journal article·2019-07-24Open access

A New Anti-Windup Compensator Based on Quantitative Feedback Theory for an Uncertain Linear System with Input Saturation

R. Jeyasenthil, Seung-Bok Choi

Applied Sciences· Volume 9· Issue 15

Abstract

This paper devotes to the robust stability problem for an uncertain linear time invariant (LTI) feedback system with actuator saturation nonlinearity. Based on a three degree of freedom (DOF) non-interfering control structure, the robust stability is enforced with the describing function (DF) approach for an uncertain LTI system to avoid the limit cycle. A new type of anti-windup (AW) compensator is designed using the quantitative feedback theory (QFT) graphical method, which results in a simple design procedure and low-order AW control system. One of the most significant benefits of the proposed method is free of the non-convexity (intractable) drawback of the linear matrix inequality (LMI)-based approach. The analysis conducted on the benchmark problem clearly reveals that the proposed QFT-based anti-windup design is able to handle both saturation and uncertainty in a very effective manner.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Stability and Control of Uncertain Systems · Adaptive Control of Nonlinear Systems · Control Systems and Identification

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Smart Structures and System Laboratory, Department of Mechanical Engineering, Inha University, Incheon 22212, Korea

References (18)

Show source-provided references
1. Design-Oriented Analysis of Quantization-Induced Limit Cycles in a Multiple-Sampled Digitally Controlled Buck Converter10.1109/TCSI.2013.2283671 ↗
2. Analysis of stability and bifurcations of limit cycles in Chua’s circuit through the harmonic-balance approach10.1109/81.780370 ↗
3. Computation of limit cycle via higher order harmonic balance approximation and its application to a 3-bus power system10.1109/TCSI.2002.802348 ↗
4. Influence of Jitter on Limit Cycles in Bang-Bang Clock and Data Recovery Circuits10.1109/TCSI.2015.2415174 ↗
5. Limit Cycles in a MEMS Oscillator
6. On Limit Cycles and the Describing Function Method in Periodically Switched Circuits10.1109/81.244905 ↗
7. Global Finite-Time Stabilization of Planar Linear Systems with Actuator Saturation
8. Multivariable anti-windup controller synthesis using linear matrix inequalities10.1016/S0005-1098(01)00075-9 ↗
9. A robust anti-windup design procedure for SISO systems10.1080/00207179.2011.552123 ↗
10. Incorporating Robustness Requirements into Anti-windup Design10.1109/TAC.2007.906185 ↗
11. On the Existence of Stable, Causal Multipliers for Systems with Slope-Restricted Nonlinearities10.1109/TAC.2009.2031581 ↗
12. Quantitative design of a class of nonlinear systems with parameter uncertainty10.1002/rnc.4590040108 ↗
13. A new view of anti-windup design for uncertain linear systems in the frequency domain10.1002/rnc.3397 ↗
14. A synthesis theory for a class of saturating systems10.1080/00207178308933067 ↗
15. A QFT framework for nonlinear robust stability10.1002/rnc.653 ↗
16. A QFT framework for anti-windup control systems design10.1115/1.4000812 ↗
17. A New QFT Design Methodology for Feedback Systems under Input Saturation10.1115/1.1367337 ↗
18. The input amplitude saturation problem in QFT: A survey10.1016/j.arcontrol.2011.03.002 ↗