Springback prediction for a mechanical micro connector using CPFEM based numerical simulations
Source abstract
Abstract
The bending process of an industrial connector is considered and investigated via numerical simulation using a crystal plasticity finite element model (CPFEM). The process consists of sequentially bending a 0.1 mm thick copper-based alloy (CuBe2) with progressive tools into a miniature cylindrical connector of around 1 mm in diameter. The paper focuses on the prediction of springback through the influence of several key-parameters of the numerical simulations. The finite element characteristics, single crystal plasticity model features and the number of grains in the sheet thickness are investigated in order to highlight relevant and influential parameters in CPFEM based microforming process simulations. The influence of the elastic properties is analyzed and a modification of the Peirce-Asaro-Needleman single crystal hardening law is taken into account in order to improve the description of reverse strain path changes. Finally, the numerical results are discussed and compared to the springback measured during the industrial process of the cylindrical connector. It is demonstrated, through the very good agreement with the experimental results, that such approach can be useful to simulate industrial processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Qin Y (2010) Micro-manufacturing engineering and technology. Elsevier, Amsterdam, Boston
2. Geiger M, Kleiner M, Eckstein R, Tiesler N, Engel U (2001) Microforming. CIRP Ann Manuf Technol 50(2):445–46210.1016/S0007-8506(07)62991-6 ↗
3. Engel U, Eckstein R (2002) Microforming - from basic research to its realization. J Mater Process Technol 125–126:35–4410.1016/S0924-0136(02)00415-6 ↗
4. Vollertsen F, Hu Z, Niehoff HS, Theiler C (2004) State of the art in micro forming and investigations into micro deep drawing. J Mater Process Technol 151(1-3):70–7910.1016/j.jmatprotec.2004.04.266 ↗
5. Fu MW, Chan WL (2012) A review on the state-of-the-art microforming technologies. Int J Adv Manuf Technol 67:2411–243710.1007/s00170-012-4661-7 ↗
6. Geißdörfer S, Engel U, Geiger M (2006) FE-simulation of microforming processes applying a mesoscopic model. Int J Mach Tools Manuf 46(11):1222–122610.1016/j.ijmachtools.2006.01.019 ↗
7. Peng L, Liu F, Ni J, Lai X (2007) Size effects in thin sheet metal forming and its elastic-plastic constitutive model. Mater Des 28(5):1731–173610.1016/j.matdes.2006.02.011 ↗
8. Hansen N (1977) The effect of grain size and strain on the tensile flow stress of aluminium at room temperature. Acta Metall 25(8):863–86910.1016/0001-6160(77)90171-7 ↗
9. Kals TA, Eckstein R (2000) Miniaturization in sheet metal working. J Mater Process Technol 103(1):95–10110.1016/S0924-0136(00)00391-5 ↗
10. Weiss B, Gröger V, Khatibi G, Kotas A, Zimprich P, Stickler R, Zagar B (2002) Characterization of mechanical and thermal properties of thin Cu foils and wires. Sensors Actuators A Phys 99(1-2):172–18210.1016/S0924-4247(01)00877-9 ↗
11. Gau J-T, Principe C, Yu M (2007) Springback behavior of brass in micro sheet forming. J Mater Process Technol 191(1-3):7–1010.1016/j.jmatprotec.2007.03.035 ↗
12. Peirce D, Asaro RJ, Needleman A (1982) An analysis of nonuniform and localized deformation in ductile single crystals. Acta Metall 30(6):1087–111910.1016/0001-6160(82)90005-0 ↗
13. Roters F, Eisenlohr P, Hantcherli L, Tjahjanto D, Bieler T, Raabe D (2010) Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications. Acta Mater 58(4):1152–121110.1016/j.actamat.2009.10.058 ↗
14. Wang S, Zhuang W, Balint D, Lin J (2009) A virtual crystal plasticity simulation tool for micro-forming. Procedia Engineering 1(1):75–7810.1016/j.proeng.2009.06.020 ↗
15. Chen S, Liu X, Liu L (2015) Effects of grain size and heterogeneity on the mechanical behavior of foil rolling. Int J Mech Sci 100:226–23610.1016/j.ijmecsci.2015.07.003 ↗
16. Zhang H, Dong X (2015) Physically based crystal plasticity FEM including geometrically necessary dislocations: numerical implementation and applications in micro-forming. Comput Mater Sci 110:308–32010.1016/j.commatsci.2015.08.046 ↗
17. Qin Y, Ma Y, Harrison CS, Brockett A, Zhou M, Zhao J, Law F, Razali A, Smith R, Eguia J (2008) Development of a new machine system for the forming of micro-sheet products. Int J Mater Form 1(S1):475–47810.1007/s12289-008-0098-9 ↗
18. Liu J, Fu M, Lu J, Chan W (2011) Influence of size effect on the springback of sheet metal foils in micro-bending. Comput Mater Sci 50(9):2604–261410.1016/j.commatsci.2011.04.002 ↗
19. Gau J-T, Chen P-H, Gu H, Lee R-S (2013) The coupling influence of size effects and strain rates on the formability of austenitic stainless steel 304 foil. J Mater Process Technol 213(3):376–38210.1016/j.jmatprotec.2012.10.004 ↗
20. Diehl A, Engel U, Geiger M (2010) Influence of microstructure on the mechanical properties and the forming behaviour of very thin metal foils. Int J Adv Manuf Technol 47(1-4):53–6110.1007/s00170-008-1851-4 ↗
21. Diehl A, Engel U, Geiger M (2008) Mechanical properties and bending behaviour of metal foils. Proc Inst Mech Eng B J Eng Manuf 222(1):83–9110.1243/09544054JEM838 ↗
22. Adzima F, Balan T, Manach PY, Bonnet N, Tabourot L (2017) Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets. Int J Plast 94:171–19110.1016/j.ijplas.2016.06.003 ↗
23. Peirce D, Asaro RJ, Needleman A (1983) Material rate dependence and localized deformation in crystalline solids. Acta Metall 31(12):1951–197610.1016/0001-6160(83)90014-7 ↗
24. Balland P., Déprés C., Billard R., Tabourot L., Physically based kinematic hardening modelling of single crystal. AIP Conferences Series 1353 (2011) 91–9610.1063/1.3589497 ↗
25. Bonnet N (2007) Contribution à l’étude expérimentale et numérique du comportement des tôles d'épaisseur submillimétrique, PhD Thesis Arts et Métiers ParisTech. Metz France
26. Rice J (1971) Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity. AIP Conferences Series 19(6):433–455
27. Needleman A, Asaro R, Lemonds J, Peirce D (1985) Finite element analysis of crystalline solids. Comput Methods Appl Mech Eng 52(1-3):689–70810.1016/0045-7825(85)90014-3 ↗
28. Bron F, Besson J (2004) A yield function for anisotropic materials. Application to aluminum alloys. Int J Plast 20(4-5):937–96310.1016/j.ijplas.2003.06.001 ↗
29. Bron F, Besson J (2004) A yield function for anisotropic materials. Application to aluminum alloys. Int J Plast 20(4-5):937–96310.1016/j.ijplas.2003.06.001 ↗
30. Pham CH, Thuillier S, Manach PY (2015) 2D springback and twisting of ultra-thin stainless steel U-shaped parts. Steel Research International 86(8):861–86810.1002/srin.201400569 ↗
31. Thuillier S, Manach PY (2009) Comparison of the work-hardening of metallic sheets using tensile and shear strain paths. Int J Plast 25(5):733–75110.1016/j.ijplas.2008.07.002 ↗
32. Zang SL, Thuillier S, Le Port A, Manach PY (2011) Prediction of the anisotropy and hardening of metallic sheets in tension, simple shear and biaxial tension. Int J Mech Sci 53(5):338–34710.1016/j.ijmecsci.2011.02.003 ↗
33. Hibbitt D., Karlsson B., Sorensen P., ABAQUS: theory manual, Hibbitt, Karlsson & Sorensen (1992)
34. Jiang CP, Chen CC (2012) Grain size effect on the Springback behavior of the microtube in the press bending process. Mater Manuf Process 27(5):512–51810.1080/10426914.2011.593230 ↗
35. Tabourot L (2001) Vers une vision unifiée de la plasticité cristalline. Habilitation à Diriger des Recherches, Université de Savoie
36. Eggertsen P-A, Mattiasson K (2011) On the identification of kinematic hardening material parameters for accurate springback predictions. Int J Mater Form 4(2):103–12010.1007/s12289-010-1014-7 ↗
37. Morestin F, Boivin M (1996) On the necessity of taking into account the variation in the young modulus with plastic strain in elastic-plastic software. Nucl Eng Des 162(1):107–11610.1016/0029-5493(95)01123-4 ↗
38. Yoshida F, Uemori T, Fujiwara K (2002) Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. Int J Plast 18(5-6):633–65910.1016/S0749-6419(01)00049-3 ↗
39. Wagoner RH, Lim H, Lee MG (2013) Advances issues in springback. Int J Plast 45:3–2010.1016/j.ijplas.2012.08.006 ↗
40. Chalal H, Racz SG, Balan T (2012) Springback of thick sheet AHSS subject to bending under tension. Int J Mech Sci 59(1):104–11410.1016/j.ijmecsci.2012.03.011 ↗
41. Xu Z, Peng L, Bao E (2018) Size effect affected springback in micro/meso scale bending process: experiments and numerical modeling. J Mater Process Technol 252:407–42010.1016/j.jmatprotec.2017.08.040 ↗