Lateral–torsional buckling of porous orthotropic thin-walled I-beams under non-uniform transverse loadings: a higher-order shear deformation approach
Source abstract
Abstract
Abstract Porous orthotropic thin-walled I-beams (TWI-Bs) are commonly used in aerospace, civil, and mechanical applications due to their high stiffness-to-weight ratio. However, accurately predicting their lateral-torsional buckling (LTB) behavior remains challenging, especially under non-uniform loading and in the presence of material porosity and orthotropy. Classical beam theories often fail to capture essential deformation mechanisms, particularly shear deformation and warping effects, which become significant in porous and thin-walled configurations. This study develops a novel analytical model for evaluating the LTB response of porous orthotropic doubly symmetric I-beams subjected to non-uniformly distributed transverse loadings. To the author’s knowledge, this study is among the first to integrate an HSDT-based thin-walled beam formulation with porosity-dependent orthotropic constitutive modeling to the elastic lateral–torsional buckling of thin-walled I-beams under various non-uniform transverse loadings. Three trigonometric-based non-uniform porosity distribution patterns are considered. The solution is obtained using Galerkin’s method, and the model is validated against available benchmark solutions. The results reveal that neglecting higher-order shear deformation leads to a significant overestimation of critical buckling loads, especially for beams with high porosity or under non-uniform loading conditions. Among porosity patterns, NUDP1 yields the highest buckling resistance, whereas NUDP2 results in the lowest. The position of the applied load and its distribution type (e.g., TRL, TGL) substantially influence the LTB behavior, particularly in shear-sensitive configurations. Geometric parameters, such as flange and web thickness ratios and the orthotropy ratio, further interact with porosity and loading to affect buckling performance. These findings underscore the importance of incorporating advanced shear deformation models and realistic porosity distributions to ensure accurate LTB predictions and a robust structural design.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Cellular and Composite Structures · Aeroelasticity and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Liu Y, et al.: “Analytical Solution for Lateral-Torsional Buckling of Concrete-Filled Tubular Flange Girders with Torsional Bracing”. In: Advances in Civil Engineering 2020 . https://doi.org/10.1155/2020/4340381 (2020)10.1155/2020/4340381 ↗
2. Tian, L., et al.: Lateral torsional buckling strength of steel i-beams within preflexed beams in pre-bending stage. Adv. Steel Construct. 16(1), 47–54 (2020). https://doi.org/10.18057/IJASC.2020.16.1.610.18057/IJASC.2020.16.1.6 ↗
3. Ferreira, F.P.V., Martins, C.H.: LRFD for Lateral-Torsional Buckling Resistance of Cellular Beams. Int. J. Civil Eng. 18(3), 303–323 (2020). https://doi.org/10.1007/s40999-019-00474-710.1007/s40999-019-00474-7 ↗
4. Pezeshky, P., et al.: Generalization of the Vlasov theory for lateral torsional buckling analysis of built-up monosymmetric assemblies. Eng. Struct. (2020). https://doi.org/10.1016/j.engstruct.2020.11105510.1016/j.engstruct.2020.111055 ↗
5. Rasheed, H.A., Ahmadi, H., Halim, A.H.: Stability of Thin Web Composite Cantilever Beams of Random Lamination. Int. J. Struct. Stability Dynamics 20, 13 (2020). https://doi.org/10.1142/S021945542041016310.1142/S0219455420410163 ↗
6. Rezaiee-Pajand, M., Masoodi, A.R., Alepaighambar, A.: Critical buckling moment of functionally graded tapered mono-symmetric I-beam. Steel Composite Struct 39(5), 599–614 (2021). https://doi.org/10.12989/scs.2021.39.5.59910.12989/scs.2021.39.5.599 ↗
7. Saoula, A., et al.: Simplified analytical method for lateral torsional buckling assessment of RHS beams with web openings. Structures 34, 2848–2860 (2021). https://doi.org/10.1016/j.istruc.2021.09.03410.1016/j.istruc.2021.09.034 ↗
8. Soltani, M., et al.: Multi-objective optimization of lateral stability strength of transversely loaded laminated composite beams with varying I-section. J. Composite Mater. 56(12), 1921–1939 (2022). https://doi.org/10.1177/0021998322108894310.1177/00219983221088943 ↗
9. Oguaghamba, O.A., et al.: Ritz Variational Method for Solving the Elastic Buckling Problems of Thin-Walled Beams with Bisymmetric Cross-Sections. Math. Model. Eng. Problems 10(1), 129–138 (2023). https://doi.org/10.18280/MMEP.10011410.18280/MMEP.100114 ↗
10. Haffar, M.Z., Horáček, M., Ádány, S.: Analytical GNI Analysis for Lateral-torsional Behavior of Thin-walled Beams with Doubly-symmetric I-Sections. Periodica Polytechnica Civil Eng. 67(1), 211–223 (2023). https://doi.org/10.3311/PPci.2102810.3311/PPci.21028 ↗
11. Abdelkader, S., Benyamina, A.B., Ahmed, M.S.: Analytical study of elastic lateral-torsional buckling of castellated steel beams under combined axial and bending loads. Steel and Composite Struct. 52(3), 343–356 (2024). https://doi.org/10.12989/scs.2024.52.3.34310.12989/scs.2024.52.3.343 ↗
12. Lebastard, M., et al.: Lateral-torsional buckling of uniform and tapered welded I-section beams. Eng. Struct. (2024). https://doi.org/10.1016/j.engstruct.2023.11730110.1016/j.engstruct.2023.117301 ↗
13. Hanwen, L., et al.: Lateral-torsional buckling of arches under an arbitrary radial point load in a thermal environment incorporating shear deformations. Eng. Struct. 179, 189–203 (2019). https://doi.org/10.1016/j.engstruct.2018.10.07110.1016/j.engstruct.2018.10.071 ↗
14. Gomes, J.O., et al.: Lateral-torsional buckling resistance of non-prismatic and prismatic mono-symmetric I-section steel beams based on stress utilization. Eng. Struct. (2024). https://doi.org/10.1016/j.engstruct.2024.11775810.1016/j.engstruct.2024.117758 ↗
15. Bresser, D., Ravenshorst, G.J.P., Hoogenboom, P.C.J.: General formulation of equivalent moment factor for elastic lateral torsional buckling of slender rectangular sections and I-sections. Eng. Struct. (2020). https://doi.org/10.1016/j.engstruct.2020.11023010.1016/j.engstruct.2020.110230 ↗
16. Tebo, E.T., Masu, L., Nziu, P.: Inelastic lateral-torsional buckling load on fixed circular channels arches under transverse point load. Int. J. Eng. Res. Technol. 13(10), 2851–2863 (2020). https://doi.org/10.37624/IJERT/13.10.2020.2851-286310.37624/IJERT/13.10.2020.2851-2863 ↗
17. Tebo, E.T., Masu, L., Nziu, P.: Comparison between elastic and inelastic lateral torsional buckling load on circular fixed channel section arches under transverse point load. Int. J. Eng. Res. Technol. 13(9), 2239–2254 (2020)10.37624/IJERT/13.9.2020.2239-2254 ↗
18. Du, Y., Doudak, G., Mohareb, M.: Effect of beam-deck connection flexibility on lateral torsional buckling strength of wooden twin-beams. Eng. Struct. (2020). https://doi.org/10.1016/j.engstruct.2020.11022610.1016/j.engstruct.2020.110226 ↗
19. Demirhan, A.L., et al.: Experimental and numerical evaluation of inelastic lateral-torsional buckling of I-section cantilevers. J. Construct. Steel Res. (2020). https://doi.org/10.1016/j.jcsr.2020.10599110.1016/j.jcsr.2020.105991 ↗
20. Rossi, A., et al.: Reassesment of lateral torsional buckling in hot-holled I-beams. Structures 26, 524–536 (2020). https://doi.org/10.1016/j.istruc.2020.04.04110.1016/j.istruc.2020.04.041 ↗
21. Gao, F., et al.: Lateral-torsional buckling behaviour of concrete-filled high-strength steel tubular flange beams under mid-span load. J. Constructional Steel Res. (2021). https://doi.org/10.1016/j.jcsr.2020.10639810.1016/j.jcsr.2020.106398 ↗
22. Rossi, A., et al.: The influence of structural imperfections on the LTB strength of I-beams. Structures 29, 1173–1186 (2021). https://doi.org/10.1016/j.istruc.2020.11.02010.1016/j.istruc.2020.11.020 ↗
23. Mehdi, A.I., Kim, M.: LTB analysis of pre-stressed mono-symmetric thin-walled beams with deviators under non-uniform bending moments using a simplified FEM. Structures 47, 2331–2346 (2023). https://doi.org/10.1016/j.istruc.2022.12.01210.1016/j.istruc.2022.12.012 ↗
24. Wen, Y., Li, B.: Rigid body qualified curved beam approach for lateral torsional buckling of arches. Mech. Based Deign Struct. Mach. 52(9), 6889–6910 (2024). https://doi.org/10.1080/15397734.2023.229435910.1080/15397734.2023.2294359 ↗
25. Huang, X., et al.: The lateral torsional buckling behavior of laminated glass beams. Int. J. Struct. Stability Dynamics (2020). https://doi.org/10.1142/S021945542050080710.1142/S0219455420500807 ↗
26. Soltani, M., Asgarian, B.: Exact Stiffness Matrices for Lateral-Torsional Buckling of Doubly Symmetric Tapered Beams with Axially Varying Material Properties. Iranian J. Sci. Technol.- Transa. Civil Eng. 45(2), 589–609 (2021). https://doi.org/10.1007/s40996-020-00402-z10.1007/s40996-020-00402-z ↗
27. Pham, P.V., et al.: A Shear Deformable Finite Element Formulation for the Elastic Lateral Torsional Buckling Analyses of Steel Beams. Iranian J. Sci. Technol.- Transa. Civil Eng. (2024). https://doi.org/10.1007/s40996-024-01536-010.1007/s40996-024-01536-0 ↗
28. Soltani, M., Asgarian, B.: Lateral-torsional stability analysis of a simply supported axially functionally graded beam with a tapered I-section. Mech. Compos. Mater. 56, 39–54 (2020)10.1007/s11029-020-09859-5 ↗
29. GiŻejowski, M.A., Barszcz, A.M., Stachura, Z.: Elastic flexural-torsional buckling of steel I-section members unrestrained between end supports. Archives Civil Eng. 67(1), 635–656 (2021). https://doi.org/10.24425/ace.2021.13649410.24425/ace.2021.136494 ↗
30. Agüero, A., Baláž, I., Koleková, Y.: New method for metal beams sensitive to lateral torsional buckling with an equivalent geometrical UGLI imperfection. Structures 29, 1445–1462 (2021). https://doi.org/10.1016/j.istruc.2020.11.04710.1016/j.istruc.2020.11.047 ↗
31. Soltani, M., et al.: Nonlocal elasticity theory for lateral stability analysis of tapered thin-walled nanobeams with axially varying materials. Thin-Walled Structu. (2021). https://doi.org/10.1016/j.tws.2020.10726810.1016/j.tws.2020.107268 ↗
32. Anbarasu, M., Kasiviswanathan, M.: A Simplified Design Method for Lateral-Torsional Buckling of GFRP Pultruded I-Beams. Arabian J. Sci. Eng. 46(5), 5047–5060 (2021). https://doi.org/10.1007/s13369-020-05208-910.1007/s13369-020-05208-9 ↗
33. Soltani, M., Atoufi, F.: Non-local finite element formulation for stability analysis of thin-walled nanobeams with varying I-section. Acta Mechanica 233(2), 789–811 (2022). https://doi.org/10.1007/s00707-021-03126-x10.1007/s00707-021-03126-x ↗
34. Soltani, M.: A Novel approach for lateral buckling assessment of double tapered thin-walled laminated composite I-beams. Mech. Adv. Composite Struct. 9(1), 11–23 (2022)
35. Rezaiee-Pajand, M., Masoodi, A.R., Alepaighambar, A.: Lateral-Torsional Buckling of a Bidirectional Exponentially Graded Thin-Walled C-Shaped Beam. Mech. Composite Mater. 58(1), 53–68 (2022). https://doi.org/10.1007/s11029-022-10011-810.1007/s11029-022-10011-8 ↗
36. Mariappan, S., et al.: Lateral-Torsional Buckling of Non-Prismatic I-beams with and without Girders: Linear Analytical and Elastic FEM Approaches. Medziagotyra 29(3), 397–402 (2023). https://doi.org/10.5755/j02.ms.3315110.5755/j02.ms.33151 ↗
37. Nguyen, X.T., et al.: Elastic Critical Lateral Buckling of Beams Subjected to Simultaneous Negative End Moments and Transverse Loads. Appl. Sci. (Switzerland) (2023). https://doi.org/10.3390/app1302077810.3390/app13020778 ↗
38. Nguyen, T.T., et al.: Influence of combined imperfections on lateral-torsional buckling behaviour of pultruded FRP beams. Composite Struct. (2023). https://doi.org/10.1016/j.compstruct.2022.11638510.1016/j.compstruct.2022.116385 ↗
39. da Silva, L.V., Mesquita, L.M.R.: Elastic lateral-torsional buckling of cellular beams. Structures (2024). https://doi.org/10.1016/j.istruc.2024.10639210.1016/j.istruc.2024.106392 ↗
40. Wurf, A., Rabinovitch, O., Frostig, Y.: Lateral instability of sandwich beams under uniform bending. J. Sandwich Struct. Mater. 26(5), 753–776 (2024). https://doi.org/10.1177/1099636224123361210.1177/10996362241233612 ↗
41. Saoula, A., et al.: Nonlinear Model for LTB Prediction of RHS Beams Under Combined Axial and Bending Loads With Distortional Deformation Allowed. Struct.Design Tall Special Build. 33, 18 (2024). https://doi.org/10.1002/tal.218810.1002/tal.2188 ↗
42. Basaran, B., Aksoylu, C., Kalkan, I.: Influence of overhang length on LTB behavior of compact doubly-symmetric steel I-beams. Eur. J. Environ. Civil Eng. (2025). https://doi.org/10.1080/19648189.2024.243987610.1080/19648189.2024.2439876 ↗
43. Wu, M., et al.: Dynamic instability and free vibration analysis of thin-walled structures with arbitrary cross-sections. Eur. Phys. J. Plus 137, 408 (2022). https://doi.org/10.1140/epjp/s13360-022-02600-210.1140/epjp/s13360-022-02600-2 ↗
44. Meng-Jing, W., et al.: Design and thermo-mechanical analysis of sandwich structures with negative thermal expansion. Int. J. Mech. Mater. Des. 18, 807–822 (2022). https://doi.org/10.1007/s10999-022-09609-610.1007/s10999-022-09609-6 ↗
45. Erkmen, R.E., Niki, V., Afnani, A.: Shear-deformable hybrid finite-element formulation for lateral-torsional buckling analysis of composite thin-walled members. Canadian J. Civil Eng. 48(8), 1026–1036 (2021). https://doi.org/10.1139/cjce-2019-056010.1139/cjce-2019-0560 ↗
46. Liu, L., et al.: Lateral-Torsional Buckling of Shear Deformable Monosymmetric Steel I-Section Arches with Elastic Rotational-End Restraints under a Central Concentrated Load. J. Struct. Eng. (USA) (2021). https://doi.org/10.1061/(ASCE)ST.1943-541X.000287710.1061/(ASCE)ST.1943-541X.0002877 ↗
47. Liang, C., et al.: Effects of Shear on the Elastic Lateral Torsional Buckling of Doubly Symmetric I-Beams. J. Struct. Eng. (USA) (2022). https://doi.org/10.1061/(ASCE)ST.1943-541X.000329410.1061/(ASCE)ST.1943-541X.0003294 ↗
48. Guendouz, I., et al.: Buckling analysis of thin-walled laminated composite or functionally graded sandwich I-beams using a refined beam theory. Mech. Based Design Struct. Mach. 53(1), 180–200 (2025). https://doi.org/10.1080/15397734.2024.236349710.1080/15397734.2024.2363497 ↗
49. Wu, M., Azim, I., Huang, X.H.: A novel technique for low-velocity impact of shallow arches. Comput. Struct. (2024). https://doi.org/10.1016/j.compstruc.2024.10738610.1016/j.compstruc.2024.107386 ↗
50. Mengjing, W., et al.: Auxetic effects in the large deflection bending characteristics of FG GRMMC shallow arches. Appl. Math. Model. 119, 534–548 (2023). https://doi.org/10.1016/j.apm.2023.02.03410.1016/j.apm.2023.02.034 ↗
51. Nebab, M., et al.: Warping and porosity effects on the mechanical response of FG-Beams on non-homogeneous foundations via a Quasi-3D HSDT. Struct. Eng. Mech. 90(1), 83–94 (2024). https://doi.org/10.12989/sem.2024.90.1.08310.12989/sem.2024.90.1.083 ↗
52. Djebbour, K., et al.: An enhanced quasi-3D HSDT for free vibration analysis of porous FG-CNT beams on a new concept of orthotropic VE-foundations. Mech. Adv. Mater. Struct. 32(5), 893–909 (2025). https://doi.org/10.1080/15376494.2024.235672810.1080/15376494.2024.2356728 ↗
53. Nebab, M., et al.: Fundamental frequencies of cracked FGM beams with influence of porosity and Winkler/Pasternak/Kerr foundation support using a new quasi-3D HSDT. Mech. Adv. Mater. Struct. 31(28), 10639–10651 (2024). https://doi.org/10.1080/15376494.2023.229437110.1080/15376494.2023.2294371 ↗
54. Hadji, L., et al.: Multi-Directional Functionally Graded Sandwich Plates: Buckling and Free Vibration Analysis with Refined Plate Models under Various Boundary Conditions. Computation 12(4), 65 (2024). https://doi.org/10.3390/computation1204006510.3390/computation12040065 ↗
55. Zouatnia, N., et al.: Analysis of free vibration in bi-directional power law-based FG beams employing RSD theory. Coupled Syst. Mech. 13(4), 359–375 (2024). https://doi.org/10.12989/csm.2024.13.4.35910.12989/csm.2024.13.4.359 ↗
56. Yaghoobi, M., et al.: Free vibration analysis of pores functionally graded plates using new element based on Hellinger-Reissner functional. Steel Composite Struct. 49(6), 713–728 (2023). https://doi.org/10.12989/scs.2023.49.6.71310.12989/scs.2023.49.6.713 ↗
57. Liu, L., et al.: Lateral-torsional buckling of functionally graded porous arches with graphene platelets reinforcements under an arbitrary radial concentrated load. Composite Structures 281, 114973 (2022)10.1016/j.compstruct.2021.114973 ↗
58. Saoula, A., et al.: Instability of Porous FGM Rectangular Hollow Section (RHS) Beam Element in a Thermal Environment. Int. J. Structural Stability Dynamics (2024). https://doi.org/10.1142/S021945542650065310.1142/S0219455426500653 ↗
59. Turan, F., Basoglu, M.F., Hoang, V.N.V.: Lateral torsional stability of porous thin-walled I-beams with nonuniform porosity distributions subjected to a uniformly distributed load. In Acta Mechanica 236, 153–171 (2025)10.1007/s00707-024-04110-x ↗
60. Turan, F.: Critical lateral-torsional buckling loads of porous orthotropic rectangular beams containing warping effects. In ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik (2024). https://doi.org/10.1002/zamm.20240047810.1002/zamm.202400478 ↗
61. Chu, F., et al.: Buckling analysis of functionally graded thin plate with in-plane material inhomogeneity. Eng. Anal. Boundary Elem. 65, 112–125 (2016). https://doi.org/10.1016/j.enganabound.2016.01.00710.1016/j.enganabound.2016.01.007 ↗
62. Gawande, G.S., Gupta, L.M.: Experimental and Analytical Investigation of Open Web Steel Beam Under Non-uniform Bending. Int. J. Steel Struct. 24(3), 417–430 (2024). https://doi.org/10.1007/s13296-024-00825-810.1007/s13296-024-00825-8 ↗
63. Yücesoy, A., Coşkun, S.B.: Lateral-Torsional Stability of Rectangular Prismatic Beams Using Some Analytical Approximation Techniques. Int. J. Struct. Stability Dynamics (2020). https://doi.org/10.1142/S021945542050027310.1142/S0219455420500273 ↗
64. Ghezal, M.I.E., Maalej, Y., Doghri, I.: Micromechanical models for porous and cellular materials in linear elasticity and viscoelasticity. Comput. Mater. Sci. 70, 51–70 (2013). https://doi.org/10.1016/j.commatsci.2012.12.02110.1016/j.commatsci.2012.12.021 ↗
65. Turan, F., Karadeniz, M., Zeren, E.: Free vibration and buckling behavior of porous orthotropic doubly-curved shallow shells subjected to non-uniform edge compression using higher-order shear deformation theory. In Thin-Walled Structures 205, 112522 (2024)10.1016/j.tws.2024.112522 ↗
66. Bahadır, F.C., Turan, F.: On the vibration responses of orthotropic laminated cylindrical panels with non-uniform porosity distributions using higher-order shear deformation theory. Mech. Based Design Struct. Mach. 52(12), 9975–10005 (2024). https://doi.org/10.1080/15397734.2024.235258510.1080/15397734.2024.2352585 ↗
67. Soltani, M., Soltani, A., Civalek, O.: Interaction of the lateral buckling strength with the axial load for FG micro-sized I-section beam-columns. In Thin-Walled Structures 179, 109616 (2022)10.1016/j.tws.2022.109616 ↗
68. Mohri, F., Azrar, L., Potier-Ferry, M.: Lateral post-buckling analysis of thin-walled open section beams. In Thin-Walled Structures 40(12), 1013–1036 (2002)10.1016/S0263-8231(02)00043-5 ↗
69. Sapountzakis, E.J., Dourakopoulos, J.A.: Lateral buckling analysis of beams of arbitrary cross section by BEM. Comput. Mech. 45, 11–21 (2009)10.1007/s00466-009-0416-1 ↗
70. Benyamina, A.B., Meftah, S.A., Mohri, F., et al.: Analytical solutions attempt for lateral torsional buckling of doubly symmetric web-tapered I-beams. Eng. Struct. 56, 1207–1219 (2013)10.1016/j.engstruct.2013.06.036 ↗
71. Hjaji, M.: Coupled Flexural-Lateral-Torsional of Shear Deformable Thin-Walled Beams with Asymmetric Cross-Section-Closed Form Exact Solution. J. Thermal Eng. 1(7), 659–669 (2015)10.18186/jte.75509 ↗
72. Suresh, J.K., Nagaraj, V.T.: Higher-order shear deformation theory for thin-walled composite beams. J. Aircraft 33(5), 978–986 (1996)10.2514/3.47044 ↗
73. Nguyen, P.D., Duc, N.D.: A semi-analytical sinusoidal shear deformation theory for nonlinear dynamic response and vibration of CNT-FGM doubly curved shallow shells. In Acta Mechanica 235(4), 2077–2112 (2024)10.1007/s00707-023-03824-8 ↗
74. Asgarian, B., Soltani, M., Mohri, F.: Lateral-torsional buckling of tapered thin-walled beams with arbitrary cross-sections. In Thin-walled structures 62, 96–108 (2013)10.1016/j.tws.2012.06.007 ↗
75. Kuś, J.: Lateral-torsional buckling steel beams with simultaneously tapered flanges and web. Steel and Composite Structures 19(4), 897–916 (2015)10.12989/scs.2015.19.4.897 ↗
76. Eurocode-3. Eurocode 3—Design of steel structures. BS EN, 1(1), 2005. (1993)