journal article·2024-11Open access

Straightforward identification of flow curve and yield locus parameters from three-point bending experiments

Christoph Hartmann, Lorenz Maier, Tianyou Liu, Roman Norz, Wolfram Volk

Abstract

Abstract Material testing and modeling is one of the cornerstones of virtual analysis of sheet metal forming processes. However, it is also becoming more and more relevant for incoming goods inspection, especially in view of the increasing amount of recycled material or frequent changes of suppliers, e.g. to provide workers, processes and/or process models with relevant information about a new batch of material. Efficient material testing and straight-forward test evaluation is essential for this. The flow curve and yield locus are central to describe the forming behavior of sheet metal materials. However, the parameters of the associated models are currently determined in various tests on different systems and with special sample geometries. The present work presents a methodology that allows the determination of a set of flow curve and yield locus parameters from three three-point bending tests only. The evaluation routine does not require finite element simulation and processes only the force-displacement information of the bending tests, which also places low demands on the measurement technology. The results were compared with a conventionally determined parameter set using a validation test, and the results are of reasonable quality, especially considering the minimal effort involved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Volk W, Groche P, Brosius A, Ghiotti A, Kinsey BL, Liewald M, Madej L, Min J, Yanagimoto J (2019) Models and modelling for process limits in metal forming. CIRP Ann 68(2):775–79810.1016/j.cirp.2019.05.007 ↗
2. Bruschi S, Altan T, Banabic D, Bariani P, Brosius A, Cao J, Ghiotti A, Khraisheh M, Merklein M, Tekkaya AE (2014) Testing and modelling of material behaviour and formability in sheet metal forming. CIRP Ann 63(2):727–74910.1016/j.cirp.2014.05.005 ↗
3. Hou Y, Myung D, Park J, Min J, Lee HR, El-Aty AA, Lee MG (2023) A review of characterization and modelling approaches for sheet metal forming of lightweight metallic materials. Mater 16:83610.3390/ma16020836 ↗
4. Fllice L, Fratini L, Micari F (2001) A simple experiment to characterize material formability in tube hydroforming. CIRP Ann 50(1):181–18410.1016/S0007-8506(07)62100-3 ↗
5. Güner A, Brosius A, Tekkaya AE (2009) Inverse parameter identification of sheet metals utilizing the distribution of field variable. Int J Mater Form 2(Suppl 1):455–45810.1007/s12289-009-0529-2 ↗
6. Cooreman S, Lecompte D, Sol H, Vantomme J, Debruyne D (2007) Elasto-plastic material parameter identification by inverse methods: Calculation of the sensitivity matrix. Int J Solids Struct 44(13):4329–434110.1016/j.ijsolstr.2006.11.024 ↗
7. Larour P, Hackl B, Leomann F, Benedyk K (2012) Bending angle calculation in the instrumented three-point bending test. IDDRG Conf C 2512
8. Kaupper M, Merklein M (2013) Bendability of advanced high strength steels—a new evaluation procedure. CIRP Ann 62(1):247–25010.1016/j.cirp.2013.03.049 ↗
9. Cheong K, Omer K, Butcher C, George R, Dykeman J (2017) Evaluation of the vda 238–100 tight radius bending test using digital image correlation strain measurement. J Phys Conf Ser 896:01207510.1088/1742-6596/896/1/012075 ↗
10. Alexandrov S, Lyamina E, Hwang YM (2021) Plastic bending at large strain: a review. Process 9:40610.3390/pr9030406 ↗
11. Dadras P, Majlessi SA (1982) Plastic bending of work hardening materials. J Eng Ind 104(3):224–23010.1115/1.3185823 ↗
12. Alexandrov S, Hoon KJ, Chung K, Jin KT (2005) An alternative approach to analy-sis of plane-strain pure bending at large strains. J Strain Anal Eng Des 41(5):397–41010.1243/03093247JSA154 ↗
13. Tan Z, Persson B, Magnusson C (1995) Plastic bending of anisotropic sheet metals. Int J Mech Sci 37(4):405–42110.1016/0020-7403(94)00069-V ↗
14. Chakrabarty J, Lee WB, Chan KC (2001) An exact solution for the elastic/plastic bending of anisotropic sheet metal under conditions of plane strain. Int J Mech Sci 43(8):1871–188010.1016/S0020-7403(01)00009-1 ↗
15. Alexandrov S, Manabe K, Furushima T (2011) A general analytic solution for plane strain bending under tension for strain-hardening material at large strains. Arch Appl Mech 81:1935–195210.1007/s00419-011-0529-9 ↗
16. Voce E (1955) A practical strain-hardening function. Metallurgia - Br J Met 51(307):219–226
17. Hill R (1950) The Mathematical Theory of Plasticity. Oxford University Press London
18. Hill R (1948) A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society London A 193(1033):281–29710.1098/rspa.1948.0045 ↗
19. Barlat F, Brem JC, Yoon JW, Chung K, Dick RE, Lege DJ, Pourboghrat F, Choi SH, Chu E (2003) Plane stress yield function for aluminium alloy sheets-part 1: theory. Int J Plast 19:1297–131910.1016/S0749-6419(02)00019-0 ↗
20. Nocedal J, Wright SJ (2006) Numerical Optimization (Springer Series in Operations Research). Springer, New York
21. Ciavarella M, Meneghetti G (2004) On fatigue limit in the presence of notches: classical vs. recent unified formulations. Int J Fatigue 26(3):289–29810.1016/S0142-1123(03)00106-3 ↗
22. Eder M, Gruber M, Volk W (2022) Validation of material models for sheet metals using new test equipment. Int J Mater Form 15(64):1–42
23. Maier L, Eder M, Norz R, Volk W (2023) Innovative experimental setup for the investigation of material models with regard to strain hardening behavior. IOP Confer-ence Series: Mater Sci Eng 1284:01207110.1088/1757-899X/1284/1/012071 ↗
24. Eder M (2023) Validierung Von Materialmodellen - Der MUC-Test Als Methodik zur Qualifizierung Von Materialmodellen Für Blechwerkstoffe (in German). Kollemosch Munich. Dissertation, Technical University of Munich
25. Swift HW (1952) Plastic instability under plane stress. J Mech Phys Solids 1(1):1–1810.1016/0022-5096(52)90002-1 ↗
26. Hockett JE, Sherby OD (1975) Large strain deformation of polycrystalline metals at low homologous temperatures. J Mech Phy Solids 23(2):87–9810.1016/0022-5096(75)90018-6 ↗