Systematic Concept Study of Brayton Batteries for Coupled Generation of Electricity, Heat, and Cooling
Source abstract
Abstract
This study presents a systematic analysis of Brayton batteries using Ebsilon Professional® simulations. Over 200,000 concept configurations were evaluated, with less than 1% proving physically feasible. The research aimed to assess electricity generation; coupled generation of electricity and heat; coupled generation of electricity and cooling; and coupled generation of electricity, heat, and cooling, all with or without waste heat integration. Efficiency ranged from 20% to 50% for electricity generation alone, with higher efficiencies at a compressor discharge temperature of 625 °C compared to 450 °C. Co-generation improved the overall efficiency, although at the expense of power efficiency. Notably, simultaneous electricity, heat, and cooling generation solutions were absent within the study’s parameters. Lead concepts, predominantly air-based systems with or without charging line recuperators and heat exchange at various stages, were identified. These will undergo detailed dynamic system simulations, focusing on thermal energy storage. Comparison with the existing literature was limited due to differing parameters and topologies, highlighting the value of this systematic analysis in identifying optimal solutions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Hybrid Renewable Energy Systems · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Engineering Thermodynamics, German Aerospace Centre (DLR), 70569 Stuttgart, Germany
Funding
German Federal Ministry for Economic Affairs and Climate Action
References (40)
Show source-provided references
1. (2024, June 28). Carnot Batteries. Available online: https://iea-es.org/task-36/.
2. Progress and prospects of thermomechanical energy storage—A critical review10.1088/2516-1083/abdbba ↗
3. Carnot battery technology: A state-of-the-art review10.1016/j.est.2020.101756 ↗
4. Novotny, V., Basta, V., Smola, P., and Spale, J. (2022). Review of Carnot Battery Technology Commercial Development. Energies, 15.10.3390/en15020647 ↗
5. Weissenbach, B. (1979). Thermischer Kraftspeicher. (EP/0003980 A1), European Patent.
6. Ruer, J. (2008). Installation and Methods for Storing and Recovering Electrical Energy. (WO 2008 148962 A2), International Patent.
7. MacNaughten, J., and Howes, J.S. (2009). Energy Storage. (WO 2009 044139 A2), International Patent.
8. Levelised Cost of Storage for Pumped Heat Energy Storage in comparison with other energy storage technologies10.1016/j.enconman.2017.09.047 ↗
9. Laughlin, R.B., Larochelle, P., and Cizek, N. (2015). Systems and Methods for Energy Storage and Retrieval. (US 2015 0260463 A1), United States Patent.
10. Laughlin, R.B. (2016). Adiabatic Salt Energy Storage. (US 2016 0298455 A1), United States Patent.
11. McTigue, J.D., Farres-Antunez, P., Ellingwood, K., Neises, T., and White, A.J. (2019). Pumped Thermal Electricity Storage with Supercritical CO2 Cycles and Solar Heat Input, SolarPACES.10.1063/5.0032337 ↗
12. (2024, May 02). The GridScale Technology Explained|Stiesdal. Available online: https://www.stiesdal.com/storage/the-gridscale-technology-explained/.
13. Electricity Storage with a Solid Bed High Temperature Thermal Energy Storage System (HTTES)—A Methodical Approach to Improve the Pumped Thermal Grid Storage Concept
14. Thermodynamic analysis of pumped thermal electricity storage10.1016/j.applthermaleng.2012.03.030 ↗
15. Pumped thermal grid storage with heat exchange10.1063/1.4994054 ↗
16. Isothermal transcritical CO2 cycles with TES (thermal energy storage) for electricity storage10.1016/j.energy.2012.09.057 ↗
17. Thermodynamic Efficiency of Pumped Heat Electricity Storage10.1103/PhysRevLett.111.110602 ↗
18. Performance optimization and comparison of pumped thermal and pumped cryogenic electricity storage systems10.1016/j.energy.2016.03.053 ↗
19. Bortolotti, M. (2024, May 02). EASE/EERA European Energy Storage Technology Development Roadmap. Available online: https://www.eera-set.eu/component/attachments/?task=download&id=312.
20. Knödler, P. (2019). Thermo-Mechanical Investigations of Packed Beds for High Temperature Heat Storage: Continuum Modeling. Appl. Sci., 9.10.3390/app9122569 ↗
21. Performance response of packed-bed thermal storage to cycle duration perturbations10.1016/j.est.2018.08.016 ↗
22. Experimental and numerical investigation of a pilot-scale thermal oil packed bed thermal storage system for CSP power plant10.1016/j.solener.2014.03.019 ↗
23. Zunft, S., Krüger, M., Dreißigacker, V., Belik, S., Hahn, J., and Knödler, P. (2017). ADELE-ING: Engineering-Vorhaben für die Errichtung der ersten Demonstrationsanlage zur Adiabaten Druckluftspeichertechnik, Öffentlicher Schlussbericht; Deutsches Zentrum für Luft- und Raumfahrt e.V.
24. McTigue, J. (2016). Analysis and Optimisation of Thermal Energy Storage. [Ph.D. Thesis, University of Cambridge].
25. Adiabate Druckluftspeicher für die Elektrizitätsversorgung—Der ADELE-Wärmespeicher
26. Solar Salt—Pushing an old material for energy storage to a new limit10.1016/j.apenergy.2020.114535 ↗
27. Thermodynamic analysis and optimisation of a combined liquid air and pumped thermal energy storage cycle10.1016/j.est.2018.04.016 ↗
28. Performance and cost evaluation of an innovative Pumped Thermal Electricity Storage power system10.1016/j.energy.2017.07.066 ↗
29. Heat transfer fluid and material selection for an innovative Pumped Thermal Electricity Storage system10.1016/j.energy.2018.01.045 ↗
30. Thermodynamic analysis of a High Temperature Pumped Thermal Electricity Storage (HT-PTES) integrated with a parallel organic Rankine cycle (ORC)10.1016/j.enconman.2018.09.049 ↗
31. Wettstein, H.E. (2012, January 11–15). The Potential of GT Combined Cycles for Ultra High Efficiency. Proceedings of the ASME Turbo Expo 2012, Copenhagen, Denmark.10.1115/GT2012-68586 ↗
32. Seydel, C.G. (2014). Thermodynamische Auslegung und Potentialstudien von Heavy-Duty Gasturbinen für kombinierte Gas- und Dampfkraftwerke. [Ph.D. Thesis, Ruhr-Universität Bochum].
33. Zehner, P. (1980). Vier-Quadranten-Charakteristiken Mehrstufiger Axialer Turbinen, VDI-Verlag GmbH.
34. (2024, May 02). Agorameter. Available online: https://www.agora-energiewende.de/daten-tools/agorameter/chart/today/power_generation/29.01.2024/01.02.2024/hourly.
35. Sterner, M., and Stadler, I. (2017). Energiespeicher—Bedarf, Technologien, Integration, Springer Vieweg.10.1007/978-3-662-48893-5 ↗
36. Krystallas, P.-A. (2018). Technische, organisatorische und ökonomische Analyse der Fernkälte am Projekt Fernkälte München. [Ph.D. Thesis, Technische Universität München].
37. Eifler, W., Schlücker, E., Spicher, U., and Will, G. (2009). Küttner—Kolbenmaschinen, Vieweg+Teubner.
38. Demonstration system of pumped heat energy storage (PHES) and its round-trip efficiency10.1016/j.apenergy.2022.120580 ↗
39. CHESTER: Experimental prototype of a pumped thermal energy storage and management system with thermal integration10.1016/j.enconman.2024.118519 ↗
40. (2024, May 02). Malta: Our Solution. Available online: https://www.maltainc.com/solution/.