Design and Testing of a Measurement Device for High-Speed Bearing Evaluation
Source abstract
Abstract
The submitted article focuses on the proposal of a testing device for researching alternative methods of lubricating technical systems, specifically high-speed rolling bearings using lubricants containing nanoparticles. The aim of this research is to verify the functionality of the proposed technical device, whose main task is to ensure the measurement of the functional and operational characteristics of high-speed rolling bearings. The proposed technical device allows us to carry out a series of measurements, primarily for the purpose of selecting specific bearings and secondarily for the purpose of conducting technical diagnostic measurements. The results of these measurements are significant in the selection of suitable nano-particle additives for the lubrication of the tested bearings. The tests was carried out using speeds reaching 110,000 rpm. Methods of monitoring vibrational and acoustic diagnostics were chosen for the analysis of the operational processes of loaded technical systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering and Informatics, Faculty of Manufacturing Technologies with a Seat in Presov, Technical University of Kosice, Bayerova 1, 080 01 Presov, Slovakia
Department of Design and Monitoring of Technical Systems, Faculty of Manufacturing Technologies with a Seat in Presov, Technical University of Kosice, Bayerova 1, 080 01 Presov, Slovakia
Funding
Ministry of Education, Science, Research and Sport of the Slovak Republic
References (28)
Show source-provided references
1. Friction Modifier Additives10.1007/s11249-015-0589-z ↗
2. Operating characteristics of bearings with magnetic nanoparticles doped lubricant
3. Application of tribotechnical diagnostic methods in case of determination of coefficient of operational reliability of machine tools
4. Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles10.1016/j.triboint.2012.10.024 ↗
5. Preparation of Ni Nanoparticles and Evaluation of Their Tribological Performance as Potential Additives10.1115/1.1286152 ↗
6. Tribological behaviour of mineral and rapeseed oils containing iron particles10.1108/ILT-05-2013-0058 ↗
7. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants10.1016/j.wear.2007.11.013 ↗
8. A review on effect of addition of nano particles on tribological properties of lubricants
9. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives10.1016/j.wear.2006.08.021 ↗
10. Tribological behavior of nano TiO2 as an additive in base oil10.1016/j.wear.2013.01.037 ↗
11. Study on the structure and tribological properties of surface-modified Cu nanoparticles10.1016/S0025-5408(99)00150-6 ↗
12. Synthesis and characterization of highly stable dispersions of copper nanoparticles by a novel one-pot method10.1016/j.materresbull.2013.01.025 ↗
13. Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiC p/Gr p composites with graphite macroparticles10.1007/s00170-018-2866-0 ↗
14. Nanotribology of Diamond Films Studied by Atomic Force Microscopy10.1557/PROC-188-219 ↗
15. Nanotribology of a Kr monolayer: A Quartz-Crystal Microbalance Study of Atomic-Scale Friction10.1103/PhysRevLett.66.181 ↗
16. Tribochemistry and antiwear mechanism of organic–inorganic nanoparticles as lubricant additives10.1007/s11249-005-9002-7 ↗
17. Synthesis of In-Sn alloy nanoparticles by a solution dispersion method10.1039/B311611E ↗
18. Wireless device based on MEMS sensors and bluetooth low energy (LE/Smart) technology for diagnostics of mechatronic systems10.4028/www.scientific.net/AMM.460.13 ↗
19. Neutral and basic sulfonates10.1021/ie50533a060 ↗
20. Tribological properties of Al2O3 nanoparticles as lubricating oil additives10.1016/j.ceramint.2013.12.050 ↗
21. Theoretical analysis of journal bearing with nanolubricants
22. Iron and Bronze Powdered Based Materials for Bearings with Surface Modified with Solid Lubricant Nanoparticles10.2478/amm-2014-0041 ↗
23. Novel nano bearings constructed by physical adsorption10.1038/srep14539 ↗
24. The dynamics of molecular bearings10.1088/0957-4484/6/2/005 ↗
25. Trojanowska, J., Husar, J., Hrehova, S., and Knapcikova, L. (2023). Poka Yoke in Smart Production Systems with Pick-to-Light Implementation to Increase Efficiency. Appl. Sci., 13.10.20944/preprints202305.1829.v1 ↗
26. Gelatko, M., Hatala, M., Botko, F., Vandzura, R., Hajnya, J., Sajgalik, M., and Torok, J. (2023). Stress Relieving Heat Treatment of 316L Stainless Steel Made by Additive Manufacturing Process. Materials, 16.10.3390/ma16196461 ↗
27. Bozek, P., Krenicky, T., and Prajova, V. (2023). Digital Induction Motor Model Based on the Finite Element Method. Appl. Sci., 13.10.3390/app13085124 ↗
28. Duhancik, M., Coranic, T., Gaspar, S., and Lipovsky, V. (2022). Sensorless Control Analysis of Electric Motor Drives Based on High-Frequency Signal Injection and Its Simulation Verification. Actuators, 11.10.3390/act11110317 ↗