journal article·2022-10-11Open access

Automatic Pressure Gelation Analysis for Insulating Spacer of Gas Insulated Switchgear Manufactured by Bio-Based Epoxy Composite

Chanyong Lee, Jaesung Bae, Yohan Noh, Han-Goo Cho, Young-Gi Hong, Hongsub Jee, Jaehyeong Lee

Applied Sciences· Volume 12· Issue 20

Abstract

In the case of the existing power equipment business, a variety of insulation and accessories is manufactured with petroleum-based epoxy resins. However, as petrochemical resources are gradually limited and concerns about the environment and economy grow, the power equipment industry has recently studied many insulating materials using bio-based epoxy to replace petroleum feedstock-based products in order to produce insulators using eco-friendly materials. In this paper, the simulation of the automatic pressure gelation process was performed by obtaining parameter values of curing kinetics and chemical rheology through physical properties analysis of bio-based epoxy complexes and applying them to Moldflow software. The simulation results were compared and analyzed according to the temperature control of each heater in the mold, while considering the total curing time, epoxy flow, and curing condition. A temperature condition of 140 °C/140 °C/135 °C/135 °C/130 °C/130 °C/120 °C/120 °C provided the optimal curing conditions. Based on the temperature conditions of the simulation results, the actual GIS spacer was manufactured, and x-ray inspection was performed to check the moldability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Polymer composites and self-healing · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon 16419, Gyeonggi-do, Korea

R&D Center, Dongwoo Electric Corp., 34, Oseongseo-ro, Anjung-eup, Pyeongtaek-si 17928, Gyeonggi-do, Korea

Funding

the Ministry of Trade, Industry & Energy (MOTIE, Korea)

References (43)

Show source-provided references
1. Ultra high-voltage gas-insulated switchgear—A technology milestone10.1002/etep.582 ↗
2. Spacer flashover in Gas Insulated Switchgear (GIS) with humid SF6 under different electrical stresses10.1016/j.ijepes.2019.105559 ↗
3. Controlled Voltage Breakdown in Disconnector Contact System for VFTO Mitigation in Gas-Insulated Switchgear (GIS)10.1109/TPWRD.2017.2676178 ↗
4. Bolin, P., and Koch, H. (2007, January 24–28). Gas Insulated Switchgear GIS—State of the Art. Proceedings of the 2007 IEEE Power Engineering Society General Meeting, Tampa, FL, USA.10.1109/PES.2007.385747 ↗
5. A Study on the Partial Discharge Resistance Characteristic for Optimizing the Mixing Ratio of Heterogeneous Inorganic Insulated Materials for Environmentally Friendly GIS Spacer
6. Hidayat, S., Damanik, F., and Khayam, U. (2016, January 29–30). Electric field optimization on 150 kV GIS spacer by modification of spacer shape and conductor configuration. Proceedings of the 3rd Conference on Power Engineering and Renewable Energy, Yogyakarta, Indonesia.10.1109/ICPERE.2016.7904876 ↗
7. Sustainable alternative for bisphenol a epoxy resin high-performance and recyclable lignin-based epoxy vitrimers10.1016/j.indcrop.2021.113583 ↗
8. Manufacturing and Mechanical Properties of Epoxy Fibers Spinning using Anhydride and Amine Hardeners10.7234/composres.2016.29.6.408 ↗
9. A comprehensive study on the oxidative pyrolysis of epoxy resin from fiber/epoxy composites: Product characteristics and kinetics10.1016/j.jhazmat.2021.125329 ↗
10. Fracture behavior and fracture toughness of particulate filled epoxy composites10.1016/0167-577X(95)00254-5 ↗
11. Trends of Injection Molding Technology
12. Recent advances in bio-based epoxy resins and bio-based epoxy curing agents10.1002/app.44103 ↗
13. Effects of nano-filler addition on partial discharge resistance and dielectric breakdown strength of Micro-Al 2 O 3 Epoxy composite10.1109/TDEI.2010.5492235 ↗
14. Toughening of petroleum based (DGEBA) epoxy resins with various renewable resources based flexible chains for high performance applications: A review10.1021/acs.iecr.7b04495 ↗
15. Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil10.1016/j.msea.2004.01.002 ↗
16. New soybean oil–styrene–divinylbenzene thermosetting copolymers. V. shape memory effect10.1002/app.10493 ↗
17. Cure and thermal decomposition kinetics of a DGEBA/amine system modified with epoxidized soybean oil10.1007/s10973-020-10159-2 ↗
18. Epoxidized soybean oil-based epoxy blend cured with anhydride-based cross-linker: Thermal and mechanical characterization10.1021/acs.iecr.6b03879 ↗
19. Hybrid bio-based composites from blends of epoxy and soybean oil resins reinforced with jute woven fabrics10.1088/2053-1591/ab6892 ↗
20. Anhydride Cured Bio-Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties10.1002/mame.201900031 ↗
21. Polymers from triglyceride oils10.1016/j.progpolymsci.2006.07.001 ↗
22. Development of vegetable-oil-based polymers10.1002/app.40787 ↗
23. Thermosetting polymers from renewable sources10.1002/pi.6132 ↗
24. Mais, G., and Hedrich, W. (1997, January 25). New develolpments for vacuum preparation and casting according to the automatic pressure gelation process at elevated temperatures. Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, Rosemont, IL, USA.
25. Longzhi, Z., Binghui, C., Min, Y., and Shangbing, Z. (2010, January 26–28). Application of Moldflow software in design of injection mold. Proceedings of the 2010 International Conference on Mechanic Automation and Control Engineering, Wuhan, China.10.1109/MACE.2010.5535705 ↗
26. Li, Y., Zhong, C., Li, C., Jiang, R., Lu, J., and Sun, R. (2022, January 13–16). Mold Flow Simulation Analysis of Molded Underfill in an Ultra-thin High-Density Package. Proceedings of the 2022 IEEE 5th International Conference on Electronics Technology (ICET), Chengdu, China.10.1109/ICET55676.2022.9824202 ↗
27. Sinapius, M., and Ziegmann, G. (2021). Acting Principles of Nano-Scaled Matrix Additives for Composite Structures, Springer International Publishing.10.1007/978-3-030-68523-2 ↗
28. Modeling and Simulation of the Curing Process of Epoxy Resins using Finite Elements10.1007/s00161-018-0708-9 ↗
29. A novel cure reaction model fitting technique based on DSC scans
30. Determination and modelling of the cure shrinkage of epoxy vinyl ester resin and associated composites by considering thermal gradients10.1016/j.compscitech.2012.09.018 ↗
31. The measurement of the crystallinity of polymers by DSC10.1016/S0032-3861(02)00235-5 ↗
32. Cruz-Cruz, I., Ramírez-Herrera, C.A., Martínez-Romero, O., Olvera-Trejo, D., Elías-Zúñiga, A., Castillo-Márquez, S.A., and Jiménez-Cedeño, I.H. (2022). Influence of Epoxy Resin Curing Kinetics on the Mechanical Properties of Carbon Fiber Composites. Polymers, 14.10.3390/polym14061100 ↗
33. Non-isothermal DSC curing kinetics study of silicone-modified epoxy/ABS/GO nanocomposite10.1002/pc.26656 ↗
34. Investigation of DSC curing kinetic model fitting and rheological behavior of urushiol/IPDI system10.1016/j.tca.2022.179210 ↗
35. Cure kinetics and viscosity modelling of a high-performance epoxy resin film10.1016/j.polymertesting.2012.09.011 ↗
36. Zeng, Y.-J., Hwang, S.-J., Liu, Y.-D., and Huang, C.-S. (2021). Mold Flow Analysis of Motor Core Gluing with Viscous Flow Channels and Dipping Module. Polymers, 13.10.3390/polym13132186 ↗
37. Flow-Fiber Coupled Viscosity in Injection Molding Simulations of Short Fiber Reinforced Thermoplastics10.3139/217.3706 ↗
38. Identification of Cross-WLF Viscosity Model Parameters Using Optimization Technique
39. Creating Material Data for Thermoset Injection Molding Simulation Process10.1016/j.polymertesting.2018.11.042 ↗
40. Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites10.1016/j.prostr.2022.02.014 ↗
41. Fu, Y., Wang, C., Li, W., and Zhang, G. (2021, January 24–26). Research on Rheological Properties of Epoxy Casting Dielectric Functionally Graded Insulating Slurries and Thermal Expansion Characteristics of Composite Materials. Proceedings of the 16th Annual Conference of China Electrotechnical Society, Beijing, China.
42. In-situ constructing ultra-high-aspect-ratio core–shell nanostructures to achieve high-performance epoxy thermosets and their carbon fiber reinforced epoxy composites10.1016/j.cej.2022.137707 ↗
43. Polymer melting: Heating rate effects on DSC melting peaks10.1016/0040-6031(94)80023-5 ↗