journal article·2025-07-25Open access

Study on Optimization of Downward Mining Schemes of Sanshandao Gold Mine

Weijun Liu, Zhixiang Liu, Zaiyong Li

Applied Sciences· Volume 15· Issue 15

Abstract

To address the challenges associated with deep ground pressure control at the Sanshandao Gold Mine, a pre-controlled top-to-middle and deep-hole upper and lower-wall goaf subsequent filling mining method was proposed. Three distinct downward mining schemes were designed, the excavation procedure is systematically designed with 18 steps, and the temporal and spatial evolution characteristics of stress and displacement were analyzed using FLAC3D. The results revealed that stress concentration occurred during excavation steps 1–3. As excavation progressed to steps 4–9, the stress concentration area shifted primarily to the filling zones of partially excavated and filled sections. By steps 10–12, the stress concentration in these areas was alleviated. Upon completion of all excavation and filling steps, a small plastic zone was observed, accompanied by an alternating distribution of high and low stress within the backfill. Throughout the excavation process, vertical displacement ranged from 4.42 to 22.73 mm, while horizontal displacement ranged from 1.72 to 3.69 mm, indicating that vertical displacement had a more significant impact on stope stability than horizontal displacement. Furthermore, the fuzzy comprehensive evaluation method was applied to optimize the selection among the three schemes, with Scheme 2 identified as the optimal. Field industrial trials subsequently confirmed the technical rationality and practical applicability of Scheme 2 under actual mining conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geomechanics and Mining Engineering · Geotechnical and Geomechanical Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Resources and Safety Engineering, Central South University, Changsha 410083, China

Guizhou Provincial Bureau of Geology and Mineral Resources Geology 113 Brigade, Liupanshui 553004, China

Funding

Fundamental Research Funds for the Central Universities of Central South University · Liupanshui Innovation Technology Center for Disaster Prevention and Resilience Enhancement in Ecologically Fragile Areas

References (41)

Show source-provided references
1. Undersea safety mining of the large gold deposit in Xinli District of Sanshandao Gold Mine10.1007/s12613-012-0598-y ↗
2. Safe mining technology of undersea metal mine10.1016/S1003-6326(11)61239-9 ↗
3. Determination of isolation layer thickness for undersea mine based on differential cubature solution to irregular Mindlin plate10.1007/s11771-017-3472-2 ↗
4. Investigations of the height of fractured zones in overburden induced by undersea mining10.1007/s12517-019-4799-9 ↗
5. A case study on the height of a water-flow fracture zone above undersea mining: Sanshandao Gold Mine, China10.1007/s12665-019-8121-7 ↗
6. Assessing Rockburst Hazards Using a Self-Developed Real-Time Microseismic Monitoring System in a Deep-Sea Goldmine10.1109/ACCESS.2019.2931155 ↗
7. Fractal evolution mechanism of rock fracture in undersea metal mining10.1007/s11771-020-4369-z ↗
8. Coal pillar failure analysis and instability evaluation methods: A short review and prospect10.1016/j.engfailanal.2022.106344 ↗
9. Sustainable mining method selection by a multi-stakeholder collaborative multi-attribute group decision-making method10.1016/j.resourpol.2024.105043 ↗
10. A Causal Analysis of the Influential Criteria in Underground Mining Method Selection10.1007/s00603-024-03864-z ↗
11. Comparative Analysis on the Safety Characteristics of N00 Mining Method with Conventional 121 Mining Method10.1007/s10706-023-02574-7 ↗
12. Stability Analysis of Secondary Mining of Submarine Mine Under the Clamping Control of Fault and Fracture Zone
13. Li, S., Yu, L.F., Dan, Z.Y., Yin, T.B., and Chen, J.Y. (2024). The Recent Progress China Has Made in Mining Method Transformation, Part I: Shrinkage Method Transformed into Backfilling Method. Appl. Sci., 14.10.3390/app142110033 ↗
14. Construction of reasonable pillar group for undersea mining in metal mine10.1016/S1003-6326(18)64708-9 ↗
15. A New Mining Scheme for Hanging-Wall Ore-Body during the Transition from Open Pit to Underground Mining: A Numerical Study10.1155/2018/1465672 ↗
16. Numerical Investigation on Safe Mining of Residual Pillar in Goaf: A Case Study of Panlong Lead-Zinc Mine10.1007/s10706-020-01294-6 ↗
17. Zhou, Z., Zhou, J.L., Lai, L., Xu, M.T., and Xu, Y.L. (2024). Determination of optimal mining width for coal mining under the slope by of using numerical simulation. Sci. Rep., 14.10.1038/s41598-024-51624-4 ↗
18. Zhao, K., Liang, N., Zeng, P., Wang, W., Gong, C., Xiong, L., and Liu, H. (2023). Research on Optimization and Numerical Simulation of Layout Scheme of Mining Approach in Downward Slicing and Filling Method. Appl. Sci., 13.10.20944/preprints202306.0236.v1 ↗
19. Simulate on Support Technology of Deep Mining10.1007/s10706-021-01746-7 ↗
20. Optimization of mining method in subsea deep gold mines: A case study10.1016/S1003-6326(19)65122-8 ↗
21. Application of the FUZZY TOPSIS method for selecting an underground mining method10.46544/AMS.v28i2.16 ↗
22. The application of the analytic hierarchy process (AHP) and Yager’s method in underground mining method selection problem10.1080/17480930.2014.895218 ↗
23. Bajić, S., Bajić, D., Gluščević, B., and Ristić Vakanjac, V. (2020). Application of Fuzzy Analytic Hierarchy Process to Underground Mining Method Selection. Symmetry, 12.10.3390/sym12020192 ↗
24. Hu, B.Y., Zhang, Q.L., Li, S., Yu, H.X., Wang, X.M., and Wang, H. (2022). Application of Numerical Simulation Methods in Solving Complex Mining Engineering Problems in Dingxi Mine, China. Minerals, 12.10.3390/min12020123 ↗
25. Hou, D., Xu, M., Li, X., Wang, J., Wang, M., and Li, S. (2023). Optimization of mining methods for deep orebody of large phosphate mines. Front. Built Environ., 9.10.3389/fbuil.2023.1282684 ↗
26. Underground mining method selection by decision making tools10.1016/j.tust.2008.07.003 ↗
27. Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique10.1016/j.oceaneng.2004.05.001 ↗
28. Mining method selection by AHP approach
29. A Matlab toolbox for grey clustering and fuzzy comprehensive evaluation10.1016/j.advengsoft.2006.12.002 ↗
30. Failure behavior of jointed rock masses containing a circular hole under compressive-shear load: Insights from DIC technique10.1016/j.tafmec.2025.105089 ↗
31. A comparative performance study on the development of hybrid extreme gradient boosting models for predicting rock layer subsidence in subsea gold mine10.1007/s40948-024-00912-4 ↗
32. Comparative prediction performance of the strength of a new type of Ti tailings cemented backfilling body using PSO-RF, SSA-RF, and WOA-RF models
33. Application of Fuzzy Comprehensive Evaluation in Selecting Large Sports Venues
34. Fuzzy comprehensive evaluation model of interuniversity collaborative learning based on network10.1515/phys-2017-0047 ↗
35. Comprehensive Evaluation and Decision for Goaf Based on Fuzzy Theory in Underground Metal Mine10.1155/2022/3104961 ↗
36. Underground Mining Method Selection With the Hesitant Fuzzy Linguistic Gained and Lost Dominance Score Method10.1109/ACCESS.2018.2878784 ↗
37. Fuzzy Comprehensive Evaluation Method of Masonry Structure Safety Based on Grey Clustering Theory10.1155/2018/8710192 ↗
38. Fuzzy comprehensive evaluation of physical education based on high dimensional data mining
39. The ANP-Fuzzy-TOPSIS model for the optimization of the scheme of large-section blasting10.1007/s12517-019-5005-9 ↗
40. Selection mining methods via multiple criteria decision analysis using TOPSIS and modification of the UBC method10.46873/2300-3960.1054 ↗
41. Research and application of AHP-fuzzy comprehensive evaluation model10.1007/s12065-020-00415-7 ↗