Bending stress analysis of eccentric straight and helical curve-face gear pair
Source abstract
Abstract
As a new type of gear transmission developed in recent years, curve-face gear transmission has not appeared before. In order to solve the problem of root bending strength of the eccentric straight and helical curve face gear, a calculating method of the tooth root bending strength was proposed. According to the principle of space meshing, differential geometry and design of machinery, the parametric equations of pitch curve was obtained, the pressure angle and the contact ratio in the meshing process were derived. The plane equivalent pitch curve was obtained, and the formula for calculating the equivalent tooth form factor and the equivalent stress correction factor was acquired. The calculation method of the bending strength of the gear pair was established, and the influence of the basic structural parameters on the bending stress was also analyzed in detail. The position of the stress hazard of the eccentric curve-face gear was determined. Through the finite element analysis and transmission experiment, the accuracy of the calculation method of strength of the gear pair was verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Cai, Z.: Study on the time-varying meshing design and characteristics analysis of curve-face gear drive. Chongqing University (2017). (in Chinese)10.1201/9781315386829-76 ↗
2. Cai, Z., Lin, C.: Design and analysis of cleaning mechanism for an intermittent screw-driven pipeline robot. J. Mech. Sci. Technol. 31(2), 911–921 (2017). https://doi.org/10.1007/s12206-017-0144-y10.1007/s12206-017-0144-y ↗
3. Cao, X.: Error detection and analysis method for curve-face gear. Chongqing University (2015). (in Chinese)
4. Cheng, D.X.: Handbook of Mechanical Design. China Industry Press, Beijing (2008). (in Chinese)
5. Fan, Y.: Machining methods of orthogonal variable transmission ratio curve-face gear. Chongqing University (2015). (in Chinese)
6. He, C., Lin, C.: Analysis of loaded characteristics of helical curve face gear. Mech. Mach. Theory 115, 267–282 (2017). https://doi.org/10.1016/j.mechmachtheory.2017.05.01410.1016/j.mechmachtheory.2017.05.014 ↗
7. Huang, C.: Tooth root bending strength analysis and experimental study of curve-face gear. Chongqing University (2017). (in Chinese)
8. Lin, C., Liu, Y.: Characteristic analysis and application of composite motion curve-face gear pair. J. Braz. Soc. Mech. Sci. Eng. 38(6), 1797–1804 (2016). https://doi.org/10.1007/s40430-015-0432-310.1007/s40430-015-0432-3 ↗
9. Lin, C., Nie, L.: Strength calculation method of eccentric-high order elliptical bevel gear pair. J. Mech. Eng. 49(05), 47–54 (2013). https://doi.org/10.3901/jme.2013.05.047 . (in Chinese)10.3901/jme.2013.05.047 ↗
10. Lin, C., Wu, X.: Calculation and analysis of contact ratio of helical curve-face gear pair. J. Braz. Soc. Mech. Sci. Eng. 39(6), 2269–2278 (2017). https://doi.org/10.1007/s40430-017-0769-x10.1007/s40430-017-0769-x ↗
11. Lin, C., Zeng, D.: Design, generation and tooth width analysis of helical curve-face gear. J. Adv. Mech. Des. Syst. Manuf. 9(5), M66 (2015). https://doi.org/10.1299/jamdsm.2015jamdsm006610.1299/jamdsm.2015jamdsm0066 ↗
12. Lin, C., Gong, H., Nie, N.: Geometry design, three-dimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 227(4), 779–793 (2012). https://doi.org/10.1177/095440621245338210.1177/0954406212453382 ↗
13. Lin, C., Zhao, X., Zeng, D.: Constructing principle and design of curved-face gear coupling. J. Central South Univ. (Science and Technology) 47(11), 3707–3714 (2016). https://doi.org/10.11817/j.issn.1672-7207.2016.11.013 . (in Chinese)10.11817/j.issn.1672-7207.2016.11.013 ↗
14. Lin, C., Wu, X., Wei, Y.: Design and characteristic analysis of eccentric helical curve-face gear. J. Adv. Mech. Des. Syst. Manuf. (2017). https://doi.org/10.1299/jamdsm.2017jamdsm001110.1299/jamdsm.2017jamdsm0011 ↗
15. Lin, C., He, C., Hu, Y.: Analysis on the kinematical characteristics of compound motion curve-face gear pair. Mech. Mach. Theory 128, 298–313 (2018). https://doi.org/10.1016/j.mechmachtheory.2018.06.00410.1016/j.mechmachtheory.2018.06.004 ↗
16. Wang, Y., Lin, C.: Bending stress analysis of orthogonal curve-face gear. J. Adv. Mech. Des. Syst. Manuf. 10(1), JAMDSM0015 (2016). https://doi.org/10.1299/jamdsm.2016jamdsm001510.1299/jamdsm.2016jamdsm0015 ↗
17. Wang, Z., Liu, R., Lin, J.C., et al.: Optimized face gear and its bending stress analysis. Adv. Mater. Res. 381, 5 (2011). https://doi.org/10.4028/www.scientific.net/AMR.381.8110.4028/www.scientific.net/AMR.381.81 ↗
18. Wang, Y., Wu, C., Gong, K., et al.: Loaded tooth contact analysis of orthogonal face-gear drives. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 226(9), 2309–2319 (2012). https://doi.org/10.1177/095440621143297610.1177/0954406211432976 ↗
19. Zhao, X.: Analysis of characteristics of double curve-face gear piston pump composite transmission. Chongqing University (2016). (in Chinese)
20. Zhou, C., Huang, F., Han, X., et al.: An elastic–plastic asperity contact model and its application for micro-contact analysis of gear tooth profiles. Int. J. Mech. Mater. Des. 13(3), 335–345 (2017). https://doi.org/10.1007/s10999-016-9338-110.1007/s10999-016-9338-1 ↗