A Thermo-mechanical-oxidation-diffusion Coupled Peridynamic Model for Ablative Behavior of ZrC-Coated C/C Composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Numerical methods in engineering · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Tang S, Deng J, Liu W, Yang K. Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler. Carbon. 2006;44(14):2877–82.10.1016/j.carbon.2006.06.003 ↗
2. Chen S, Qiu X, Zhang B, et al. Advances in antioxidation coating materials for carbon/carbon composites. J Alloys Compd. 2021;886:161143.10.1016/j.jallcom.2021.161143 ↗
3. Arai Y, Inoue R, Goto K, Kogo Y. Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review. Ceram Int. 2019;45(12):14481–9.10.1016/j.ceramint.2019.05.065 ↗
4. Jin X, Fan X, Lu C, Wang T. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites. J Eur Ceram Soc. 2018;38(1):1–28.10.1016/j.jeurceramsoc.2017.08.013 ↗
5. Wang SL, Li Kzhi, Li HJ, Zhang YL. Microstructure and ablation resistance of ZrC nanostructured coating for carbon/carbon composites. Mater Lett. 2013;107:99–102.10.1016/j.matlet.2013.05.124 ↗
6. Zhao D, Zhang C, Hu H, Zhang Y. Ablation behavior and mechanism of 3D c/zrc composite in oxyacetylene torch environment. Compos Sci Technol. 2011;71(11):1392–6.10.1016/j.compscitech.2011.05.005 ↗
7. Tong Y, Bai S, Chen K. C/C–ZrC composite prepared by chemical vapor infiltration combined with alloyed reactive melt infiltration. Ceram Int. 2012;38(7):5723–30.10.1016/j.ceramint.2012.04.017 ↗
8. Li C, Li K, Li H, et al. Microstructure and ablation resistance of carbon/carbon composites with a zirconium carbide rich surface layer. Corros Sci. 2014;85:160–6.10.1016/j.corsci.2014.04.013 ↗
9. Sun W, Xiong X, Huang B, yun, et al. ZrC ablation protective coating for carbon/carbon composites. Carbon. 2009;47(14):3368–71.10.1016/j.carbon.2009.07.047 ↗
10. Zhong L, Guo L, Huang J, Liu N, Li Y, Li H. Ablation behavior of the ZrC coating on C/C composite with the construction of thermal dispersal network. Ceram Int. 2023;49(9):13903–15.10.1016/j.ceramint.2022.12.270 ↗
11. Gasparrini C, Chater RJ, Horlait D, Vandeperre L, Lee WE. Zirconium carbide oxidation: kinetics and oxygen diffusion through the intermediate layer. J Am Ceram Soc. 2018;101(6):2638–52.10.1111/jace.15479 ↗
12. Jacobson NS, Roth DJ, Rauser RW, Cawley JD, Curry DM. Oxidation through coating cracks of SiC-protected carbon/carbon. Surf Coat Technol. 2008;203(3–4):372–83.10.1016/j.surfcoat.2008.09.013 ↗
13. Wang C, Ai S, Fang D. Effect of oxidation-Induced material parameter variation on the high temperature oxidation behavior of nickel. Acta Mech Solida Sin. 2016;29(4):337–44.10.1016/S0894-9166(16)30237-3 ↗
14. Hille TS, Turteltaub S, Suiker ASJ. Oxide growth and damage evolution in thermal barrier coatings. Eng Fract Mech. 2011;78(10):2139–52.10.1016/j.engfracmech.2011.04.003 ↗
15. Al-Athel K, Loeffel K, Liu H, Anand L. Modeling decohesion of a top-coat from a thermally-growing oxide in a thermal barrier coating. Surf Coat Technol. 2013;222:68–78.10.1016/j.surfcoat.2013.02.005 ↗
16. Silling SA. Reformulation of elasticity theory for discontinuities and long-range forces. J Mech Phys Solids. 2000;48(1):175–209.10.1016/S0022-5096(99)00029-0 ↗
17. Chu S, Bai J, Zhao ZL, Liu Y, Huang D, Li B, Li Q, Feng XQ. Peridynamic fracture analysis of film-substrate systems. J Mech Phys Solids. 2024;191:105757.10.1016/j.jmps.2024.105757 ↗
18. Peddakotla SA, Yuan J, Minisci E, Vasile M, Fossati M. A numerical approach to evaluate temperature-dependent peridynamics damage model for destructive atmospheric entry of spacecraft. Aeronaut J. 2023;127(1309):398–427.10.1017/aer.2022.69 ↗
19. Oterkus S, Madenci E, Agwai A. Fully coupled peridynamic thermomechanics[J]. J Mech Phys Solids. 2014;64:1–23.10.1016/j.jmps.2013.10.011 ↗
20. Wang CC, Liu QW, Liu LS, Lai X. Numerical simulation of ablation temperature for thermal protective composites based on peridynamics. Scicence Technolody Eng. 2017;17:172–6.
21. Zhang X, Li K, Tang J, Cheng Z. Coupled Thermo-Mechanical peridynamics simulation for analyzing failure of ECC under High-Temperature loads. Acta Mech Solida Sin. 2024;37(6):932–57.10.1007/s10338-024-00502-7 ↗
22. Zhang Y, Behera D, Madenci E. Peridynamic modeling of thermal response and cracking in charring materials due to ablation. Engineering with Computers. 2024;40(1):343–65.10.1007/s00366-023-01796-w ↗
23. Huang YZ, Yu Y, Hu YL, Yao ZY, Wu D. Multi-physical analysis of ablation for C/C composites based on peridynamics. Acta Astronaut. 2024;214:1–0.10.1016/j.actaastro.2023.10.017 ↗
24. Xiang Y, Qin B, Jiao Z, Zhong Z. A thermo-chemo-mechanically coupled peridynamics for investigating crack behavior in solids. Appl Math Model. 2024;130:208–27.10.1016/j.apm.2024.02.031 ↗
25. Wen Z, Zhang R, Hou C, Shen Q, Zhao M, Wan X. A PD-FEM coupling approach for the analysis of oxidation and out-of-plane compression failure of 2D braided C/C composites. Eng Fract Mech. 2025:110866.10.1016/j.engfracmech.2025.110866 ↗
26. Li Y, Liu Q, Liu L, Mei H. The coupled Thermo-Chemo-Mechanical peridynamics for ZrB2 ceramics ablation behavior. CMES-Computer Model Eng Sci. 2023;135(1).10.32604/cmes.2022.021258 ↗
27. Wen Z, Hou C, Zhao M, Wan X. A peridynamic model for coupled thermo-mechanical-oxygenic analysis of C/C composites with SiC coating. Compos Struct. 2023;323:117441.10.1016/j.compstruct.2023.117441 ↗
28. Clarke DR. The lateral growth strain accompanying the formation of a thermally grown oxide. Acta Mater. 2003;51(5):1393–407.10.1016/S1359-6454(02)00532-3 ↗
29. Bobaru F, Duangpanya M. A peridynamic formulation for transient heat conduction in bodies with evolving discontinuities. J Comput Phys. 2012;231(7):2764–85.10.1016/j.jcp.2011.12.017 ↗
30. Chen W, Gu X, Zhang Q, Xia X. A refined thermo-mechanical fully coupled peridynamics with application to concrete cracking. Eng Fract Mech. 2021;242:107463.10.1016/j.engfracmech.2020.107463 ↗
31. Shen XT, Li KZ, Li HJ, Fu QG, Li SP, Deng F. The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame. Corros Sci. 2011;53(1):105–12.10.1016/j.corsci.2010.09.028 ↗
32. McBride BJ. Computer program for calculation of complex chemical equilibrium compositions and applications. NASA Lewis Research Center; 1996.
33. Min L, Wang Z, Hu X, et al. A chemo-thermo-mechanical coupled phase field framework for failure in thermal barrier coatings. Comput Methods Appl Mech Eng. 2023;411:116044.10.1016/j.cma.2023.116044 ↗
34. Shen Q, Li SZ, Yang L, Zhou YC, Wei YG, Yuan T. Coupled mechanical-oxidation modeling during oxidation of thermal barrier coatings. Comput Mater Sci. 2018;154:538–46.10.1016/j.commatsci.2018.08.017 ↗
35. Chen Z, Jafarzadeh S, Zhao J, Bobaru F. A coupled mechano-chemical peridynamic model for pit-to-crack transition in stress-corrosion cracking. J Mech Phys Solids. 2021;146:104203.10.1016/j.jmps.2020.104203 ↗
36. Jafarzadeh S, Chen Z, Li S, Bobaru F. A peridynamic mechano-chemical damage model for stress-assisted corrosion. Electrochim Acta. 2019;323:134795.10.1016/j.electacta.2019.134795 ↗
37. Bobaru F, Duangpanya M. The peridynamic formulation for transient heat conduction. Int J Heat Mass Transf. 2010;53(19–20):4047–59.10.1016/j.ijheatmasstransfer.2010.05.024 ↗
38. Silling SA, Askari E. A Meshfree method based on the peridynamic model of solid mechanics. Comput Struct. 2005;83(17–18):1526–35.10.1016/j.compstruc.2004.11.026 ↗
39. Seleson P. Improved one-point quadrature algorithms for two-dimensional peridynamic models based on analytical calculations. Comput Methods Appl Mech Eng. 2014;282:184–217.10.1016/j.cma.2014.06.016 ↗
40. Bobaru F, Yang M, Alves LF, Silling SA, Askari E, Xu J. Convergence, adaptive refinement, and scaling in 1D peridynamics. Numer Meth Eng. 2009;77(6):852–77.10.1002/nme.2439 ↗
41. Meade C. A computational fluid dynamic analysis of oxyacetylene combustion flow for use in material response boundary conditions. University of Kentucky, 2023. Theses and Dissertations-Mechanical Engineering. 217.
42. Cuesta A, Martinez-Alonso A, Tascon JMD. Correlation between arrhenius kinetic parameters in the reaction of different carbon materials with oxygen. Energy Fuels. 1993;7(6):1141–5.10.1021/ef00042a064 ↗
43. Krause T, Tushtev K, Koch D, Grathwohl G. Interlaminar mode I crack growth energy release rate of carbon/carbon composites. Eng Fract Mech. 2013;100:38–51.10.1016/j.engfracmech.2012.07.003 ↗
44. Yan N, Fu Q, Tong M, Zhang J, Sun J, Shen Q. Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure. Compos Part B: Eng. 2021;222:109040.10.1016/j.compositesb.2021.109040 ↗
45. Iuga M, Raether F. FEM simulations of microstructure effects on thermoelastic properties of sintered ceramics. J Eur Ceram Soc. 2007;27(2–3):511–6.10.1016/j.jeurceramsoc.2006.04.072 ↗
46. Katoh Y, Vasudevamurthy G, Nozawa T, Snead LL. Properties of zirconium carbide for nuclear fuel applications. J Nucl Mater. 2013;441(1–3):718–42.10.1016/j.jnucmat.2013.05.037 ↗
47. Virkar AV, Johnson DL. Fracture behavior of ZrO2 -Zr composites. J Am Ceram Soc. 1977;60(11–12):514–9.10.1111/j.1151-2916.1977.tb14096.x ↗
48. Lommens P, De Meyer C, Bruneel E, De Buysser K, Van Driessche I, Hoste S. Synthesis and thermal expansion of ZrO2/ZrW2O8 composites. J Eur Ceram Soc. 2005;25(16):3605–10.10.1016/j.jeurceramsoc.2004.09.015 ↗
49. Rama Rao GA, Venugopal V. Kinetics and mechanism of the oxidation of ZrC. J Alloys Compd. 1994;206(2):237–42.10.1016/0925-8388(94)90042-6 ↗
50. Wang SL, Li Kzhi, Li HJ, Zhang YL, Feng T. Structure evolution and ablation behavior of ZrC coating on C/C composites under single and Cyclic oxyacetylene torch environment. Ceram Int. 2014;40(10):16003–14.10.1016/j.ceramint.2014.07.132 ↗
51. Jiang CP, Wu XF, Li J, et al. A study of the mechanism of formation and numerical simulations of crack patterns in ceramics subjected to thermal shock. Acta Mater. 2012;60(11):4540–50.10.1016/j.actamat.2012.05.020 ↗