journal article·2024-08-21Open access

Combustion Test for the Smallest Reciprocating Piston Internal Combustion Engine with HCCI on the Millimeter Scale

Huichao Shang, Li Zhang, Zhigang Tang, Jinlin Han, Yingzhang Wang, Tao Zhang

Applied Sciences· Volume 14· Issue 16

Abstract

Micro reciprocating piston internal combustion engines are potentially desirable for high-energy density micro power sources. However, complex subsystem functions hinder the downsizing of reciprocating piston internal combustion engines. The homogeneous charge compression-ignition (HCCI) combustion mode requires no external ignition system; it contributes to structural simplification of the reciprocating piston internal combustion engines under a micro space constraint but has not been adequately verified at the millimeter scale. The study used a millimeter-scale HCCI reciprocating piston internal combustion engine fueled by a mixture of kerosene, ether, castor oil, and isopropyl nitrate for combustion investigation. The test engine with a displacement of 0.547 cc is the smallest reciprocating piston internal combustion engine known to have undergone in-cylinder combustion diagnosis. It is observed that the HCCI combustion mode at the millimeter scale can realize stable combustion with excellent cooperation for the thermodynamic cycle under appropriate structural and operating conditions, which is essentially not inferior to those in conventional-sized reciprocating piston internal combustion engines. This finding helps the next step of scaling down reciprocating piston internal combustion engines.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Combustion Engine Technologies · Combustion and flame dynamics · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China

College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing 400044, China

State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China

Department of Mechanical Engineering, Eindhoven University of Technology, NL 5600 Eindhoven, The Netherlands

Funding

National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities · Science and Technology Research Project of Henan Province

References (33)

Show source-provided references
1. Microscale combustion: Technology development and fundamental research10.1016/j.pecs.2011.03.001 ↗
2. Recent progress in flame stabilization technologies for combustion-based micro energy and power systems10.1016/j.fuel.2020.119391 ↗
3. Advances in MEMS and microfluidics-based energy harvesting technologies10.1002/admt.202101347 ↗
4. Employing Taguchi method to optimize the performance of a microscale combined heat and power system with Stirling engine and thermophotovoltaic array10.1016/j.energy.2023.126897 ↗
5. Process in micro-combustion and energy conversion of micro power system: A review10.1016/j.enconman.2021.114664 ↗
6. Velidi, G., and Yoo, C.S. (2023). A Review on flame stabilization technologies for UAV engine micro-meso scale combustors: Progress and challenges. Energies, 16.10.3390/en16093968 ↗
7. Scaling laws for free piston Stirling engine design: Benefits and challenges of miniaturization10.1016/j.energy.2013.05.009 ↗
8. Advances in the Development of a Microturbine Engine10.1115/1.4026541 ↗
9. Miniaturization limitations of rotary internal combustion engines10.1016/j.enconman.2016.01.002 ↗
10. The effects of the various factors and the engine size on micro internal combustion swing engine (MICSE)10.1016/j.applthermaleng.2018.08.067 ↗
11. An experimental and theoretical investigation of a small, high aspect-ratio, free-piston, two-stroke engine10.1016/j.jppr.2020.11.001 ↗
12. A 7-mg miniature catalytic-combustion engine for millimeter-scale robotic actuation10.1016/j.sna.2021.112818 ↗
13. Analysis of a Microscale ‘Saturation Phase-Change Internal Carnot Engine’10.1016/j.enconman.2009.12.031 ↗
14. A MEMS turbopump for high temperature rankine micro heat engines—Part I: Design and fabrication10.1109/JMEMS.2020.3008665 ↗
15. Correlations for the performance, efficiency, and energy losses for single cylinder, four-cycle internal combustion engines with displaced volumes ranging from 40 to 200 cc10.1115/1.4053563 ↗
16. Performance enhancement of a small two-stroke engine using nitromethane blends10.2514/1.B37181 ↗
17. Rowton, A.K., Ausserer, J.K., Grinstead, K.D., Litke, P.J., and Polanka, M.D. (2014, January 18–20). Measuring Scaling Effects in Small Two-Stroke Internal Combustion Engines. Proceedings of the SAE/JSAE 2014 Small Engine Technology Conference & Exhibition, Pisa, Italy. SAE Technical Paper 2014-32-0010.10.4271/2014-32-0010 ↗
18. Tang, G.Z., Wang, S.B., Zhang, L., and Shang, H.C. (2020). Diagnosis and improvement of combustion characteristics of methanol miniature reciprocating piston internal combustion engine. Micromachines, 11.10.3390/mi11010096 ↗
19. Scaling of miniature piston-engine performance, part 1: Overall engine performance10.2514/1.B34638 ↗
20. Scaling of miniature piston engine performance, Part 2: Energy losses10.2514/1.B34639 ↗
21. Raine, R.R., and Thorwarth, H. (2004, January 8–11). Performance and Combustion Characteristics of a Glow-Ignition Two-Stroke Engine. Proceedings of the SAE 2004 World Congress & Exhibition, Detroit, MI, USA. SAE Technical Paper 2004-01-1407.10.4271/2004-01-1407 ↗
22. Collair, K., and Floweday, G. (2008, January 23–25). Understanding HCCI Characteristics in Mini HCCI Engines. Proceedings of the 2008 SAE International Powertrains, Fuels and Lubricants Congress, Shanghai, China. SAE Technical Paper 2008-1-1662.10.4271/2008-01-1662 ↗
23. Manente, V., Tunestal, P., and Johansson, B. (2007, January 29–31). Influence of the Compression Ratio on the Performance and Emissions of a Mini HCCI Engine Fueled with Diethyl Ether. Proceedings of the Powertrain & Fluid Systems Conference and Exhibition, Rosemont, IL, USA. SAE Technical Paper 2007-01-4075.10.4271/2007-01-4075 ↗
24. Manente, V., Tunestal, P., and Johansson, B. (2008, January 14–17). Influence of the Wall Temperature and Combustion Chamber Geometry on the Performance and Emissions of a Mini HCCI Engine Fueled with Diethyl Ether. Proceedings of the SAE World Congress & Exhibition, Detroit, MI, USA. SAE Technical Paper 2008-01-0008.10.4271/2008-01-0008 ↗
25. Tian, L. (2010, January 13–15). Experimental tests and simulations of a 1.5cc miniature glow-ignition two-stroke engine. Proceedings of the SAE World Congress & Exhibition, Detroit, MI, USA. SAE Technical Paper 2010-32-0018.10.4271/2010-32-0018 ↗
26. Adjusting mixture composition of alcohol-based fuels for improving combustion in a 0.99 cc miniature IC engine10.1016/j.cep.2020.107988 ↗
27. Experimental investigation about effect of glow intensity on combustion characteristics for a micro IC engine with platinum wire glow-ignition10.1016/j.applthermaleng.2016.08.059 ↗
28. Experiment on the influence of residual exhaust gas on the combustion characteristics of a miniature engine with platinum wire ignition10.1021/acsomega.2c00082 ↗
29. Small-Scale HCCI Engine Operation10.1080/00102202.2011.561819 ↗
30. Miniaturization limitations of HCCI internal combustion engines10.1016/j.applthermaleng.2008.03.020 ↗
31. The possibility of running homogeneous charge compression ignition in spark ignition and compression ignition small-scale engines10.1177/0957650911400671 ↗
32. Experimental test and thermodynamic analysis on scaling-down limitations of a reciprocating internal combustion engine10.1177/0036850420935731 ↗
33. Heywood, J.B. (1988). Internal Combustion Engine Fundamentals, McGraw-Hill. [1st ed.].