An Improved Surface Treatment Process of 304 Stainless Steel Based on Low-Temperature Chromizing and Ultrasonic Vibration Extrusion
Source abstract
Abstract
The ultrasonic vibration extrusion process is a widely used surface treatment process of stainless steel, e.g., 304 stainless steel, to improve the surface quality and increase hardness and wear resistance. However, for high-hardness 304 stainless steel, the traditional process, i.e., a single ultrasonic vibration extrusion process, does not fulfil its application requirements. To cope with this problem, this paper proposes an improved surface treatment method based on low-temperature chromizing and ultrasonic vibration extrusion to obtain the expected surface quality of 304 stainless steel. Using orthogonal design and multivariate regression, the influence of ultrasonic impact parameters on the surface integrity of 304 stainless steel was studied in this work. Finally, the experimental results show that the hardness of the surface processed by the proposed method is increased by about 2.55 times compared with the ultrasonic vibration extrusion process, and the surface roughness of the composite process is reduced by an average of 60.8% compared with that of unfinished surface. In addition, the optimal combination of process parameters is obtained: the spindle speed of 240 rpm, the feed of 0.1 mm/r, and the static extrusion of 40 μm, which can provide the optimal process parameter support for the surface treatment of 304 stainless steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Beijing Xinfeng Aerospace Equipment Co., Ltd., Beijing 100854, China
Institute of Artificial Intelligence, Beihang University, Beijing 100191, China
MIIT Key Laboratory of Intelligent Manufacturing Technology for Aeronautics Advanced Equipments, Ministry of Industry and Information Technology, Beijing 100191, China
References (33)
Show source-provided references
1. Park, J.H., and Kang, Y. (2017). Inclusions in stainless steels—A Review. Steel Res. Int., 88.10.1002/srin.201700130 ↗
2. Present status and prospect of ultra-high strength steel applied to aircraft landing gear
3. Research status of welding technology of ferritic stainless steel
4. Stability, and design of stainless-steel structures—Review and outlook10.1016/j.tws.2019.04.019 ↗
5. Francis, R., and Byrne, G. (2021). Duplex stainless steels-alloys for the 21st century. Metals, 11.10.3390/met11050836 ↗
6. Liu, L., Fan, C.L., and Sun, H.Y. (2022). Research progress of alumina-forming austenitic stainless steels: A review. Materials, 15.10.3390/ma15103515 ↗
7. Residual stress and microhardness evolution induced by conventional and ultrasonic shot peening10.1080/02670836.2022.2045551 ↗
8. Meng, Y., Deng, J.X., and Wu, J.X. (2022). Improved interfacial adhesion of AlTiN coating by micro-grooves using ultrasonic surface rolling processing. J. Mater. Process. Technol., 304.10.1016/j.jmatprotec.2022.117570 ↗
9. Kumar, S., Kumar, D., Singh, I., and Rath, D. (2022). An insight into ultrasonic vibration assisted conventional manufacturing processes: A comprehensive review. Adv. Mech. Eng., 14.10.1177/16878132221107812 ↗
10. Chromizing subsequent solid solution nitriding multiple process of 304 stainless steel
11. Blaha, F., and Langenecker, B. (1955). Tensile deformation of zinc crystal under ultrasonic vibration. Sci. Nat., 42.10.1007/BF00623773 ↗
12. Effect of ultrasonic vibration on coefficient of friction during strip drawing10.1121/1.1912511 ↗
13. Simulation of ultrasonic-vibration drawing using the finite element method10.1016/S0924-0136(03)00699-X ↗
14. Lucas, M., and Daud, Y. (2009). A finite element model of ultrasonic extrusion. J. Phys. Conf. Ser., 181.10.1088/1742-6596/181/1/012027 ↗
15. Manousakas, I., Lin, G.H., and Chang, S.J. (2010, January 18–20). Application of ultrasonic extrusion in the preparation of liposomes. Proceedings of the 2010 4th International Conference on Bioinformatics and Biomedical Engineering, Chengdu, China.10.1109/ICBBE.2010.5516549 ↗
16. Deep cold rolling with ultrasonic vibrations—A new mechanical surface enhancement technique10.1016/j.ijmachtools.2004.09.017 ↗
17. Effect of combined plasma-carburizing and deep-rolling on notch fatigue property of Ti-6Al-4V alloy10.1016/j.msea.2008.09.008 ↗
18. Effects of pack chromizing on the microstructure and anticorrosion properties of 316 L stainless steel10.1016/j.surfcoat.2019.03.022 ↗
19. Study on fatigue behavior of plasma chromizing strengthening layer on biphasic titanium alloy
20. Effect of ultrasonic impact on the friction and wear properties of chromized layer of 65 Mn steel
21. Dong, Z.H. (2020). Research on the Anti-Corrosion Properties of Surface Chromizing Layer on 316 L Stainless Steel, Shanghai Jiao Tong University.
22. Influence of solid chromizing doped with various rare earths on microstructures and properties of Cr-RE coatings fabricated by pack cementation
23. Basic research on ultrasonic extrusion for 45 steel shaft10.4028/www.scientific.net/KEM.455.288 ↗
24. Wang, H.Y. (2015). Research on the Ultrasonic Extrusion Strengthening Technology for Hollow Axle Material of High-Speed Train, Beijing Jiaotong University.
25. Zhou, H., Zhang, J., Yu, D., Feng, P., Wu, Z., and Cai, W. (2020). Advances in rotary ultrasonic machining system for hard and brittle materials. Adv. Mech. Eng., 11.10.1177/1687814019895929 ↗
26. Progresses on research and application of metal ultrasonic surface enhancement technologies10.3901/JME.2014.20.035 ↗
27. Ultrasonic-assisted extrusion of ZK60 Mg alloy micropins at room temperature10.1016/j.ultras.2017.03.012 ↗
28. Zhang, C.H. (2021). Parameter Determination of Constitutive Model of 18CrNiMo7-6 and Theoretical Analysis and Simulation of Ultrasonic Rolling, Zhengzhou University.
29. Effect of ultrasonic impact treatment on the surface integrity of nickel alloy 71810.1007/s40436-020-00329-8 ↗
30. Liu, Y. (2012). Research on the Theory of Ultrasonic Surface Rolling Processing and Mechanical Properties of Metal Surface, Tianjin University.
31. Experimental study on the cutting force during laser-assisted machining of fused silica based on the Taguchi method and response surface methodology10.1016/j.jmapro.2018.12.038 ↗
32. Ultrasonic surface strengthening of train axle material 30CrMoA10.1016/j.procir.2016.03.007 ↗
33. Fang, S., Zhang, Q., Zhao, H., Yu, J., and Chu, Y. (2018). The design of rare-earth giant magnetostrictive ultrasonic transducer and experimental study on its application of ultrasonic surface strengthening. Micromachines, 9.10.3390/mi9030098 ↗