Research on the Influence of Rectifying Orifice Plate on the Airflow Uniformity of Exhaust Hood

Designing and improving collection systems for dust and toxic pollutants is crucial for improving the safety and indoor air quality of laboratory buildings. Push–pull ventilation systems with uniformly distributed parallel airflow have been proven to be of great help in this task. Designing exhaust hoods with parallel airflow distribution can effectively enhance the airflow uniformity of push–pull ventilation systems, especially when combining it with the implementation of rectifying orifice plates on the exhaust hoods. Therefore, this study combines a computational fluid dynamics (CFD) method and experimental approach to analyze the influence of key factors that lead to improvements in the airflow uniformity through the use of rectifying orifice plates, namely the aperture and porosity, as well as the number of rectifying orifice plates on the airflow uniformity of exhaust hoods. The study shows the following: (1) The aperture of the rectifying orifice plate considerably affects the airflow uniformity of the exhaust hood. Specifically, near the exhaust hood outlet, the airflow uniformity is negatively correlated with the aperture; conversely, near the exhaust hood inlet, the airflow uniformity is positively correlated with the aperture. (2) A rectifying orifice plate with a porosity of 35.43% can effectively improve the airflow uniformity of the exhaust hood. (3) Exhaust hoods with a double-layer rectifying orifice plate structure can improve airflow uniformity by approximately 40% compared to those with a single-layer structure. The above research results can guide the optimization of exhaust hood design to improve airflow uniformity, thereby effectively enhancing the capture efficiency of the push–pull ventilation system for dust and toxic pollutants and providing a safer environment for experimenters in laboratory buildings.