The effect of negative Poisson’s ratio on the low-velocity impact response of an auxetic nanocomposite laminate beam
Source abstract
Abstract
In this paper, an investigation on the low-velocity impact (LVI) response of a shear deformable beam laminated by carbon nanotube reinforced composite (CNTRC) layers is performed. The composite beam is “auxetic” due to the negative out-of-plane Poisson’s ratio (NPR) through special symmetric stacking sequences of layers that are designed based on the Classical Laminate Theory. To study the effect of the out-of-plane NPR on the LVI response of the composite beam, a newly defined Hertz model is developed. The motion equations of Karman type for the CNTRC laminate beam are derived in the framework of the Reddy beam theory and solved by means of a two-step perturbation approach while the dynamic equation of the impactor is built on Newton’s Law. Since temperature-dependent material properties of both carbon nanotube (CNT) and matrix are employed, the thermal influence on the LVI behavior is also investigated. Moreover, a piece-wise method is employed herein to investigate the effect of functionally graded (FG) patterns of the CNT reinforcements on the impact response. Numerical results elucidating the effects of temperature, FG distribution, and CNT volume fraction on the out-of-plane Poisson’s ratio and impact response of the beam are obtained by using a Range–Kutta method and discussed in details.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Mechanical Behavior of Composites · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Abrate, S.: Impact Engineering of Composite Structures. Springer, Berlin (2011)10.1007/978-3-7091-0523-8 ↗
2. Bayat, M.R., Rahmani, O., Mashhadi, M.M.: Nonlinear low-velocity impact analysis of functionally graded nanotube-reinforced composite cylindrical shells in thermal environments. Polym. Compos. 39, 730–745 (2018)10.1002/pc.23990 ↗
3. Chen, Y.J., Scarpa, F., Farrow, I.R., Liu, Y.J., Leng, J.S.: Composite flexible skin with large negative Poisson’s ratio range: numerical and experimental analysis. Smart Mater. Struct. 22, 045005 (2013)10.1088/0964-1726/22/4/045005 ↗
4. Clarke, J.F., Duckett, R.A., Hine, P.J., Hutchinson, I.J., Ward, I.M.: Negative Poisson’s ratios in angle-ply laminates: theory and experiment. Composites 25, 863–868 (1994)10.1016/0010-4361(94)90027-2 ↗
5. Dai, H.-L., Yan, X., Jiang, H.-J.: Investigation on thermomechanical behavior of a HSLA steel circular plate under impact load. Int. J. Mech. Mater. Des. 10, 411–420 (2014)10.1007/s10999-014-9251-4 ↗
6. Ebrahimi, F., Habibi, S.: Low-velocity impact response of laminated FG-CNT reinforced composite plates in thermal environment. Adv. Nano Res. 5, 69–97 (2017)10.12989/anr.2017.5.1.035 ↗
7. Evans, K.E., Nkansah, M.A., Hutchinson, I.J., Rogers, S.C.: Molecular network design. Nature 353, 124 (1991)10.1038/353124a0 ↗
8. Fan, Y., Wang, H.: The effects of matrix cracks on the nonlinear bending and thermal postbuckling of shear deformable laminated beams containing carbon nanotube reinforced composite layers and piezoelectric fiber reinforced composite layers. Compos. B 106, 28–41 (2016)10.1016/j.compositesb.2016.09.005 ↗
9. Fan, Y., Wang, H.: Nonlinear low-velocity impact analysis of matrix cracked hybrid laminated plates containing CNTRC layers resting on visco-Pasternak foundation. Compos. Part B 117, 9–19 (2017a)10.1016/j.compositesb.2017.02.010 ↗
10. Fan, Y., Wang, H.: Nonlinear low-velocity impact on damped and matrix-cracked hybrid laminated beams containing carbon nanotube reinforced composite layers. Nonlinear Dyn. 89, 1863–1876 (2017b)10.1007/s11071-017-3557-3 ↗
11. Fan, Y., Xiang, Y., Shen, H.-S., Wang, H.: Low-velocity impact response of FG-GRC laminated beams resting on visco-elastic foundations. Int. J. Mech. Sci. 141, 117–126 (2018a)10.1016/j.ijmecsci.2018.04.007 ↗
12. Fan, Y., Xiang, Y., Shen, H.-S., Hui, D.: Nonlinear low-velocity impact response of FG-GRC laminated plates resting on visco-elastic foundations. Compos. B 144, 184–194 (2018b)10.1016/j.compositesb.2018.02.016 ↗
13. Fan, Y., Xiang, Y., Shen, H.-S.: Temperature-dependent mechanical properties of graphene/Cu nanocomposites with in-plane negative Poisson’s ratios. Research 2020, 5618021 (2020)
14. González, E.V., Maimí, P., Camanho, P.P., Turon, A., Mayugo, J.A.: Simulation of drop-weight impact and compression after impact tests on composite laminates. Compos. Struct. 94(11), 3364–3378 (2012)10.1016/j.compstruct.2012.05.015 ↗
15. Greszczuk, L.B.: Damage in composite materials due to low velocity impact. In: Zukas, J.A., et al. (eds.) Impact Dynamics. Wiley, New York (1982)
16. Han, Y., Elliott, J.: Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites. Comput. Mater. Sci. 39, 315–323 (2007)10.1016/j.commatsci.2006.06.011 ↗
17. Harkati, E.H., Bezazi, A., Scarpa, F., Alderson, K., Alderson, A.: Modelling the influence of the orientation and fibre reinforcement on the negative Poisson’s ratio in composite laminates. Phys. Stat. Sol. 244, 883–892 (2007)10.1002/pssb.200572707 ↗
18. Heydari-Meybodi, M., Saber-Samandari, S., Sadighi, M.: An experimental study on low-velocity impact response of nanocomposite beams reinforced with nanoclay. Compos. Sci. Technol. 133, 70–78 (2016)10.1016/j.compscitech.2016.07.020 ↗
19. Heyliger, P.R., Reddy, J.N.: A higher-order beam finite element for bending and vibration problems. J. Sound Vib. 126, 309–326 (1988)10.1016/0022-460X(88)90244-1 ↗
20. Hill C.B., Wang Y., Zhupanska O.I.: Effects of carbon nanotube buckypaper layers on the electrical and impact response of IM7/977-3 composite laminates. American Society for Composites 27th Annual Technical Conference, Arlington, TX. (2012)
21. Hill C.B., Wang Y., Zhupanska O.I.: Impact response of CFRP laminates with CNT buckypaper layers. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA (2013). https://doi.org/10.2514/6.2013-161710.2514/6.2013-1617 ↗
22. Hou, X., Hu, H., Silberschmidt, V.: A novel concept to develop composite structures with isotropic negative Poisson’s ratio: effects of random. Compos. Sci. Technol. 72(15), 1848–1854 (2012)10.1016/j.compscitech.2012.07.020 ↗
23. Jam, J.E., Kiani, Y.: Low velocity impact response of functionally graded carbon nanotube reinforced composite beams in thermal environment. Compos. Struct. 132, 35–43 (2015)10.1016/j.compstruct.2015.04.045 ↗
24. Kwon, H., Bradbury, R.C., Leparoux, M.: Fabrication of functionally graded carbon nanotube-reinforced aluminum matrix composite. Adv. Eng. Mater. 13, 325–329 (2011)10.1002/adem.201000251 ↗
25. Malekzadeh, P., Dehbozorgi, M.: Low velocity impact analysis of functionally graded carbon nanotubes reinforced composite skew plates. Compos. Struct. 140, 728–748 (2016)10.1016/j.compstruct.2016.01.045 ↗
26. Mir, M., Ali, M.N., Sami, J., Ansari, U.: Review of mechanics and applications of auxetic structures. Adv. Mater. Sci. Eng. 2014, 753496 (2014)10.1155/2014/753496 ↗
27. Mittal, R.K., Khalili, M.R.: Analysis of impact of a moving body on an orthotropic elastic plate. AIAA J. 32, 850–856 (1994)10.2514/3.12063 ↗
28. Olsson, R., Donadon, V.M., Falzon, G.B.: Delamination threshold load for dynamic impact on plates. Int. J. Solids Struct. 43, 31241–33141 (2006)10.1016/j.ijsolstr.2005.05.005 ↗
29. Pham, D.C., Lua, J., Sun, H., Zhang, D.: A three-dimensional progressive damage model for drop-weight impact and compression after impact. J. Compos. Mater. 54(4), 449–462 (2020)10.1177/0021998319859050 ↗
30. Rilo, N.F., Ferreira, L.M.S.: Experimental study of low-velocity impacts on glass-epoxy laminated plates. Int. J. Mech. Mater. Des. 4, 291–300 (2008)10.1007/s10999-008-9071-5 ↗
31. Salami, S.J.: Low velocity impact response of sandwich beams with soft cores and carbon nanotube reinforced face sheets based on Extended High Order Sandwich Panel Theory. Aerosp. Sci. Technol. 66, 165–176 (2017)10.1016/j.ast.2017.03.007 ↗
32. Shen, H.-S.: Nonlinear bending of functionally graded carbon nanotube reinforced composite plates in thermal environments. Compos. Struct. 91, 9–19 (2009)10.1016/j.compstruct.2009.04.026 ↗
33. Shen, H.-S., Zhang, C.-L.: Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates. Mater. Des. 31, 3403–3411 (2010)10.1016/j.matdes.2010.01.048 ↗
34. Shen, H.-S., Li, C., Reddy, J.N.: Large amplitude vibration of FG-CNTRC laminated cylindrical shells with negative Poisson’s ratio. Comput. Methods Appl. Mech. Eng. 36, 112727 (2020a)10.1016/j.cma.2019.112727 ↗
35. Shen, H.-S., Huang, X.-H., Yang, J.: Nonlinear bending of temperature-dependent FG-CNTRC laminated plates with negative Poisson’s ratio. Mech. Adv. Mater. Struct. (2020b). https://doi.org/10.1080/15376494.2020.171641210.1080/15376494.2020.1716412 ↗
36. Song, Z.G., He, X., Liew, K.M.: Dynamic responses of aerothermoelastic functionally graded CNT reinforced composite panels in supersonic airflow subjected to low-velocity impact. Compos. B 149, 99–109 (2018)10.1016/j.compositesb.2018.05.026 ↗
37. Sun, C.T., Chen, J.K.: On the impact of initially stressed composite laminates. J. Compos. Mater. 19, 490 (1985)10.1177/002199838501900601 ↗
38. Sveklo, V.A.: Hertz problem of compression of anisotropic bodies. J. Appl. Math. Mech. 38, 1023–1027 (1974)10.1016/0021-8928(75)90099-4 ↗
39. Swanson, S.R.: Contact deformation and stress in orthotropic plates. Compos. A 36, 1421–1429 (2005)10.1016/j.compositesa.2004.11.011 ↗
40. Tan, K.T., Watanabe, N., Iwahori, Y.: Impact damage resistance, response, and mechanisms of laminated composites reinforced by through-thickness stitching. Int. J. Damage Mech. 21(1), 51–80 (2012)10.1177/1056789510397070 ↗
41. Takakura, A., Beppu, K., Nishihara, T., Fukui, A., Kozeki, T., Namazu, T.: Strength of carbon nanotubes depends on their chemical structures. Nat. Commun. 10, 3040 (2019)10.1038/s41467-019-10959-7 ↗
42. Turner, J.R.: Contact on a transversely isotropic half-space, or between two transversely isotropic bodie. Int. J. Solids Struct. 16, 409–419 (1979)10.1016/0020-7683(80)90039-6 ↗
43. Wang, Z.-X., Xu, J., Qiao, P.: Nonlinear low-velocity impact analysis of temperature-dependent nanotube-reinforced composite plates. Compos. Struct. 108, 423–434 (2014)10.1016/j.compstruct.2013.09.024 ↗
44. Yang, J., Huang, X.-H., Shen, H.-S.: Nonlinear flexural behavior of temperature-dependent FG-CNTRC laminated beams with negative Poisson’s ratio resting on the Pasternak foundation. Eng. Struct. 207, 110250 (2020a)10.1016/j.engstruct.2020.110250 ↗
45. Yang, J., Huang, X.-H., Shen, H.-S.: Nonlinear vibration of temperature-dependent FG-CNTRC laminated plates with negative Poisson’s ratio. Thin Walled Struct. 148, 106514 (2020b)10.1016/j.tws.2019.106514 ↗
46. Zarei, H., Fallah, M., Bisadi, H., Daneshmehr, A., Minak, G.: Multiple impact response of temperature-dependent carbon nanotube-reinforced composite (CNTRC) plates with general boundary conditions. Compos. B 113, 206–217 (2017)10.1016/j.compositesb.2017.01.021 ↗