Modeling and Distribution Identification of Instantaneous Cutting Energy Efficiency of Milling Cutter under Vibration
Source abstract
Abstract
The instantaneous cutting energy efficiency of a milling cutter is an important index to evaluate the cutting performance of the milling cutter. The existing models for cutting energy efficiency ignore the differences in the instantaneous cutting energy efficiency of each cutter tooth. In this work, according to the influence of milling vibration on instantaneous cutting posture and the input and output energy, a correlation model of the instantaneous cutting energy efficiency of a milling cutter and its cutter teeth was established. Using the cutting-force energy efficiency and the specific cutting energy and their distribution on the cutting edge of the cutter teeth, the dynamic relationship between the effective cutting energy transfer and conversion of the milling cutter was characterized. The instantaneous cutting-force energy efficiency and specific cutting energy were calculated. The formation of the dynamic distribution of the cutting energy efficiency was unveiled. Finally, an identification method for distributive variation in the instantaneous cutting energy efficiency of the milling cutter was proposed. The response of the distribution of the instantaneous cutting energy efficiency was studied and verified using experiments. The results showed that there was high similarity and good agreement between the calculated and measured results of the cutting energy efficiency of the milling cutter.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Energy Efficiency and Management · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China
Funding
National Natural Science Foundation of China · Nature Science Foundation of Heilongjiang Province, China
References (23)
Show source-provided references
1. Cutting Force Simulation in Milling with Multi-edges Cutter10.1063/1.5008117 ↗
2. Mathematical modeling of cutting layer geometry and cutting force in orthogonal turn-milling10.1016/j.jmatprotec.2020.116992 ↗
3. Slot milling of titanium alloy with hexagonal boron nitride and minimum quantity lubrication and multi-objective process optimization for energy efficiency10.1016/j.jclepro.2020.120739 ↗
4. A mechanistic model of energy consumption in milling10.1080/00207543.2017.1404160 ↗
5. Investigation on specific milling energy and energy efficiency in high-speed milling based on energy flow theory10.1016/j.energy.2019.116596 ↗
6. An effective thread milling force prediction model considering instantaneous cutting thickness based on the cylindrical thread milling simplified to side milling process10.1007/s00170-020-05919-1 ↗
7. A Prediction Model of Cutting Force about Ball End Milling for Sculptured Surface10.1155/2020/1389718 ↗
8. Calculation and Estimation of Surface Roughness and Energy Consumption in Milling of 6061 Alloy10.1155/2020/5687951 ↗
9. Jiang, B., Li, H.Y., Fan, L.L., and Zhao, P.Y. (2022). A Model for Energy Consumption of Main Cutting Force of High Energy Efficiency Milling Cutter under Vibration. Appl. Sci.-Basel, 12.10.3390/app12031531 ↗
10. New mechanistic cutting force model for milling additive manufactured Inconel 718 considering effects of tool wear evolution and actual tool geometry10.1016/j.jmapro.2020.12.042 ↗
11. Modified power prediction model based on infinitesimal cutting force during face milling process10.1007/s40684-018-0008-7 ↗
12. Energy efficiency state identification of milling processing based on EEMD-PCA-ICA10.1016/j.measurement.2021.109014 ↗
13. Energy Efficiency State Identification Based on Continuous Wavelet Transform—Fast Independent Component Analysis10.1115/1.4041568 ↗
14. Sustainable milling of Ti–6Al–4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment10.1016/j.jclepro.2020.125374 ↗
15. Zhou, M.H., Chen, Y.H., and Zhang, G.Q. (2020). Force Prediction and Cutting-Parameter Optimization in Micro-Milling Al7075-T6 Based on Response Surface Method. Micromachines, 11.10.3390/mi11080766 ↗
16. Energy consumption considering tool wear and optimization of cutting parameters in micro milling process10.1016/j.ijmecsci.2020.105628 ↗
17. Plodzien, M., Zylka, L., Sulkowicz, P., Zak, K., and Wojciechowski, S. (2021). High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude. Materials, 14.10.3390/ma14092196 ↗
18. Energy efficiency of milling machining: Component modeling and online optimization of cutting parameters10.1016/j.jclepro.2017.05.013 ↗
19. Specific cutting energy index (SCEI)-based process signature for high-performance milling of hardened steel10.1007/s00170-019-03381-2 ↗
20. The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method10.1016/j.cirpj.2020.11.006 ↗
21. An analytical model for predicting specific cutting energy in whirling milling process10.1016/j.jclepro.2019.118181 ↗
22. Energy consumption characteristics in finish hard milling10.1016/j.jmapro.2018.08.036 ↗
23. Jiang, B., Li, W.H., Zhao, P.Y., Fan, L.L., and Sun, M. (2022). Identification for friction behavior variation of the minor flank of square shoulder milling cutter under vibration. Appl. Sci.-Basel, 12.10.3390/app12084038 ↗