Increasing the Efficiency of Ecological Solar Panels Combined with the Building’s Roof
Source abstract
Abstract
This article is devoted to increasing the efficiency of ecological solar panels with their combination with the house’s roof. A solar panel construction that combines both the solar collector and the building cover is considered. This work investigates the efficiency of solar panels depending on the type of coating, heat-carrying medium mass flow rate, tube diameter, and the distance between the tubes. Among the coatings, Grafplast PDA roofing material is the most effective. Prandelli/Tuborama tubes with a diameter of 16 mm are recommended. The diameter of the tubes significantly affects the efficiency of the solar panel only at low intensity of solar radiation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, 79013 Lviv, Ukraine
Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, 03041 Kyiv, Ukraine
References (31)
Show source-provided references
1. Solar thermal in China: Overview and perspectives of the Chinese solar thermal market10.1016/S1471-0846(05)70454-6 ↗
2. Numerical and experimental study of a combined solar Chinese kang and solar air heating system based on Qinghai demonstration building10.1016/j.enbuild.2017.03.023 ↗
3. Performance comparison investigation on solar photovoltaic-thermoelectric generation and solar photovoltaic-thermoelectric cooling hybrid systems under different conditions10.1080/14786451.2017.1345906 ↗
4. Heat transfer model of hot-wall Kang based on the non-uniform Kang surface temperature in Chinese rural residences
5. Neumann, F., Patschke, M., and Schoennenbeck, M. (2006). Heliothermal Flat Collector Module Having a Sandwich Structure. (No. HK1084175A1), Patent Application.
6. Riegger, C. (2008). Transpired solar collector walls. Use solar, save green. Interface, 5–8.
7. Kaplun, V., and Osypenko, V. (2019, January 17–19). About Using Electricity Pricing for Smart Grid Dynamic Management with Renewable Sources. Proceedings of the IEEE 6th International Conference on Energy Smart Systems, Kyiv, Ukraine.10.1109/ESS.2019.8764224 ↗
8. Influence of Orientation of Buildings Facades on the Level of Solar Energy Supply to Them10.1007/978-3-030-57340-9_61 ↗
9. Voznyak, O., Spodyniuk, N., Antypov, I., Dudkiewicz, E., Kasynets, M., Savchenko, O., and Tarasenko, S. (2023). Efficiency Improvement of Eco-Friendly Solar Heat Supply System as a Building Coating. Sustainability, 15.10.3390/su15032831 ↗
10. The energy analysis of a hybrid hot tap water preparation system based on renewable and waste sources10.1016/j.energy.2017.03.061 ↗
11. Assessment of the Economic Feasibility of Using Alternative Energy Sources in Ukraine10.1007/978-3-030-57340-9_59 ↗
12. Enhancing of Efficiency of Solar Panels Combined with Building Coating10.1007/978-3-031-14141-6_14 ↗
13. Active filters application for energy losses reduction in three-phase power supply systems
14. Adamski, M. (2017, January 2–5). Mini longitudinal flow spiral recuperator. Proceedings of the Healthy Buildings Europe 2017, Lublin, Poland.
15. Reducing energy consumption with using ventilation and solar cooling, school building’s case study10.1556/Pollack.6.2011.2.11 ↗
16. Application of Thermosiphon Solar Collectors for Ventilation of Premises10.1007/978-3-030-27011-7_23 ↗
17. Venhryn, I., Shapoval, S., Voznyak, O., Datsko, O., and Gulai, B. (2021, January 22–25). Modelling of optical characteristics of the Thermal Photovoltaic Hybrid Solar Collector. Proceedings of the International Scientific and Technical Conference on Computer Sciences and Information Technologies, Lviv, Ukraine.10.1109/CSIT52700.2021.9648738 ↗
18. Using of thermosiphon solar collector in an air heating system of passive house10.1556/606.2016.11.2.11 ↗
19. Multifactor analysis of university buildings’ energy efficiency
20. Theoretical and experimental investigation of the efficiency of the use of heat-accumulating material for heat supply systems10.21303/2461-4262.2019.00901 ↗
21. Building inside air temperature parametric study
22. Ventilation system with spiral recuperator10.1016/j.enbuild.2009.11.005 ↗
23. Buildings energy use and human thermal comfort according to energy and exergy approach10.1016/j.enbuild.2017.04.008 ↗
24. A model of human thermal comfort for analyzing the energy performance of buildings
25. Application of rooftop solar panels with coolant natural circulation10.1556/606.2020.00218 ↗
26. Elimination Options of Solar Heat Gains Through Transparent Surfaces–Review10.1007/978-3-031-44955-0_9 ↗
27. Research on Solar Collectors Integrated into the Glass Façade Construction of Buildings/Structures: Necessity and Specifics10.23939/jtbp2019.01.038 ↗
28. Analysis of the economic feasibility and reduction of a building’s energy consumption and emissions when integrating hybrid solar thermal/PV/micro-CHP systems10.1016/j.apenergy.2015.12.080 ↗
29. Solar Polymer Liquid Collectors: Analysis of Existing Results, New Solutions
30. A study on the structure of Solar/Photovoltaic Hybrid system for the purpose of preventing overheat and improving the system performance10.1016/j.solener.2021.10.019 ↗
31. He, Y.-L., Qiu, Y., Wang, K., Yuan, F., Wang, W.-Q., Li, M.-J., and Guo, J.-Q. (2020). Perspective of concentrating solar power. Energy, 198.10.1016/j.energy.2020.117373 ↗