journal article·2025-06-25Open access

Research on the Bearing Characteristics of Narrow Coal Pillars in Double-Roadway Excavation Under the Influence of Full Dynamic Pressure

Wei Gu, Hao Zhang, Zhenfei Han, Haokun Tang, Jingyong Pei, Shixin Wu, Dalong Xu

Applied Sciences· Volume 15· Issue 13

Abstract

A narrow coal pillar in double-roadway excavation can solve the problem of working face connection and improve the resource recovery rate, but narrow coal pillars are affected by the full mining stress. Taking the 2109 double-roadway excavation of Qingwa Coal Mine as the engineering background, the roof mechanical structure model of a narrow coal pillar in a double-roadway excavation layout was established, and the bearing characteristics of different coal pillar widths under the influence of full dynamic pressure were studied. The narrow coal pillar retention width was obtained and tested through field industrial experiments. The main research results were as follows: (1) The relationship between the coal pillar bearing load and the immediate roof length was deduced, and the bearing stress of the coal pillar was divided into the steep decline stage, the transition stage, and the stabilization stage. The coal pillar within the width of the stabilization stage has a certain strength surplus capacity. (2) Under the influence of full dynamic pressure, the 5~7 m coal pillar yielded to failure, and the coal pillar of 8 m and above had a certain residual bearing capacity, compared with the first mining. After the second mining, the elastic zone in the coal pillar of each width was significantly reduced; there was no elastic grid in the coal pillar of 5 m and 6 m in width, and the grid area and proportion of the elastic zone of the coal pillars with widths of 7 m and above were very low. The optimal retention width of the narrow coal pillar was determined to be 8 m. (3) Under the influence of repeated mining, the impact of first mining on the roadway displacement of the roof and floor plate was greater, followed by the solid coal side, which had less impact on the coal pillar side. The secondary mining had a greater impact on the floor, followed by the coal pillar side and the solid coal side, which had little impact on the roadway roof. This paper also provides a significant reference for the retention of narrow coal pillars in double-roadway excavation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Geomechanics and Mining Engineering · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou 221116, China

Funding

National Natural Science Foundation of China

References (40)

Show source-provided references
1. Effectiveness of secure supply and carbon reduction in the coal sector for strengthening the energy power of China10.15302/J-SSCAE-2024.04.001 ↗
2. Thoughts about the main energy status of coal and green mining in China
3. Low carbon modern coal-based energy technology system and development strategy
4. Strategic conception of carbon neutralization in coal industry10.15302/J-SSCAE-2023.05.009 ↗
5. Study on spatiotemporal effect and control technology of roadway driving face to mining
6. Research on dissimilation characteristics and control method of failure of surrounding rock in the roadway with repeated mining of steep and ultra-close multiple coal seam
7. Design of Stable Parallelepiped Coal Pillars Considering Geotechnical Uncertainties10.1007/s00603-023-03415-y ↗
8. Lateral abutment pressure distribution and evolution in wide pillars under the first mining effect10.1016/j.ijmst.2022.11.006 ↗
9. Research on stress release for the gob-side roadway using the roof-cutting technology with a chainsaw arm10.1098/rsos.191663 ↗
10. Numerical-modeling-based assessment of the impact of two-end-type cable support on failure characteristics of yield pillars10.1016/j.engfailanal.2021.105619 ↗
11. Study on the new layout pattern about the gob-side entry under dynamic pressure and its surrounding rock stability control10.1002/ese3.1667 ↗
12. Reasonable width of coal pillar between roadways during double lane driving with large mining height
13. Huang, W., Liu, S., Gao, M., Hou, T., Wang, X., Zhao, T., Sui, L., and Xie, Z. (2023). Improvement of Reinforcement Performance and Engineering Application of Small Coal Pillars Arranged in Double Roadways. Sustainability, 15.10.3390/su15010292 ↗
14. Stress Distribution and Optimum Spacing Determination of Double-Withdrawal-Channel Surrounding Rocks: A Case Study of Chinese Coal Mine10.1155/2021/9973634 ↗
15. Stability and control of surrounding rock in double lane tunneling with deep high stress
16. Li, C., Xin, D., Liu, Y., and Chen, T. (2023). A Case Study on Strong Strata Behaviors Mechanism of Mining Reserved Roadway and Its Prevention Techniques. Processes, 11.10.3390/pr11051341 ↗
17. Qian, D., Jiao, H., Deng, J., Yang, J., Jiao, M., Xian, G., Yu, C., Zhu, Y., Liu, J., and Huang, S. (2023). Instability Mechanism, Pressure Relief, and Long Anchorage Control Countermeasures for Surrounding Rock of Strong Mining Roadway at Large Mining Height Working Face. Minerals, 13.10.3390/min13030391 ↗
18. Liu, S., Bai, J., Wang, X., Wang, G., Wu, B., Li, Y., and Zhao, J. (2021). Study on the Stability of Coal Pillars Under the Disturbance of Repeated Mining in a Double-Roadway Layout System. Front. Earth Sci., 9.10.3389/feart.2021.754747 ↗
19. Mechanism of pressure relief for double roadway arrangement in thick coal seam
20. Temporal-spatial evolutionary law of plastic zone and stability control in repetitive mining roadway
21. Regulation principle and stability control of plastic zone in repeated mining roadway
22. Scale-span evolution law mechanical mechanism of surrounding rock cracks in repeated mining roadway
23. Morphological characteristics and quantitative discriminant method of superimposed plastic zone expansion of surrounding rock of repeated mining roadway
24. Study on failure mechanism and control of surrounding rock of secondary mining roadway in thick and hard roof coal seam
25. Research on the influencing factors and evolution law of structural stability of surrounding rock of mining roadway
26. Skrzypkowski, K. (2020). Comparative Analysis of the Mining Cribs Models Filled with Gangue. Energies, 13.10.3390/en13205290 ↗
27. Tahmasebinia, F., Yang, A., Feghali, P., and Skrzypkowski, K. (2023). Structural Evaluation of Cable Bolts under Static Loading. Appl. Sci., 13.10.3390/app13031326 ↗
28. Research on the failure mechanism and control technology of surrounding rock in gob-side entry driving under unstable overlying strata10.1016/j.engfailanal.2022.106361 ↗
29. Longwall mining “cutting cantilever beam theory” and 110 mining method in China—The third mining science innovation10.1016/j.jrmge.2015.07.002 ↗
30. Y-shaped ventilation air leakage law of working face of gob-side entry retaining by cutting roof to release pressure
31. A study of the mechanical structure of the direct roof during the whole process of non-pillar gob-side entry retaining by roof cutting10.1177/0144598720947470 ↗
32. Guo, Y., Lu, C., He, Z., and Song, J. (2022). Numerical and Field Investigations of Tremors Induced by Thick-Hard Strata Fracture. Appl. Sci., 12.10.3390/app122111151 ↗
33. Stability control of overburden and coal pillars in the gob-side entry under dynamic pressure10.1016/j.ijrmms.2023.105490 ↗
34. Numerical simulation method for stope underground pressure in whole process of longwall mining
35. Study on Multi-scale strength and Control of Coal Pillar in Gob Side Entry of Fully Mechanized Top Coal Caving Face in “Double Hard’ Seam
36. Evaluation of potentiality of coal bump hazard in underground coal mines through numerical modelling and binary logistic regression approach with field validation10.1007/s10064-025-04289-w ↗
37. Determining the abutment angle in longwall coal mining using NLMR, GEP and GEO techniques10.1007/s12145-025-01872-3 ↗
38. Salamon, M.D.G. (2020). Mechanism of caving in longwall coal mining. Rock Mechanics Contributions and Challenges, Proceedings of the 31st U.S. Symposium, Golden, CO, USA, 18–20 June 1990, CRC Press.10.1201/9781003078944-26 ↗
39. Bai, M., Kendorski, F.S., and Van Roosendaal, D.J. (1995, January 1–3). Chinese and North American high-extraction underground coal mining strata behavior and water protection experience and guidelines. Proceedings of the Conference on Ground Control in Mining, Morgantown, WV, USA.
40. Research and Application of Reserved Narrow Coal Pillar Roof Cutting and Pressure Relief Technology in Qingyun Coal Industry