journal article·2025-05-16Open access

Experimental Investigation on Joint Effects in Rock Cutting with a Conical Pick Under Unrelieved Cutting Conditions

Han-Eol Kim, Min-Seong Kim, Wan-Kyu Yoo, Chang-Yong Kim, Ji-Seok Yun

Applied Sciences· Volume 15· Issue 10

Abstract

In this study, a series of unrelieved cutting tests was conducted to analyze the effect of joints on rock cutting using a conical pick. The tests were performed on jointed rock mass specimens with joint spacings (Js) of 30, 60, and 90 mm and at cutting depths of 3, 6, 9, and 12 mm. For each case, the distance between the cutting path and the joint plane (d) was varied from 0.1Js to 0.5Js. The cutting force decreased as the distance from the joint plane increased but reached the level observed in intact rock at the midpoint between adjacent joint planes (d = 0.5Js). Regardless of joint spacing, the cutting force reached its minimum when d was between 0.2Js and 0.3Js. The rock fragmentation zone extended beyond the joint plane when d was 0.1Js but became confined within the joint plane from around 0.2Js to 0.3Js. These results indicate that the influence of the joint is most pronounced within this range. Three types of crack propagation patterns were observed near the joint plane: (1) cracks that terminate at the joint along the shortest path, (2) cracks that pass through the joint and reach the opposite free surface, and (3) cracks that end at a free surface located just inside the joint plane. These observations suggest that the reduction in cutting force can be attributed to shorter crack propagation paths due to the presence of the joint. This study contributes to a better understanding of the cutting behavior of jointed rock masses when using a conical pick.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Drilling and Well Engineering · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Geotechnical Engineering Research, Korea Institute of Civil Engineering and Building Technology, 283 Goyangdae-ro, Ilsanseo-gu, Goyang-si 10223, Republic of Korea

Department of Energy and Resources Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea

Department of Smartcity Engineering, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Republic of Korea

Funding

Korea Agency for Infrastructure Technology Advancement (KAIA)

References (40)

Show source-provided references
1. TBM performance estimation using rock mass classifications10.1016/S1365-1609(02)00069-2 ↗
2. A new hard rock TBM performance prediction model for project planning10.1016/j.tust.2011.04.004 ↗
3. Rock Joint Rate (RJR); a new method for performance prediction of tunnel boring machines (TBMs) in hard rocks10.1016/j.tust.2017.12.022 ↗
4. Application of rock mass classification systems for performance estimation of rock TBMs using regression tree and artificial intelligence algorithms10.1016/j.tust.2019.103046 ↗
5. A study of various models used in the estimation of advance rates for hard rock TBMs10.1016/j.tust.2019.103219 ↗
6. Setting up simple estimating equations of TBM penetration rate using rock mass classification parameters10.1016/j.tust.2021.104065 ↗
7. Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters10.1016/j.tust.2004.08.006 ↗
8. Numerical modelling of the effects of joint spacing on rock fragmentation by TBM cutters10.1016/j.tust.2005.06.004 ↗
9. Simultaneous effects of joint spacing and orientation on TBM cutting efficiency in jointed rock masses10.1007/s00603-012-0314-2 ↗
10. Numerical study to estimate the cutting power on a disc cutter in jointed rock mass10.1007/s12205-015-2265-0 ↗
11. Rock fragmentation induced by a TBM disc-cutter considering the effects of joints: A numerical simulation by DEM10.1016/j.compgeo.2021.104230 ↗
12. Investigating the effect of discontinuity geometrical parameters on the TBM performance in hard rock10.1016/j.tust.2018.11.039 ↗
13. Study on the influence of joint spacing on rock fragmentation under TBM cutter by linear cutting test10.1016/j.tust.2016.02.018 ↗
14. Investigation on the cracking character of jointed rock mass beneath TBM disc cutter10.1007/s00603-017-1395-8 ↗
15. Effects of joints on the cutting behavior of disc cutter running on the jointed rock mass10.1016/j.tust.2018.07.023 ↗
16. Effect of Joint Orientation on the Breakage Behavior of Jointed Rock Mass Loaded by Disc Cutters10.1007/s00603-021-02379-1 ↗
17. An Optimization Methodology of Cutter-Spacing for Efficient Mechanical Breaking of Jointed Rock Mass10.1007/s00603-022-02806-x ↗
18. Disc-cutter induced rock breakage mechanism for TBM excavation in rock masses with different joint shear strengths10.1016/j.undsp.2023.12.006 ↗
19. Thuro, K., and Plinninger, R.J. (1999, January 25–28). Roadheader excavation performance-geological and geotechnical influences. Proceedings of the 9th ISRM Congress, Paris, France.
20. A cutting comparison
21. Estimation of rock cuttability from shore hardness and compressive strength properties10.1007/s00603-006-0108-5 ↗
22. Comparative studies on the performance of a roadheader, impact hammer and drilling and blasting method in the excavation of metro station tunnels in istanbul10.1016/j.tust.2009.11.002 ↗
23. The performance prediction of roadheaders from easy testing methods10.1007/s10064-015-0801-2 ↗
24. The needle penetration index to estimate the performance of an axial type roadheader used in a coal mine10.1007/s40948-018-0097-3 ↗
25. Performance prediction: A key issue in mechanical hard rock mining
26. Copur, H., Ozdemir, L., and Rostami, J. (1998, January 9–11). Roadheader applications in mining and tunneling industries. Proceedings of the Annual Meeting of American Society for Mining, Metallurgy and Exploration (SME), Orlando, FL, USA.
27. Roadheaders glean valuable tips for istanbul metro
28. A model to predict the performance of roadheaders based on the rock mass brittleness index
29. A new model to predict roadheader performance using rock mass properties10.1007/s12404-013-0109-4 ↗
30. A new rock mass cuttability classification for roadheaders used in coal mining
31. The investigation of rock cutting simulation based on discrete element method
32. Wang, M. (2024). Study conical pick cutting performance and fatigue life in breaking rock plate process with numerical simulation. Sci. Rep., 14.10.1038/s41598-024-51351-w ↗
33. (2014). Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens Under Varying States of Stress and Temperatures (Standard No. ASTM D7012-14).
34. (2008). Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens (Standard No. ASTM D3967-08).
35. (2015). Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone (Standard No. ASTM C97/C97M-15).
36. Kim, H.E., Kim, M.S., Yoo, W.K., and Kim, C.Y. (2025). Experimental investigation on the effects of cutting direction and joint spacing on the cuttability behaviour of a conical pick in jointed rock mass. Appl. Sci., 15.10.3390/app15084347 ↗
37. Drag pick cutting tests: A comparison between experimental and theoretical results10.1016/j.jrmge.2018.02.007 ↗
38. Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results10.1016/j.ijrmms.2005.04.009 ↗
39. Theory of the cutting force for point-attack picks10.1007/BF00880858 ↗
40. Effects of discontinuities on penetration of TBM cutters10.1007/s11771-015-2903-1 ↗