Influence of component design on extrusion processes in sheet-bulk metal forming
Source abstract
Abstract
Abstract Nowadays, the functional integration of workpieces challenges existing forming processes. The combination of established forming processes – like sheet metal and bulk forming – offers the possibility to counter this issue. The application of bulk forming operations on sheet metal semi-finished products, also called sheet-bulk metal forming (SBMF), is an innovative approach. The potential of SBMF cannot be fully exploited, as there are no recommendations in terms of workpiece design and layout influence on the process result. Therefore, this paper focuses on the analysis of semi-finished products and component design parameters on resulting part and process properties in two extrusion processes in SBMF. The investigation is based on a combined numerical and experimental approach. It is shown that the investigated design parameters, in addition to the achievable dimensional accuracy, substantially influence the occurring tool loads as well as the required process forces.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Ingarao G, Di Lorenzo R (2010) Design of Complex Sheet Metal Forming Processes: a new computer aided progressive approach. Int J Mater Form 3(1):21–2410.1007/s12289-010-0697-0 ↗
2. Gruber M et al (2014) Parameter identification of hardening laws for bulk metal forming using experimental and numerical approach. Int J Mater Form 9(1):21–3310.1007/s12289-014-1196-5 ↗
3. Röhner S., et al. Acquisition of design-relevant knowledge within the development of sheet-bulk metal forming. In: International Conference on Engineering Design ICED11, Dänemark, 2011. Technical University of Denmark, pp 108–120
4. Schaper M et al (2011) Sheet-bulk metal forming a new process for the production of sheet metal parts with functional components. MMI 3(7):53–58
5. Merklein M et al (2012) Bulk forming of sheet metal. CIRP Ann 61(2):725–74510.1016/j.cirp.2012.05.007 ↗
6. Can Y et al (2005) A study of lateral extrusion of gear like elements and splines. J Mater Process Technol 166(1):128–13410.1016/j.jmatprotec.2004.08.008 ↗
7. Damoulis GL et al (2010) New trends in sheet metal forming analysis and optimization trough the use of optical measurement technology to control springback. Int J Mater Form 3(1):29–3910.1007/s12289-009-0413-0 ↗
8. Gröbel D (2017) Herstellung von Nebenformelementen unterschiedlicher Geometrie an Blechen mittels Fließpressverfahren der Blechmassivumformung. Doctorial Thesis, FAU, Erlangen
9. Behrens BA (2004) Cold sizing of cold- and hot-formed gears. CIRP Ann 53(1):239–24210.1016/S0007-8506(07)60688-X ↗
10. Spitas V et al (2005) Increasing the strength of standard involute gear teeth with novel circular root fillet design. Am J Appl Sci 2(6):1058–106410.3844/ajassp.2005.1058.1064 ↗
11. Lange K et al. (2008) Fließpressen - wirtschaftliche Fertigung metallischer Präzisionswerkstücke. VDI, vol 3. Springer, Berlin
12. Behrens BA et al (2015) Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. Key Eng Mater 651-653:1153–115810.4028/www.scientific.net/KEM.651-653.1153 ↗
13. Vierzigmann U et al (2012) Material flow in sheet-bulk metal forming. Key Eng Mater 504-506:1035–104010.4028/www.scientific.net/KEM.504-506.1035 ↗
14. Schafstall H (1998) Verbesserung der Simulationsgenauigkeit ausgewählter Massivumformverfahren durch eine adaptive Reibwertvorgabe. Berichte aus der Fertigungstechnik. Shaker, Aachen
15. Bariani PF, Dal NT, Bruschi S (2004) Testing and modelling of material response to deformation in bulk metal forming. CIRP Ann 53(2):573–59510.1016/S0007-8506(07)60030-4 ↗
16. DIN Deutsches Institut für Normung e.V. (2016) DIN 50106 - Prüfung metallischer Werkstoffe – Druckversuch bei Raumtemperatur
17. Mori K, Nakano T (2015) State-of-the-art of plate forging in Japan. Prod Eng 10(1):81–9110.1007/s11740-015-0648-1 ↗
18. Löffler M., et al. Identification of tribological mechanisms of shot peened steel surfaces for an application in sheet-bulk metal forming. In: 13th International Conference on Shot Peening, 2017. Martin Levesque, pp 68–73
19. Siebertz K et al (2010) Statistische Versuchsplanung - Design of Experiments (DoE), vol 1. Springer, Berlin Heidelberg10.1007/978-3-642-05493-8 ↗
20. Hense R et al (2014) High-feed milling of tailored surfaces for sheet-bulk metal forming tools. Prod Eng 9(2):215–22310.1007/s11740-014-0597-0 ↗
21. Vazquez V et al (2000) Tool life in cold forging - an example of design improvement to increase service life. J Mater Process Technol 98(1):90–9610.1016/S0924-0136(99)00309-X ↗
22. Engel U. Strength vs Load - A general concept to estimate and to improve the reliability of tools in metal forming. In: International Conference on Industrial Tools 1997. pp 43–50
23. Lange K et al (1992) Tool life and tool quality in bulk metal forming. CIRP Ann 41(2):667–67510.1016/S0007-8506(07)63253-3 ↗
24. Fereshteh-Saniee F et al (2004) Friction modelling for the physical simulation of the bulk metal forming processes. J Mater Process Technol 153:151–15610.1016/j.jmatprotec.2004.04.217 ↗
25. Schneider T et al (2014) Analysis of varying properties of semi-finished products in sheet-bulk metal forming of functional components. AIP 1567(1):930–933
26. Hetzner H et al (2011) Improved sheet bulk metal forming processes by local adjustment of Tribological properties. J Manuf Sci Eng 133(6):06101110.1115/1.4005313 ↗
27. German Cold Forging Group (GCFG) (2015) Study "Festigkeit von Werkzeugstählen für die Kaltmassivumformung". Erlangen
28. Gröbel D et al (2014) Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes. Proc Eng 81:401–40610.1016/j.proeng.2014.10.013 ↗