Finite Element Modeling of Microstructural Changes in Hard Machining of SAE 8620
Source abstract
Abstract
Surface and subsurface microstructural characterization after machining operations is a topic of great interest for both academic and industrial research activities. This paper presents a newly developed finite element (FE) model able to describe microstructural evolution and dynamic recrystallization (DRX) during orthogonal hard machining of SAE 8620 steel. In particular, it predicts grain size and hardness variation by implementing a user subroutine involving a hardness-based flow stress and empirical models. The model is validated by comparing its output with the experimental results available in literature at varying the cutting speed, insert geometry and flank wear. The results show a good ability of the customized model to predict the thermo-mechanical and microstructural phenomena taking place during the selected processes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical, Energy and Management Engineering, University of Calabria, CS 87036 Rende, Italy
Department of Computer Engineering, Modeling, Electronics and Systems Engineering, University of Calabria, CS 87036 Rende, Italy
Department of Engineering for Innovation, University of Salento, Via per Monteroni, 73100 Lecce, Italy
References (26)
Show source-provided references
1. Optimization of Minimum Quantity Lubricant Conditions and Cutting Parameters in Hard Milling of AISI H13 Steel10.3390/app6030083 ↗
2. Surface Roughness Analysis in the Hard Milling of JIS SKD61 Alloy Steel10.3390/app6060172 ↗
3. Effect of Equal Channel Angular Pressing (ECAP) on Erosion-Corrosion of Pure Copper10.3390/app7121250 ↗
4. Application of an Adaptive “Neuro-Fuzzy” Inference System in Modeling Cutting Temperature during Hard Turning10.3390/app9183739 ↗
5. Johnson, G.R., and Cook, W.H. (1983). A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and Temperatures. Proc. Seventh Int. Symp. Ballist., 541–547.
6. A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti–6Al–4V10.1016/j.ijmachtools.2007.10.014 ↗
7. Childs, T.H.C., Maekawa, K., Obikawa, T., and Yamane, Y. (2000). Metal. Machining: Theory and Applications, Elsevier.
8. Validation of Finite Element Cutting Force Prediction for End Milling10.1016/j.procir.2012.05.019 ↗
9. Dislocation Mechanics-based Constitutive Equations10.1007/s11661-004-0201-x ↗
10. Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and its Application in Hard Machining Simulations10.1115/1.2193549 ↗
11. A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable
12. A Study of Energy Dissipating Mechanisms in Orthogonal Cutting of UD-CFRP Composites10.1016/j.compstruct.2019.03.090 ↗
13. A Modified Johnson—Cook Model for Tensile Behaviors of Typical Hign—Strength Alloy Stell10.1016/j.msea.2010.07.061 ↗
14. D. Prediction of Machining Induced Residual Stresses in Turning of Titanium and Nickel Based Alloys with Experiments and Finite Element Simulations10.1016/j.cirp.2012.03.100 ↗
15. A Modified Johnson-Cook Model of as-Quenched AA2219 Considering Negative to Positive Strain Rate Sensitivities over a Wide Temperature Range10.1016/j.proeng.2017.10.754 ↗
16. Fields–Backofen and a Modified Johnson-Cook Model for cp-ti at Ambient and Intermediate Temperature10.1016/S1875-5372(17)30170-4 ↗
17. A Modified Johnson–Cook Model for Tensile Flow Behaviors of 7050-T7451 Aluminum Alloy at High Strain Rates10.1016/j.msea.2015.02.010 ↗
18. Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature10.1016/j.msea.2013.05.062 ↗
19. Finite Element Modeling of Microstructural Changes in Dry and Cryogenic Cutting of Ti6Al4V Alloy10.1016/j.cirp.2014.03.074 ↗
20. Hardness-Based Flow Stress and Fracture Models for Numerical Simulation of Hard Machining AISI 52100 Bearing Steel10.1016/j.msea.2004.01.012 ↗
21. Finite Element Modeling of Microstructural Changes in Waspaloy Dry Machining10.1007/s00170-016-9037-y ↗
22. Influence of Tool Wear on Residual Stresses When Turning Inconel 71810.1016/j.procir.2016.02.359 ↗
23. Nanostructural Evolution of Hard Turning Layers in Response to Insert Geometry, Cutting Parameters and Material Microstructure10.1016/j.cirp.2013.03.090 ↗
24. Davis, J.R. (1998). Metals Handbook, ASM International. [2nd ed.].10.31399/asm.hb.mhde2.9781627081993 ↗
25. Heat treating for the competitive edge, Modern steels and their properties, Akron steel treating company.
26. Finite Element Modelling of Microstructural Changes in Dry and Cryogenic Machining AISI 52100 Steel10.1080/02670836.2015.1104085 ↗