Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets
Source abstract
Abstract
Continuous-bending-under-tension (CBT) has been conceived as a mechanical test or a forming process imparting cyclic bending during stretching of a metallic sheet or strip in order to increase its elongation to fracture (ETF) relative to simple tension (ST). In a recent work, over five times improved ETF by CBT over ST has been reported for a dual-phase (DP) steel DP 1180. This paper evaluates the behavior in CBT of three additional automotive advanced high strength steels (AHSS), DP 590, DP 780, and DP 980. In doing so, the process parameter space defined in terms of crosshead velocity applying the tensile force, and roller depth imposing the amount of bending to the specimen has been explored to maximize the ETF of these materials. The studied steel sheets had different thicknesses, in addition to intrinsically containing different fractions of ferrite and martensite phases. After establishing the optimal process parameters, significant improvements in ETF are achieved for all studied steels. Based on comprehensive data, it is found that lower martensitic content moderately improves ETF, while increasing of the sheet thickness rapidly deteriorates ETF, under CBT. The behavior in tension of sheets that were subjected to CBT processing under the established optimal process condition is investigated to determine enhancement in strength and any residual ductility of the materials. In addition to testing, a combination of electron microscopy along with electron-backscattered diffraction and neutron diffraction is employed in order to assess the initial microstructure, evolution of crystallographic texture, and fracture mechanisms for the studied steels. Texture evolution in CBT forms a more pronounced {011} fiber along the stretching direction than in ST, revealing that the deformation in CBT could extend to greater strain levels than those reached at the fracture location in ST. Fractured surfaces after CBT are found to consist of fine ductile dimples, while those after ST consist of coarser dimples and some content of brittle flat martensitic regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Ma B, Liu ZG, Jiang Z, Wu X, Diao K, Wan M (2016) Prediction of forming limit in DP590 steel sheet forming: an extended fracture criterion. Mater Des 96:401–40810.1016/j.matdes.2016.02.034 ↗
2. Hirsch J, Al-Samman T (2013) Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications. Acta Mater 61:818–84310.1016/j.actamat.2012.10.044 ↗
3. Bhargava M, Chakrabarty S, Barnwal VK, Tewari A, Mishra SK (2018) Effect of microstructure evolution during plastic deformation on the formability of transformation induced plasticity and Quenched & Partitioned AHSS. Mater Des 152:65–7710.1016/j.matdes.2018.04.068 ↗
4. Hirsch J (2014) Recent development in aluminium for automotive applications. Trans Nonferrous Metals Soc China 24:1995–200210.1016/S1003-6326(14)63305-7 ↗
5. Zarei H (2008) Experimental and numerical investigation of crash structures using aluminum alloys. Cuvillier Verlag, Göttingen, Germany
6. Bouaziz O, Zurob H, Huang M (2013) Driving force and logic of development of advanced high strength steels for automotive applications. Steel Res Int 84:937–94710.1002/srin.201200288 ↗
7. Knezevic M, Crapps J, Beyerlein IJ, Coughlin DR, Clarke KD, McCabe RJ (2016) Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements. Int J Mech Sci 105:227–23810.1016/j.ijmecsci.2015.11.021 ↗
8. Jahedi M, McWilliams BA, Moy P, Knezevic M (2017) Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: influence on strain hardening and texture evolution. Acta Mater 131:221–23210.1016/j.actamat.2017.03.075 ↗
9. Zecevic M, Knezevic M (2018) A new visco-plastic self-consistent formulation implicit in dislocation-based hardening within implicit finite elements: application to high strain rate and impact deformation of tantalum. Comput Methods Appl Mech Eng 341:888–91610.1016/j.cma.2018.07.027 ↗
10. Ardeljan M, Knezevic M (2018) Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses. Acta Mater 157:339–35410.1016/j.actamat.2018.07.045 ↗
11. Zecevic M, Knezevic M (2018) Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets. Int J Plast 105:141–16310.1016/j.ijplas.2018.02.007 ↗
12. Zecevic M, Knezevic M (2017) Modeling of sheet metal forming based on implicit embedding of the Elasto-plastic self-consistent formulation in Shell elements: application to cup drawing of AA6022-T4. JOM 69:922–92910.1007/s11837-017-2255-4 ↗
13. Zecevic M, Knezevic M (2019) An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements. Mech Mater 136:10306510.1016/j.mechmat.2019.103065 ↗
14. Zecevic M, Beyerlein IJ, Knezevic M (2017) Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: applications to compression, cyclic tension-compression, and bending to large strains. Int J Plast 93:187–21110.1016/j.ijplas.2016.07.016 ↗
15. Music O, Allwood J, Kawai K (2010) A review of the mechanics of metal spinning. J Mater Process Technol 210:3–2310.1016/j.jmatprotec.2009.08.021 ↗
16. Quigley E, Monaghan J (2000) Metal forming: an analysis of spinning processes. J Mater Process Technol 103:114–11910.1016/S0924-0136(00)00394-0 ↗
17. Wang L, Long H (2011) Investigation of material deformation in multi-pass conventional metal spinning. Mater Des 32:2891–289910.1016/j.matdes.2010.12.021 ↗
18. Emmens WC, van den Boogaard AH (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. J Mater Process Technol 209:3688–369510.1016/j.jmatprotec.2008.10.003 ↗
19. Eyckens P, Van Bael A, Van Houtte P (2009) Marciniak–Kuczynski type modelling of the effect of through-thickness shear on the forming limits of sheet metal. Int J Plast 25:2249–226810.1016/j.ijplas.2009.02.002 ↗
20. Allwood JM, Shouler DR (2009) Generalised forming limit diagrams showing increased forming limits with non-planar stress states. Int J Plast 25:1207–123010.1016/j.ijplas.2008.11.001 ↗
21. Yagami T, Manabe K, Miyamoto T (2009) Ductile fracture behavior of 5052 aluminum alloy sheet under cyclic plastic deformation at room temperature. J Mater Process Technol 209:1042–104710.1016/j.jmatprotec.2008.03.045 ↗
22. Swift H (1948) Plastic bending under tension. Engineering 166:333–359
23. Benedyk J, Parikh N, Stawarz D (1971) A method for increasing elongation values for ferrous and nonferrous sheet metals. J Mater 6:16–2910.1007/BF00550285 ↗
24. Schleich R, Held C, Sindel M, Liewald M (2009) Investigation on the effect of curvature and sheet thickness on forming limit prediction for aluminium sheet metal alloys. Int J Mater Form 2:41110.1007/s12289-009-0503-z ↗
25. Nine H (1978) Drawbead forces in sheet metal forming. Mechanics of Sheet Metal Forming. Springer, Boston, pp 179–21110.1007/978-1-4613-2880-3_8 ↗
26. Zecevic M, Roemer T, Knezevic M, Korkolis Y, Kinsey B (2016) Residual ductility and microstructural evolution in continuous-bending-under-tension of AA-6022-T4. Materials 9:13010.3390/ma9030130 ↗
27. Emmens WC, van den Boogaard AH (2009) Incremental forming by continuous bending under tension—an experimental investigation. J Mater Process Technol 209:5456–546310.1016/j.jmatprotec.2009.04.023 ↗
28. Calcagnotto M, Ponge D, Raabe D (2012) Microstructure control during fabrication of ultrafine grained dual-phase steel: characterization and effect of intercritical annealing parameters. ISIJ Int 52:874–88310.2355/isijinternational.52.874 ↗
29. Woo W, Em VT, Kim EY, Han SH, Han YS, Choi SH (2012) Stress–strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories. Acta Mater 60:6972–698110.1016/j.actamat.2012.08.054 ↗
30. Gong H, Wang S, Knysh P, Korkolis YP (2016) Experimental investigation of the mechanical response of laser-welded dissimilar blanks from advanced- and ultra-high-strength steels. Mater Des 90:1115–112310.1016/j.matdes.2015.11.057 ↗
31. Ghaei A, Green DE, Aryanpour A (2015) Springback simulation of advanced high strength steels considering nonlinear elastic unloading–reloading behavior. Mater Des 88:461–47010.1016/j.matdes.2015.09.012 ↗
32. Zecevic M, Upadhyay MV, Polatidis E, Panzner T, Van Swygenhoven H, Knezevic M (2019) A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation. Acta Mater 166:386–40110.1016/j.actamat.2018.12.060 ↗
33. Kudzal AD, McWilliams BA, Taggart-Scarff J, Knezevic M (2020) Fabrication of a low alloy ultra-high strength (>1500 MPa yield) steel using powder bed fusion additive manufacturing. Mater Sci Eng A 770:13851210.1016/j.msea.2019.138512 ↗
34. Calcagnotto M, Adachi Y, Ponge D, Raabe D (2011) Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging. Acta Mater 59:658–67010.1016/j.actamat.2010.10.002 ↗
35. Tasan CC, Hoefnagels JPM, Diehl M, Yan D, Roters F, Raabe D (2014) Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations. Int J Plast 63:198–21010.1016/j.ijplas.2014.06.004 ↗
36. Kapp M, Hebesberger T, Kolednik O (2011) A micro-level strain analysis of a high-strength dual-phase steel. Int J Mater Res 102:687–69110.3139/146.110522 ↗
37. Eghtesad A, Knezevic M (2020) High-performance full-field crystal plasticity with dislocation-based hardening and slip system back-stress laws: application to modeling deformation of dual-phase steels. J Mech Phys Solids 134:10375010.1016/j.jmps.2019.103750 ↗
38. Wagoner RH, Kim JH, Sung JH (2009) Formability of advanced high strength steels. Int J Mater Form 2:35910.1007/s12289-009-0644-0 ↗
39. Bhadeshia HKDH (2002) TRIP-assisted steels? ISIJ Int 42:1059–106010.2355/isijinternational.42.1059 ↗
40. Shi M, Gelisse S (2006) Issues on the AHSS forming limit determination. Proceedings of the IDDRG International Conference, Porto, pp 19–21
41. Nikhare C, Hodgson P, Weiss M (2011) Necking and fracture of advanced high strength steels. Mater Sci Eng A 528:3010–301310.1016/j.msea.2010.12.098 ↗
42. Saeidi N, Ashrafizadeh F, Niroumand B, Barlat F (2015) EBSD study of micromechanisms involved in high deformation ability of DP steels. Mater Des 87:130–13710.1016/j.matdes.2015.07.134 ↗
43. Xue X, Liao J, Vincze G, Sousa J, Barlat F, Gracio J (2016) Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel. Mater Des 90:204–21710.1016/j.matdes.2015.10.127 ↗
44. Barrett TJ, Knezevic M (2019) Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: experimental verification and sensitivity analysis. Comput Methods Appl Mech Eng 354:245–27010.1016/j.cma.2019.05.035 ↗
45. Sun X, Choi KS, Soulami A, Liu WN, Khaleel MA (2009) On key factors influencing ductile fractures of dual phase (DP) steels. Mater Sci Eng A 526:140–14910.1016/j.msea.2009.08.010 ↗
46. Sun X, Choi KS, Liu WN, Khaleel MA (2009) Predicting failure modes and ductility of dual phase steels using plastic strain localization. Int J Plast 25:1888–190910.1016/j.ijplas.2008.12.012 ↗
47. Gribbin S, Bicknell J, Jorgensen L, Tsukrov I, Knezevic M (2016) Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718. Int J Fatigue 93(Part 1):156–16710.1016/j.ijfatigue.2016.08.019 ↗
48. Gribbin S, Ghorbanpour S, Ferreri NC, Bicknell J, Tsukrov I, Knezevic M (2019) Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures. Mater Charact 149:184–19710.1016/j.matchar.2019.01.028 ↗
49. Smith DH, Bicknell J, Jorgensen L, Patterson BM, Cordes NL, Tsukrov I, Knezevic M (2016) Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718. Mater Charact 113:1–910.1016/j.matchar.2016.01.003 ↗
50. Ghorbanpour S, McWilliams BA, Knezevic M (2019) Effect of hot working and aging heat treatments on monotonic, cyclic, and fatigue behavior of WE43 magnesium alloy. Mater Sci Eng A 747:27–4110.1016/j.msea.2019.01.056 ↗
51. Ghorbanpour S, Zecevic M, Kumar A, Jahedi M, Bicknell J, Jorgensen L, Beyerlein IJ, Knezevic M (2017) A crystal plasticity model incorporating the effects of precipitates in superalloys: application to tensile, compressive, and cyclic deformation of Inconel 718. Int J Plast 99:162–18510.1016/j.ijplas.2017.09.006 ↗
52. Poulin CM, Korkolis YP, Kinsey BL, Knezevic M (2019) Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension. Mater Des 161:95–10510.1016/j.matdes.2018.11.022 ↗
53. Cantara AM, Zecevic M, Eghtesad A, Poulin CM, Knezevic M (2019) Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure. Int J Mech Sci 151:639–64910.1016/j.ijmecsci.2018.12.021 ↗
54. Zecevic M, Korkolis YP, Kuwabara T, Knezevic M (2016) Dual-phase steel sheets under cyclic tension–compression to large strains: experiments and crystal plasticity modeling. J Mech Phys Solids 96:65–8710.1016/j.jmps.2016.07.003 ↗
55. Holscher M, Raabe D, Lucke K (1994) Relationship between rolling textures and shear textures in F.C.C. and B.C.C. metals. Acta Metall Mater 42:879–88610.1016/0956-7151(94)90283-6 ↗
56. Kocks UF, Tomé CN, Wenk H-R (1998) Texture and anisotropy. Cambridge University Press, Cambridge
57. Bhattacharyya A, Knezevic M, Abouaf M (2015) Characterization of crystallographic texture and intra-grain morphology in cross-rolled tantalum. Metall Mater Trans A 46:1085–109610.1007/s11661-014-2686-2 ↗
58. Knezevic M, Zecevic M, Beyerlein IJ, Bhattacharyya A, McCabe RJ (2015) Predicting texture evolution in ta and ta-10W alloys using Polycrystal plasticity. JOM 67:2670–267410.1007/s11837-015-1613-3 ↗
59. Knezevic M, Beyerlein IJ, Lovato ML, Tomé CN, Richards AW, McCabe RJ (2014) A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: application to tantalum–tungsten alloys. Int J Plast 62:93–10410.1016/j.ijplas.2014.07.007 ↗
60. Knezevic M, Bhattacharyya A (2017) Characterization of microstructure in Nb rods processed by rolling: effect of grooved rolling die geometry on texture uniformity. Int J Refract Met Hard Mater 66:44–5110.1016/j.ijrmhm.2017.02.007 ↗
61. Knezevic M, Nizolek T, Ardeljan M, Beyerlein IJ, Mara NA, Pollock TM (2014) Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding. Int J Plast 57:16–2810.1016/j.ijplas.2014.01.008 ↗
62. Knezevic M, Landry NW (2015) Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics. Mech Mater 88:73–8610.1016/j.mechmat.2015.04.014 ↗
63. Barrett TJ, Eghtesad A, McCabe RJ, Clausen B, Brown DW, Vogel SC, Knezevic M (2019) A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations. Materialia 6:10032810.1016/j.mtla.2019.100328 ↗
64. Zecevic M, Knezevic M, Beyerlein IJ, Tomé CN (2015) An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: application to strain path changes in HCP metals. Mater Sci Eng A 638:262–27410.1016/j.msea.2015.04.066 ↗
65. Knezevic M, Beyerlein IJ, Brown DW, Sisneros TA, Tomé CN (2013) A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: application to beryllium. Int J Plast 49:185–19810.1016/j.ijplas.2013.03.008 ↗
66. Feather WG, Ghorbanpour S, Savage DJ, Ardeljan M, Jahedi M, McWilliams BA, Gupta N, Xiang C, Vogel SC, Knezevic M (2019) Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: experiments and multi-level crystal plasticity modeling. Int J Plast 120:180–20410.1016/j.ijplas.2019.04.019 ↗
67. Ardeljan M, Beyerlein IJ, McWilliams BA, Knezevic M (2016) Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: application to AZ31 magnesium alloy. Int J Plast 83:90–10910.1016/j.ijplas.2016.04.005 ↗
68. Benedyk DSJC, Parikh NM (1971) A method for increasing elongation values for ferrous and nonferrous sheet metals. J Mater
69. Emmens WC, van den Boogaard AH (2011) Cyclic stretch-bending: mechanics, stability and formability. J Mater Process Technol 211:1965–198110.1016/j.jmatprotec.2011.06.017 ↗
70. Roemer TJ, Barrett TJ, Knezevic M, Kinsey BL, Korkolis YP (2019) Experimental study of continuous-bending-under-tension of AA6022-T4. J Mater Process Technol 266:707–71410.1016/j.jmatprotec.2018.11.046 ↗
71. Emmens WC, Sebastiani G, van den Boogaard AH (2010) The technology of incremental sheet forming—a brief review of the history. J Mater Process Technol 210:981–99710.1016/j.jmatprotec.2010.02.014 ↗
72. Allwood JM, Shouler DR, Tekkaya AE (2007) The increased forming limits of incremental sheet forming processes. Key Eng Mater 344:621–62810.4028/www.scientific.net/KEM.344.621 ↗
73. Y. Huang, J. Cao, K. Smith, B. Woody, J. Ziegert, M. Li. Experimental and numerical investigation of forming limits in incremental forming of a conical cup. Transactions of the North American Manufacturing Research Institution of SME, 2008
74. Knezevic M, Poulin CM, Zheng X, Zheng S, Beyerlein IJ (2019) Strengthening of alloy AA6022-T4 by continuous bending under tension. Mater Sci Eng A 758:47–5510.1016/j.msea.2019.04.109 ↗
75. Wenk H-R, Lutterotti L, Vogel S (2003) Texture analysis with the new HIPPO TOF diffractometer. Nucl Instrum Meth A 515:575–58810.1016/j.nima.2003.05.001 ↗
76. Wenk H-R, Lutterotti L, Vogel S (2010) Rietveld texture analysis from TOF neutron diffraction data. Powder Diffract 25:283–29610.1154/1.3479004 ↗
77. Bachmann F, Hielscher R, Schaeben H (2010) Texture analysis with MTEX–free and open source software toolbox. Solid State Phenom 160:63–6810.4028/www.scientific.net/SSP.160.63 ↗
78. Hosford WF, Caddell RM (2011) Metal forming: mechanics and metallurgy. Cambridge University Press, New York10.1017/CBO9780511976940 ↗
79. Ghorbanpour S, McWilliams BA, Knezevic M (2019) Low-cycle fatigue behavior of rolled WE43-T5 magnesium alloy. Fatigue Fract Eng Mater Struct 42:1357–137210.1111/ffe.12992 ↗