A strain rate dependent anisotropic hardening model and its validation through deep drawing experiments

1. Kuwabara T (2007) Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations. Int J Plasticity 23(3):385–41910.1016/j.ijplas.2006.06.003 ↗

2. Hill R (1948) A theory of the yielding and plastic flow of anisotropic metals. P Roy Soc Lond A Mat 193(1033):281–29710.1098/rspa.1948.0045 ↗

3. Hill R (1979) Theoretical plasticity of textured aggregates. Math Proc Cambridge 85(01):179–19110.1017/S0305004100055596 ↗

4. Hill R (1990) Constitutive modelling of orthotropic plasticity in sheet metals. J Mech Phys Solids 38(3):405–41710.1016/0022-5096(90)90006-P ↗

5. Barlat F, Lian K (1989) Plastic behavior and stretchability of sheet metals. Part I:A yield function for orthotropic sheets under plane stress conditions. Int J Plasticity 5(1):51–6610.1016/0749-6419(89)90019-3 ↗

6. Barlat F, Lege DJ, Brem JC (1991) A six-component yield function for anisotropic materials. Int J Plasticity 7(7):693–71210.1016/0749-6419(91)90052-Z ↗

7. Barlat F, Maeda Y, Chung K, Yanagawa M, Brem J, Hayashida Y, Lege D, Matsui K, Murtha S, Hattori S, Becker R, Makosey S (1997) Yield function development for aluminum alloy sheets. J Mech Phys Solids 45(1112):1727–176310.1016/S0022-5096(97)00034-3 ↗

8. Barlat F, Brem J, Yoon J, Chung K, Dick R, Lege D, Pourboghrat F, Choi SH, Chu E (2003) Plane stress yield function for aluminum alloy sheetsPart 1:theory. Int J Plasticity 19(9):1297–131910.1016/S0749-6419(02)00019-0 ↗

9. Banabic D, Kuwabara T, Balan T, Comsa D, Julean D (2003) Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions. Int J Mech Sci 45(5):797–81110.1016/S0020-7403(03)00139-5 ↗

10. Banabic D, Aretz H, Comsa D, Paraianu L (2005) An improved analytical description of orthotropy in metallic sheets. Int J Plasticity 21(3):493–51210.1016/j.ijplas.2004.04.003 ↗

11. Cazacu O, Plunkett B, Barlat F (2006) Orthotropic yield criterion for hexagonal closed packed metals. Int J Plasticity 22(7):1171–119410.1016/j.ijplas.2005.06.001 ↗

12. Chaboche J (1989) Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int J Plasticity 5(3):247–30210.1016/0749-6419(89)90015-6 ↗

13. Yoshida F, Uemori T, Fujiwara K (2002) Elasticplastic behavior of steel sheets under in-plane cyclic tensioncompression at large strain. Int J Plasticity 18(56):633–65910.1016/S0749-6419(01)00049-3 ↗

14. Aretz H (2008) A simple isotropic-distortional hardening model and its application in elasticplastic analysis of localized necking in orthotropic sheet metals. Int J Plasticity 24(9):1457–148010.1016/j.ijplas.2007.10.002 ↗

15. Barlat F, Gracio JJ, Lee MG, Rauch EF, Vincze G (2011) An alternative to kinematic hardening in classical plasticity. Int J Plasticity 27(9):1309–132710.1016/j.ijplas.2011.03.003 ↗

16. Hu W (2007) Constitutive modeling of orthotropic sheet metals by presenting hardening-induced anisotropy. Int J Plasticity 23(4):620–63910.1016/j.ijplas.2006.08.004 ↗

17. Lopes A, Barlat F, Gracio J, Ferreira Duarte J, Rauch E (2003) Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear. Int J Plasticity 19(1):1–2210.1016/S0749-6419(01)00016-X ↗

18. Hora P, Hochholdinger B, Mutrux A, Tong L (2009) Modeling of anisoptropic hardening behavior based on Barlat 2000 Yield Locus Description. In: Proceedings 3rd formation technical forum Zurich 2009 (Zu̇rich), Switzerland. Institute of Virtual Manufacturing, Zu̇rich, pp 21–29

19. Wang H, Wan M, Wu X, Yan Y (2009) The equivalent plastic strain-dependent yld2000-2d yield function and the experimental verification. Comp Mater Sci 47(1):12–2210.1016/j.commatsci.2009.06.008 ↗

20. Hershey A (1954) The elasticity of an isotropic aggregate of anisotropic cubic crystals. J Appl Mech 21(3):226–240

21. Hosford WF (1972) A generalized isotropic yield criterion. J Appl Mech 39(2):60710.1115/1.3422732 ↗

22. Logan RW, Hosford WF (1980) Upper-bound anisotropic yield locus calculations assuming 111-pencil glide. Int J Mech Sci 22(7):419–43010.1016/0020-7403(80)90011-9 ↗

23. Kuwabara T, Hashimoto K, Iizuka E, Yoon JW (2011) Effect of anisotropic yield functions on the accuracy of hole expansion simulations. J Mater Process Tech 211(3):475–48110.1016/j.jmatprotec.2010.10.025 ↗

24. Kuwabara T, Ikeda S, Kuroda K (1998) Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension. J Mater Process Tech 8081:517–52310.1016/S0924-0136(98)00155-1 ↗

25. Yoon JW, Barlat F, Dick RE, Chung K, Kang TJ (2004) Plane stress yield function for aluminum alloy sheetsPart II: FE formulation and its implementation. Int J Plasticity 20(3):495–52210.1016/S0749-6419(03)00099-8 ↗

26. Yoon JW, Yang DY, Chung K (1999) Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials. Comput Method Appl M 174(1-2):23–5610.1016/S0045-7825(98)00275-8 ↗

27. Portevin A, Le Chatelier F (1923) Sur un phnomne observ lors de l’essai de traction d’alliages en cours de transformation. CR Acad Sci Paris 176:507–510

28. Cowper G, Symonds P (1957) Strain hardening and strain rate 506 effects in the impact loading of the cantilever beams. Tech. rep., 28 Brown University, Division of Applied Mathematics, Providence, RI10.21236/AD0144762 ↗

29. Peters P, Leppin C, Hora P (2011) Method for the evaluation of the hydraulic bulge test. In: Proceedings IDDRG 2011, international deep drawing research group

30. Hockett JE, Sherby OD (1975) Large strain deformation of poly crystalline metals at low homologous temperatures. J Mech Phys 23:87–9810.1016/0022-5096(75)90018-6 ↗

31. Lingbeek RA, Meinders T, Rietman A (2008) Tool and blank interaction in the cross-die forming process. Int J Mater Form 1(1):161–16410.1007/s12289-008-0016-1 ↗

32. Niazi MS, Wisselink HH, Meinders T, Hutink J (2012) Failure predictions for DP steel cross-die test using anisotropic damage. Int J Damage Mech 21(5):713–75410.1177/1056789511407646 ↗