Metal-Printing Defined Thermo-Optic Tunable Sampled Apodized Waveguide Grating Wavelength Filter Based on Low Loss Fluorinated Polymer Material

In this work, thermo-optic (TO) lateral shift apodized sampled waveguide grating for 1550 nm wavelength is designed and fabricated by the metal-printing technique based on fluorinated epoxy-terminated polycarbonates (FBPA-PC EP) and fluorinated epoxy resin (FSU-8) materials. The optical characteristics and thermal stability of the FBPA-PC EP and FSU-8 materials are analyzed. To realize periodic wide-spectrum filtering and suppress the side-lobes of grating, a lateral shift apodized sampled waveguide grating is proposed. The 3 dB bandwidth and wavelength spacing can reach 4.8 nm and 9.7 nm. The side-lobe suppression ratio of proposed device can reach 22.6 dB, which is much better than traditional Bragg grating (6.1 dB). Driving electrical powers of 42.4 mW and 87.2 mW can produce blueshifts of 1.8 nm and 3.5 nm in the measured reflection spectrum, respectively. This device realizes the aim of multiple functions, including periodic filtering, wide-spectrum filtering, and high side-lobe suppression. The device is applicable of realizing signal processing and wavelength division multiplexing (WDM )systems.