journal article·2023-07-18Open access

Automatic Assembly Technology of Dense Small Screws for Flat Panel Parts

Rui Wang, Xiangyu Guo, Songmo Li

Applied Sciences· Volume 13· Issue 14

Abstract

Screw assemblies of radar are characterized by numerous densely distributed small screws of various types, rendering their manual assembly difficult and inefficient. To improve the assembly quality and efficiency, an automatic assembly system was developed. First, the position and attitude relationships among the workpiece, camera, and base coordinate systems of the manipulator were obtained using three-point location and nine-point calibration methods. Second, a visual servoing strategy is designed for guiding the manipulator such that its position can be adjusted adaptively to achieve the high-precision positioning of threaded holes. Third, a method for evaluating assembly quality is developed. The templates of angle–torque curves of various screws were produced by fitting experimental data. Furthermore, the assembly quality was determined by calculating the similarity between the angle–torque curves and templates based on the Fréchet distance. Finally, the feasibility was verified using a flat plate component with five threaded holes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Robotic Mechanisms and Dynamics · Manufacturing Process and Optimization · Advanced Numerical Analysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Ocean Engineering, Harbin Institute of Technology, 2 Wenhuaxi Road, Weihai 264209, China

School of Mechatronics Engineering, Harbin Institute of Technology, 92 West Dazhi Street, Harbin 150001, China

Funding

National Natural Science Foundation of China

References (21)

Show source-provided references
1. Mechanical characterization and creep strengthening of AZ91 magnesium alloy by addition of yttrium oxide nanoparticles
2. Application of integrated manufacturing system of flexible production line in spacecraft manufacturing line10.1088/1742-6596/1549/3/032103 ↗
3. A review on significant technologies related to the robot-guided intelligent bolt assembly under complex or uncertain working conditions10.1109/ACCESS.2019.2941918 ↗
4. Fastener identification and assembly verification via machine vision10.1108/AA-08-2016-093 ↗
5. Matsuno, T., Huang, J., and Fukuda, T. (2013, January 6–10). Fault detection algorithm for external thread fastening by robotic manipulator using linear support vector machine classifier. Proceedings of the IEEE International Conference on Robotics and Automation, Karlsruhe, Germany.10.1109/ICRA.2013.6631058 ↗
6. A point and distance constraint based 6R robot calibration method through machine vision10.1016/j.rcim.2020.101959 ↗
7. A survey of automated threaded fastening10.1109/TASE.2018.2835382 ↗
8. A Noncontact Control Strategy for Circular Peg-in-Hole Assembly Guided by the 6-DOF Robot Based on Hybrid Vision
9. Automatic Assembly of Bolts and Nuts Based on Machine Vision Recognition10.1088/1742-6596/2113/1/012033 ↗
10. Pitipong, S., Pornjit, P., and Watcharin, P. (2010, January 21–22). An automated four-DOF robot screw fastening using visual servo. Proceedings of the 2010 IEEE/SICE International Symposium on System Integration, Sendai, Japan.10.1109/SII.2010.5708355 ↗
11. Hsue, A.W.J., and Tsai, C.F. (2020, January 13–16). Torque Controlled Mini-Screwdriver Station with A SCARA Robot and A Machine-Vision Guidance. Proceedings of the 2020 International Symposium on Computer, Consumer and Control (IS3C), Taichung City, Taiwan.10.1109/IS3C50286.2020.00127 ↗
12. Klingajay, M., Seneviratne, L.D., and Althoefer, K. (2003, January 27–31). Identification of threaded fastening parameters using the newton raphson method. Proceedings of the 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems, Las Vegas, NV, USA.
13. Moreira, G.R., Lahr, G.J., Boaventura, T., Savazzi, J.O., and Caurin, G.A. (2018, January 1–5). Online prediction of threading task failure using convolutional neural networks. Proceedings of the 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Madrid, Spain.10.1109/IROS.2018.8594501 ↗
14. Process curve analysis with machine learning on the example of screw fastening and press-in processes10.1016/j.procir.2020.05.220 ↗
15. Multi-source uncertainty considered assembly process quality control based on surrogate model and information entropy10.1007/s00158-018-2154-5 ↗
16. Chen, C., Huang, K., Li, D., Zhao, Z., and Jun, H. (2020). Multi-segmentation parallel CNN model for estimating assembly torque using surface electromyography signals. Sensors, 20.10.3390/s20154213 ↗
17. Machine learning models for predicting the compressive strength of concrete containing nano silica
18. Predicting elemental stiffness matrix of FG nanoplates using Gaussian Process Regression based surrogate model in framework of layerwise model10.1016/j.enganabound.2022.08.001 ↗
19. Chen, T., Lin, J., Wu, D., and Wu, H. (2021). Research of Calibration Method for Industrial Robot Based on Error Model of Position. Appl. Sci., 11.10.3390/app11031287 ↗
20. Umble, R.N., and Han, Z. (2014). Transformational Plane Geometry, CRC Press.10.1201/b17787 ↗
21. Eiter, T., and Mannila, H. (1994). Computing Discrete Fréchet Distance, CD-Laboratory for Expert Systems. Technical Report CD-TR 94/64.