Show source-provided references
1. Development and Validation of an HPLC Method with Fluorescence Detection for the Determination of Fluorescent Whitening Agents Migrating from Plastic Beverage Cups
10.1080/19440049.2018.1459053 ↗2. Identification and Quantitation of Sorbitol-Based Nuclear Clarifying Agents Extracted from Common Laboratory and Consumer Plasticware Made of Polypropylene
10.1021/ac8005632 ↗3. (2011). European Commission Commission Regulation (EU). No 10/2011. Off. J. Eur. Union, No 10/2011.
4. Determination of Nucleating Agents in Plastic Materials by GC/MS after Microwave-Assisted Extraction with in Situ Microwave-Assisted Derivatization
10.1016/j.talanta.2014.04.022 ↗6. Quantification of PET Cyclic and Linear Oligomers in Teabags by a Validated LC-MS Method—In Silico Toxicity Assessment and Consumer’s Exposure
10.1016/j.foodchem.2020.126427 ↗7. Influence of a Sorbitol-Based Nucleating Agent Modified with Silsesquioxanes on the Non-Isothermal Crystallization of Isotactic Polypropylene
10.1002/app.40131 ↗8. Polypropylene-Based Composites Containing Sorbitol-Based Nucleating Agent and Siloxane-Silsesquioxane Resin
10.1002/app.43476 ↗11. Influence of Pre-Heating of Food Contact Polypropylene Cups on Its Physical Structure and on the Migration of Additives
10.1016/j.fpsl.2019.100305 ↗12. Dehouck, P., Tsochatzis, E., Lopes, J.A., Cizek-Stroh, A., Robouch, P., and Hoekstra, E. (2018). Determination of the Mass Fractions of PBT and PET Oligomers in Food Simulant D, Joint Research Centre.
13. Tsochatzis, E., Dehouck, P., Lopes, J.A., Emteborg, H., Robouch, P., and Hoekstra, E. (2019). Determination of PBT Cyclic Oligomers in and Migrated from Food Contact Materials, Joint Research Centre Publication Office of the European Commission.
14. Proficiency Test on the Determination of Polyethylene and Polybutylene Terephthalate Cyclic Oligomers in a Food Simulant
10.1016/j.fpsl.2019.100441 ↗15. Comite Europeen de Normalisation CEN (2004). 13130:2004, Materials and Articles in Contact with Foodstuffs, Comite Europeen de Normalisation. Part 1: Guide to Test Methods for the Specific Migration of Substances from Plastics to Food and Food Simulants and the Determination of Substances in Plastics and the Selection of Conditions of Exposure to Food Simulants.
16. Joint FAO/WHO Expert Committee of Food Additives (2006). Joint FAO/WHO Expert Committee of Food Additives. Combined Compendium of Food Additives Specifications: Analytical Methods, Test Procedures and Laboratory Solutions Used by and Referenced in the Food Additive Specifications, FAO.
17. Development and Validation of a Multi-Analyte GC-MS Method for the Determination of 84 Substances from Plastic Food Contact Materials
10.1007/s00216-020-02758-7 ↗18. European Commission (2013). Joint Research Centre Standard Operating Procedure for the Determination of Phthalates in Wine and Spirits, Institute for Reference Materials and Measurements. In-House Validated by the EC-JRC-IRMM.
19. European Commission (2017). Guidance Document on Analytical Quality Control and Method Validation Procedures for Pesticide Residues and Analysis in Food and Feed. SANTE/11813/2017, Directorate-General for Health and Food Safety.
10.21820/23987073.2017.2.4 ↗20. Development and Validation of a Fast Gas Chromatography Mass Spectrometry Method for the Quantification of Selected Non-Intentionally Added Substances and Polystyrene/Polyurethane Oligomers in Liquid Food Simulants
10.1016/j.aca.2020.07.018 ↗21. Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis (IUPAC Technical Report)
10.1351/pac200274050835 ↗24. Tsochatzis, E.D., Lopes, J.A., Holland, M.V., Reniero, F., Emons, H., and Guillou, C. (2019). Isolation, Characterization and Structural Elucidation of Polybutylene Terephthalate Cyclic Oligomers and Purity Assessment Using a 1H QNMR Method. Polymers, 11.
10.3390/polym11030464 ↗