Assessment of in-Plane Behavior of Metal Compressed Members with Equivalent Geometrical Imperfection

A new procedure was presented with the objective of proving that it is the generalization of current attempts in designing compressed members and structures which is able to solve cases where other authors have problems. It is the further development of the former methods published by Chladný, Baláž, Agüero et al., which are based on the shape of the elastic critical buckling mode of the structure. Chladný’s method was accepted by CEN/TC 250 working groups creating Eurocodes. Both current Eurocodes EN 1993-1-1:2005 and EN 1999-1-1:2007 in their clauses 5.3.2(11) enable applying the geometrical equivalent unique global and local initial (UGLI) imperfection. The imperfection has the shape of the elastic critical buckling mode with amplitude defined in 5.3.2(11). UGLI imperfection is an alternative to the global sway and local bow initial imperfections defined in 5.3.2(3) and to the imperfections described in the clause 5.3.2(6). The determination of the location and value of UGLI imperfection proved to be onerous by some authors, especially in cases of members with variable cross-sections or/and axial forces. The paper also provides for special cases a procedure to detect the critical cross-section along the member which is defined as the one in which the utilization factor obtains maximum values. The new approach is validated by the investigation of five complex structures made of steel and one made of aluminum alloy solved by other authors. Comparisons of the results with those of other authors and with the Geometrically and Materially Nonlinear Analysis with Imperfections (GMNIA) results showed very good agreements with negligible differences. The information concerning the differences between current Eurocodes EN 1993-1-1:2005 and EN 1999-1-1:2007 is provided. Working drafts of Eurocodes of new generation prEN 1993-1-1:2020 and prEN 1999-1-1:2020 are also commented on.