Investigation of the shrinkage defects of high ribs in extrusion processes with plane strain characteristics

1. Demir H, Gündüz S (2009) The effects of aging on machinability of 6061 aluminium alloy. Mater Des 30(5):1480–1483. https://doi.org/10.1016/j.matdes.2008.08.00710.1016/j.matdes.2008.08.007 ↗

2. Ezatpour H, Sabzevar MH, Sajjadi SA, Huang Y (2014) Investigation of work softening mechanisms and texture in a hot deformed 6061 aluminum alloy at high temperature. Mater Sci Eng: A 606:240–247. https://doi.org/10.1016/j.msea.2014.03.08610.1016/j.msea.2014.03.086 ↗

3. Santos MC, Machado AR, Sales WF, Barrozo MA, Ezugwu EO (2016) Machining of aluminum alloys: a review. Int J Adv Manuf Technol 86:3067–3080. https://doi.org/10.1007/s00170-016-8431-910.1007/s00170-016-8431-9 ↗

4. Zhang W, Xu J (2022) Advanced lightweight materials for automobiles: a review. Mater Des 110994:110994. https://doi.org/10.1016/j.matdes.2022.11099410.1016/j.matdes.2022.110994 ↗

5. Yifan Z, Shuai Y (2021) How will the developing automotive wheel hub industry face future challenges? Automobiles and Accessories(in Chinese), no. 23, pp. 60–61, [Online]. Available: https://kns.cnki.net/kcms2/article/abstract?v=yqeyU9EK6jQUsFa__oNmsf66mgvYEYfwbhL1JOUi1_BbQhTKF5EOJP2f5d1_bCEK1sgwj9FydNX56H2yeq8nKyNMFiR2VRvNZjMSbbKln3NSHDGFQKNtaNI3WepfSpYxBA4EKNmIjmXaicKdlNQ-sA==anduniplatform=NZKPTandlanguage=CHS. Accessed 20 Dec 2021

6. Ou J et al (2020) Advanced process simulation of low pressure die cast A356 aluminum automotive wheels—Part II modeling methodology and validation. Metals 10(11):1418. https://doi.org/10.3390/met1011141810.3390/met10111418 ↗

7. Ou J et al (2020) Advanced process simulation of low pressure die cast A356 aluminum automotive wheels—part I, process characterization. Metals 10(5):563. https://doi.org/10.3390/met1005056310.3390/met10050563 ↗

8. Zhang B, Cockcroft S, Maijer D, Zhu J, Phillion A (2005) Casting defects in low-pressure die-cast aluminum alloy wheels. Jom 57:36–43. https://doi.org/10.1007/s11837-005-0025-110.1007/s11837-005-0025-1 ↗

9. Li J, Sun Y, Wang Y, Zhang L, Sun J (2023) Research on the squeeze casting process of large wheel hub based on FEM and RSM. Int J Adv Manuf Technol 128:1–2. https://doi.org/10.1007/s00170-023-11740-310.1007/s00170-023-11740-3 ↗

10. Luo AA, Sachdev AK, Apelian D (2022) Alloy development and process innovations for light metals casting. J Mater Process Technol 306:117606. https://doi.org/10.1016/j.jmatprotec.2022.11760610.1016/j.jmatprotec.2022.117606 ↗

11. Behrens B-A, Doege E, Reinsch S, Telkamp K, Daehndel H, Specker A (2007) Precision forging processes for high-duty automotive components. J Mater Process Technol 185:1–3. https://doi.org/10.1016/j.jmatprotec.2006.03.13210.1016/j.jmatprotec.2006.03.132 ↗

12. Kim Y, Ryou T, Choi H, Hwang B (2002) An analysis of the forging processes for 6061 aluminum-alloy wheels. J Mater Process Technol 123(2):270–276. https://doi.org/10.1016/S0924-0136(02)00087-010.1016/S0924-0136(02)00087-0 ↗

13. Babachenko OI, Domina KG, Kononenko GA, Khulin AN, Golovko ON, Ashkelianets AV (2017) The influence of initial blank parameters on railway wheels manufacture with hot plastic deformation process. Metallurgical & Mining Industry 6:25

14. Chen S, Shu X, Lu Y (2022) Effect of 6061 aluminum alloy wheel forging and spinning process parameters on forming quality. Metalurgija 61(2):317–320

15. Park J, Hwang H (2007) Preform design for precision forging of an asymmetric rib-web type component. J Mater Process Technol 187:595–599. https://doi.org/10.1016/j.jmatprotec.2006.11.03410.1016/j.jmatprotec.2006.11.034 ↗

16. Wang X, Li H, Sun P, Zhao G (2023) Design of a disc-type aluminum alloy automobile wheel hub forging process and analysis of microstructure and mechanical properties of forging. J Plast Eng 30(7):55–61

17. Han X, Hua L, Peng L, Feng W (2020) An innovative radial envelope forming method for manufacturing thin-walled cylindrical ring with inner web ribs. J Mater Process Technol 286:116836. https://doi.org/10.1016/j.jmatprotec.2020.11683610.1016/j.jmatprotec.2020.116836 ↗

18. Yao Y, Fan X, Wang L, Zhan M, Bai D (2024) Innovative local shear forming method for enhanced formability of tubular parts with high stiffened ribs. J Mater Process Technol 327:118380. https://doi.org/10.1016/j.jmatprotec.2024.11838010.1016/j.jmatprotec.2024.118380 ↗

19. Ohashi T, Tabatabei HM, Nishihara T (2017) Rib-structures on A5083 aluminum alloy sheet generated by Friction stir forming. Procedia Eng 207:1153–1158. https://doi.org/10.1016/j.proeng.2017.10.114110.1016/j.proeng.2017.10.1141 ↗

20. Feng W, Zhao P (2024) Buckling defect optimization of constrained ring rolling of thin-walled conical rings with inner high ribs combining response surface method with FEM. Metals 14(4):378. https://doi.org/10.3390/met1404037810.3390/met14040378 ↗

21. Zhe C, Zhang Z, Yong X (2023) Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs. Chin J Aeronaut 36(5):582–594. https://doi.org/10.1016/j.cja.2023.03.02710.1016/j.cja.2023.03.027 ↗

22. Lin H, Duanyang T, Xinghui H (2023) Modelling and analysis of metal flowing behaviors in constraining ring rolling of tapered ring with thin wall and three high ribs. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2023.04.01110.1016/j.cja.2023.04.011 ↗

23. Valberg HS, Lefstad M, de Moraes Costa AL (2020) On the mechanism of formation of back-end defects in the extrusion process. Procedia Manuf 47:245–252. https://doi.org/10.1016/j.promfg.2020.04.20710.1016/j.promfg.2020.04.207 ↗

24. Johnson W (1957) The plane strain extrusion of short slugs. J Mech Phys Solids 5(3):202–214. https://doi.org/10.1016/0022-5096(57)90006-610.1016/0022-5096(57)90006-6 ↗

25. Johnson W (1959) An elementary consideration of some extrusion defects. Appl Sci Res, Sect A 8:52–60. https://doi.org/10.1007/BF0041173810.1007/BF00411738 ↗

26. Balasundar I, Raghu T (2010) Investigations on the extrusion defect–axial hole or funnel. Mater Des 31(6):2994–3001. https://doi.org/10.1016/j.matdes.2010.01.02710.1016/j.matdes.2010.01.027 ↗

27. Balasundar I, Raghu T (2013) On the die design for repetitive upsetting–extrusion (RUE) process. IntJ Mater Form 6:289–301. https://doi.org/10.1007/s12289-011-1086-z10.1007/s12289-011-1086-z ↗

28. Hrudkina N, Aliieva L, Abhari P, Markov O, E.-E. J. o LJ, Sukhovirska ET (2019) Investigating the process of shrinkage depression formation at the combined radial-backward extrusion of parts with a flange. Eastern-European J Enterp Technol 5(1):49–57. https://doi.org/10.15587/1729-4061.2019.17923210.15587/1729-4061.2019.179232 ↗

29. Gao P et al (2019) Prediction of the folding defect in die forging: a versatile approach for three typical types of folding defects. J Manuf Process 39:181–191. https://doi.org/10.1016/j.jmapro.2019.02.02710.1016/j.jmapro.2019.02.027 ↗

30. Gao P, Yan X, Fei M, Zhan M, Li Y (2019) Formation mechanisms and rules of typical types of folding defects during die forging. Int J Adv Manuf Technol 104:1603–1612. https://doi.org/10.1007/s00170-019-04145-810.1007/s00170-019-04145-8 ↗

31. Johnson W, Sowerby R, Venter RD (1982) Plane-strain slip-line fields for metal-deformation processes, Pergamon Press, New York, p 364

32. Wang Z, Guan T (1989) Metal plastic forming theory (in Chinese). Mechanical Industry Press (in chinese), Beijing

33. Johnson W (1962) Some slip-line fields for swaging or expanding, indenting, extruding and machining for tools with curved dies. Int J Mech Sci 4(4):323–347. https://doi.org/10.1016/S0020-7403(62)80022-810.1016/S0020-7403(62)80022-8 ↗

34. Sowerby R, Johnson W (1974) Prediction of earing in cups drawn from anisotropic sheet using slip-line field theory. J Strain Anal 9(2):102–108. https://doi.org/10.1243/03093247V09210210.1243/03093247V092102 ↗

35. Sofuoglu H, Rasty J (1999) On the measurement of friction coefficient utilizing the ring compression test. Tribol Int 32(6):327–335. https://doi.org/10.1016/S0301-679X(99)00055-910.1016/S0301-679X(99)00055-9 ↗

36. Tai Q, Li X, Li Z, Liu Y, Zhu Y, Zeng W (2011) On the measurement of friction coefficient of Ti-6Al-4V titanium alloy utilizing the hot compression test of ring and FE simulation. J Mater Eng 1(6):23–26. https://doi.org/10.3969/j.issn.1001-4381.2013.06.00110.3969/j.issn.1001-4381.2013.06.001 ↗

37. Sahin M, Çetinarslan CS, Akata HE (2007) Effect of surface roughness on friction coefficients during upsetting processes for different materials. Mater Des 28(2):633–640. https://doi.org/10.1016/j.matdes.2005.07.01910.1016/j.matdes.2005.07.019 ↗