.Y. (2015, January 21–23). Proximate time-optimal control of a second-order flexible structure. Proceedings of the 2015 IEEE Conference on Control Applications (CCA), Sydney, Australia.10.1109/CCA.2015.7320722 ↗
17. Improved control design methods for proximate time-optimal servomechanisms10.1109/TMECH.2011.2158110 ↗
18. Improved proximate time-optimal sliding-mode control of hard disk drives10.1049/ip-cta:20010694 ↗
19. An observer-based mode switching control scheme for improved position regulation in servomotors10.1109/TCST.2013.2292992 ↗
20. Modified damping scheduling proximate time optimal servomechanism for improvements in short strokes in hard disk drives10.1109/TMAG.2008.918826 ↗
21. Jeyasenthil, R., and Choi, S.B. (2019). A new anti-windup compensator based on quantitative feedback theory for an uncertain linear system with input saturation. Appl. Sci., 9.10.3390/app9152958 ↗
22. Radac, M.B., and Precup, R.E. (2019). Data-Driven model-free tracking reinforcement learning control with VRFT-based adaptive actor-critic. Appl. Sci., 9.10.3390/app9091807 ↗
23. Distributed anti-windup approach for consensus tracking of second-order multiagent systems with input saturation10.1016/j.sysconle.2019.06.002 ↗
24. A novel damping scheduling scheme for proximate time optimal servomechanisms in hard disk drives10.1109/TMAG.2005.862764 ↗
25. Anti-windup design: An overview of some recent advances and open problems10.1049/iet-cta:20070435 ↗
26. Improving the rapidity of nonlinear tracking differentiator via feedforward10.1109/TIE.2013.2262754 ↗
27. Berkovitz, L.D. (2013). Optimal Control Theory, Springer Science & Business Media.10.1201/b12739 ↗
28. Dorf, R.C., and Bishop, R.H. (2011). Modern Control Systems, Pearson.
29. Evaluation and tuning of robust PID controllers10.1049/iet-cta:20060450 ↗
30. Inertial sensor-based multiloop control of fast steering mirror for line of sight stabilization10.1117/1.OE.55.11.111602 ↗