Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method
Source abstract
Abstract
In this paper, the virtual fields method is applied to identify the constitutive parameters of the homogeneous yield function-based anisotropic hardening model. The procedure, previously developed for isotropic hardening law, is extended to the anisotropic case in this study. For validation purpose, a finite element model is developed to check the feasibility of the proposed methodology in retrieving the target constitutive parameters. The identification results are critically discussed. The suitability of this finite element model is also assessed with a view to future experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Barlat F et al (2011) An alternative to kinematic hardening in classical plasticity. Int J Plast 27(9):1309–132710.1016/j.ijplas.2011.03.003 ↗
2. Chaboche JL (1986) Time-independent constitutive theories for cyclic plasticity. Int J Plast 2(2):149–18810.1016/0749-6419(86)90010-0 ↗
3. Gutierrez-Urrutia I et al (2010) Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests. J Mater Sci 45(24):6604–661010.1007/s10853-010-4750-7 ↗
4. Banu M et al (2006) Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part. J Mater Process Technol 173(2):178–18410.1016/j.jmatprotec.2005.11.023 ↗
5. Lee MG et al (2005) Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications. Int J Plast 21(5):915–95310.1016/j.ijplas.2004.05.014 ↗
6. Prager W (1949) Recent developments in the mathematical theory of plasticity. J Appl Phys 20(3):235–24110.1063/1.1698348 ↗
7. Manopulo N, Barlat F, Hora P (2015) Isotropic to distortional hardening transition in metal plasticity. Int J Solids Struct 56–57(0):11–1910.1016/j.ijsolstr.2014.12.015 ↗
8. Lee JW, Lee MG, Barlat F (2012) Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction. Int J Plast 29(1):13–41
9. Choi JS et al (2015) Measurement and modeling of simple shear deformation under load reversal: application to advanced high strength steels. Int J Mech Sci 98(0):144–15610.1016/j.ijmecsci.2015.04.014 ↗
10. Güner A et al (2012) Characterization of anisotropy of sheet metals employing inhomogeneous strain fields for Yld2000-2D yield function. Int J Solids Struct 49(25):3517–352710.1016/j.ijsolstr.2012.05.001 ↗
11. Pierron F, Grediac M (2012) The virtual fields method: extracting constitutive mechanical parameters from full-field deformation measurements. The virtual fields method: extracting constitutive mechanical parameters from full-field deformation measurements. 1–51710.1007/978-1-4614-1824-5 ↗
12. Fu J, Pierron F, Ruiz PD (2013) Elastic stiffness characterization using three-dimensional full-field deformation obtained with optical coherence tomography and digital volume correlation. J Biomed Opt 18(12):12151210.1117/1.JBO.18.12.121512 ↗
13. Grédiac M, Pierron F (2006) Applying the virtual fields method to the identification of elasto-plastic constitutive parameters. Int J Plast 22(4):602–62710.1016/j.ijplas.2005.04.007 ↗
14. Kim JH et al (2012) Experimental characterization of rupture in human aortic aneurysms using a full-field measurement technique. Biomech Model Mechanobiol 11(6):841–85310.1007/s10237-011-0356-5 ↗
15. Pierron F, Zhavoronok S, Grédiac M (2000) Identification of the through-thickness properties of thick laminated tubes using the virtual fields method. Int J Solids Struct 37(32):4437–445310.1016/S0020-7683(99)00149-3 ↗
16. Kim JH et al (2014) Determination of anisotropic plastic constitutive parameters using the virtual fields method. Exp Mech 54(7):1189–120410.1007/s11340-014-9879-x ↗
17. Kim JH et al (2013) Characterization of the post-necking strain hardening behavior using the virtual fields method. Int J Solids Struct 50(24):3829–384210.1016/j.ijsolstr.2013.07.018 ↗
18. Barlat F et al (2003) Plane stress yield function for aluminum alloy sheets—part 1: theory. Int J Plast 19(9):1297–131910.1016/S0749-6419(02)00019-0 ↗
19. van Riel M, van den Boogaard AH (2007) Stress-strain responses for continuous orthogonal strain path changes with increasing sharpness. Scr Mater 57(5):381–38410.1016/j.scriptamat.2007.05.005 ↗
20. Barlat F et al (2014) Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels. Int J Plast 58:201–21810.1016/j.ijplas.2013.11.002 ↗