Effect of Blank-Holder Force in Springback of a Gas Cooktop Component Made from Non-Stable Austenitic 1.4301 Steel
Source abstract
Abstract
The main dimensional errors in stamped parts are caused by the springback phenomenon. Those errors usually lead to assembly difficulties and/or the malfunction of those parts. The objective of this contribution is to give a comprehensive and detailed view of the sheet metal-forming process of an actual industrial part, with the focus on the setup adjustment of the blank-holder force (BHF), using the springback as the determining factor of the manufacturing quality. The complete cycle of the simulation will be detailed from the experimental determination of the model parameters to the correlation with experimental results of the simulated values. Many studies use simple geometries with limited practical application, failing to provide a quantitative understanding of actual springback in industrial processes. This work aims to offer a realistic reference for springback in a real production part, combining numerical prediction during design using a well-established model and experimental measurements in the factory. The simulation, carried out using LS-DYNA, determines the influence of the BHF in the springback observed in the manufacturing process of a gas cooktop part made from non-stable austenitic 1.4301 steel. The material has been modeled using Barlat’s Yld2000, experimentally determining the strain rate-dependent hardening, yield locus and isotropic–kinematic hardening. To validate the model, an experimental campaign has been developed, testing the part with values of BHF within the range of 50 t to 200 t. The results show that the numerical model is able to represent the influence of the BHF on the springback, demonstrating the relation between them.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Structural and Mechanical Department, Universidad de Cantabria, 39005 Santander, Spain
BSH Home Appliances Group, 39011 Santander, Spain
Funding
Banco Santander, Government of Cantabria and University of Cantabria
References (47)
Show source-provided references
1. Metal forming progress since 200010.1016/j.cirpj.2008.06.005 ↗
2. An analysis of springback in sheet metal bending using finite element method (FEM)10.1016/j.jmatprotec.2006.12.026 ↗
3. Plane stress yield function for aluminum alloy sheets. Part 1: Theory10.1016/S0749-6419(02)00019-0 ↗
4. Experimental determination of the FLD for sheet thickness from 2.5 to 5.0 mm
5. Formability limits by fracture in sheet metal forming10.1016/j.jmatprotec.2014.02.026 ↗
6. Forming and fracture limits of austenitic stainless steel sheets10.1016/j.msea.2007.11.006 ↗
7. Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions10.1016/j.actamat.2009.02.020 ↗
8. Prediction of necking and wrinkling in sheet-metal forming10.1016/0924-0136(94)01380-J ↗
9. Wagoner, R., and Li, M. (2005). Advances in springback. AIP Conference Proceedings, American Institute of Physics.10.1063/1.2011219 ↗
10. A springback prediction method for a cylindrical workpiece bent with the multi-point forming method10.1007/s00170-018-2993-7 ↗
11. Finite element analysis of springback in bending of aluminium sheets10.1016/S0261-3069(01)00062-0 ↗
12. Predicting springback in sheet metal forming: An explicit to implicit sequential solution procedure10.1016/S0168-874X(99)00009-8 ↗
13. On the non-linear unloading behavior of a biaxially loaded dual-phase steel sheet10.1016/j.ijmecsci.2018.02.015 ↗
14. A review of certain aspects of the Bauschinger effect in metals10.1016/0025-5416(79)90043-0 ↗
15. On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses10.1016/j.ijplas.2016.05.009 ↗
16. U-channel forming analysis with an emphasis on springback deformation10.1016/j.matdes.2005.05.008 ↗
17. A new model for springback prediction in which the Bauschinger effect is considered10.1016/S0020-7403(01)00012-1 ↗
18. Springback study of RDB of rectangular H96 tube10.1016/j.ijmecsci.2018.02.022 ↗
19. Investigation of springback in high strength anisotropic steels10.1016/j.jmatprotec.2004.04.423 ↗
20. Improving dimensional accuracy of a u-shaped part through an orthogonal design experiment10.1016/S0168-874X(02)00072-0 ↗
21. Finite element simulation of springback in sheet metal forming10.1016/S0924-0136(02)00393-X ↗
22. Bauschinger effect calibration by the different types of loading/reverse loading tests for springback prediction in sheet metal forming10.1007/s12289-023-01738-3 ↗
23. Analysis of springback of aluminum and high-strength steels through a new large strain anisotropic elastoplastic formulation based on elastic corrector rates10.1007/s12289-022-01693-5 ↗
24. Effect of hardening laws and yield function types on spring-back simulations of dual-phase steel automotive sheets10.1007/BF03027546 ↗
25. Upper-bound anisotropic yield locus calculation10.1016/0020-7403(80)90011-9 ↗
26. Tekkaya, A.E., Homberg, W., and Brosius, A. (2015). BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes. 60 Excellent Inventions in Metal Forming, Springer.10.1007/978-3-662-46312-3 ↗
27. Advances in Anisotropy of Plastic Behaviour and Formability of Sheet Metals10.1007/s12289-020-01580-x ↗
28. Calibration of Barlat Yld2004-18P yield function using CPFEM and 3D RVE for the simulation of single point incremental forming (SPIF) of 7075-O aluminum sheet10.1016/j.ijmecsci.2018.05.015 ↗
29. Stress update algorithm for enhanced homogeneous anisotropic hardening model10.1016/j.cma.2014.12.016 ↗
30. Limitation analysis of the Hill48 yield model and establishment of its modified model for planar plastic anisotropy10.1016/j.jmatprotec.2021.117380 ↗
31. Gao, X., Wang, S., Xu, Z., Zhou, J., Wan, X., Rayhan, H.M.A., and Lou, Y. (2023). Plastic Evolution Characterization for 304 Stainless Steel by CQN Chen Model under the Proportional Loading. Materials, 16.10.3390/ma16216828 ↗
32. Du, K., Dong, L., Zhang, H., Mu, Z., Dong, H., Wang, H., Ren, Y., Sun, L., Zhang, L., and Yuan, X. (2023). Modeling of Eyld2000-2d Anisotropic Yield Criterion Considering Strength Differential Effect and Analysis of Optimal Calibration Strategy. Materials, 16.10.3390/ma16196445 ↗
33. Experimental and numerical evaluation of multilayer sheet forming process parameters for light weight structures using innovative methodology10.1007/s12289-014-1198-3 ↗
34. Robustness of deep-drawing finite-element simulations to process variations10.1007/s12289-022-01695-3 ↗
35. Deformation induced martensite in an AISI 301LN stainless steel: Characterization and influence on pitting corrosion resistance10.1590/S1516-14392007000400007 ↗
36. Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling10.1007/BF02663916 ↗
37. New criteria for predicting the press performance of deep drawing sheets
38. Texture and earing in deep drawing of aluminium10.1016/0001-6160(61)90220-6 ↗
39. A proposal of a planar simple shear test in sheet metals
40. The Effect of Strain Rate Sensitivity on Theoretical Prediction of Limiting Draw Ratio for Cylindrical Cup Drawing Process10.1016/j.matdes.2006.05.014 ↗
41. An Investigation of Enhanced Formability in AA5182-O Aluminum During High-Rate Free-Forming at Room Temperature: Quantification of Deformation History10.1016/j.jmatprotec.2013.07.015 ↗
42. Investigation on Formability Enhancement of 5A06 Aluminium Sheet by Impact Hydroforming10.1016/j.cirp.2018.04.024 ↗
43. A Novel Method to Evaluate the High Strain Rate Formability of Sheet Metals under Impact Hydroforming10.1016/j.jmatprotec.2019.116553 ↗
44. Plastic instability under plane stress10.1016/0022-5096(52)90002-1 ↗
45. Tensile instability and necking in materials with strain hardening and strain-rate hardening10.1016/0001-6160(77)90072-4 ↗
46. Large strain deformation of polycrystalline metals at low homologous temperatures10.1016/0022-5096(75)90018-6 ↗
47. Hora, P. (2015, January 29–30). Friction modelling in sheet metal forming simulations: Application and validation on an U-Bend product. Proceedings of the Advanced Constitutive Models in Sheet Metal Forming, Zurich, Switzerland.