Measurement of the Machined Surface Diameter by a Laser Triangulation Sensor and Optimalization of Turning Conditions Based on the Diameter Deviation and Tool Wear by GRA and ANOVA
Source abstract
Abstract
One of the most important operations in the technological production process is the inspection of the manufactured product. The gradual wear of the tool affects the achievement of the required quality of the functional surfaces. In this research, we present the results of measuring the diameter deviation with a new generation laser triangulation sensor (LTS). At the same time, we have performed parametric optimization of several multi-responses, such as insert wear on the VBB flank side of cutting edge and diameter deviation Δd for a C45 steel sample during dry turning and using a sintered carbide insert, using the method of grey relational analysis (GRA) in combination with the Taguchi L16 orthogonal array. The optimal setting of input factors for multi-response parameters is ap 4-f 4-vc 1 i.e., depth of cut 0.5 mm, feed 0.4 mm per revolution, and a cutting speed of 70 m/min. At the same time, we present an evaluation of the significance of input factors using the method ANOVA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Manufacturing Process and Optimization · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering and Informatics, Faculty of Manufacturing Technologies, Technical University of Košice, Bayerova 1, 08001 Prešov, Slovakia
Department of Automotive and Manufacturing Technologies, Faculty of Manufacturing Technologies, Technical University of Košice, Štúrova 31, 08001 Prešov, Slovakia
Department of Quantitative Methods and Managerial Informatics, University of Prešov, UNIPO, Konštantínová 16, 08001 Prešov, Slovakia
Funding
Slovak Research and Development Agency · Ministry of Education, Science, Research and Sport of the Slovak Republic
References (41)
Show source-provided references
1. Challenges, Opportunities and Future Directions of Smart Manufacturing: A State of Art Review10.1016/j.sftr.2020.100023 ↗
2. Significance of sensors for industry 4.0: Roles, capabilities, and applications10.1016/j.sintl.2021.100110 ↗
3. Li, X.-Q., Wang, Z., and Fu, L.-H. (2016). A Laser-Based Measuring System for Online Quality Control of Car Engine Block. Sensors, 16.10.3390/s16111877 ↗
4. Predictive model-based quality inspection using Machine Learning and Edge Cloud Computing10.1016/j.aei.2020.101101 ↗
5. Balestrieri, E., Daponte, P., De Vito, L., and Lamonaca, F. (2021). Sensors and Measurements for Unmanned Systems: An Overview. Sensors, 21.10.3390/s21041518 ↗
6. Yang, T., Wang, Z., Wu, Z., Li, X., Wang, L., and Liu, C. (2017). Calibration of Laser Beam Direction for Inner Diameter Measuring Device. Sensors, 17.10.3390/s17020294 ↗
7. Giganto, S., Martínez-Pellitero, S., Cuesta, E., Meana, V.M., and Barreiro, J. (2020). Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting. Sensors, 20.10.3390/s20113202 ↗
8. Plaza, E.G., López, P.J.N., and González, E.M.B. (2018). Multi-Sensor Data Fusion for Real-Time Surface Quality Control in Automated Machining Systems. Sensors, 18.10.3390/s18124381 ↗
9. Laser scanned patterns of machined surfaces10.1016/j.procir.2018.09.034 ↗
10. Surface roughness modeling in micro end-milling10.1007/s00170-017-1278-x ↗
11. Additive manufacturing: Scientific and technological challenges, market uptake and opportunities10.1016/j.mattod.2017.07.001 ↗
12. Additive manufacturing of biomaterials10.1016/j.pmatsci.2017.08.003 ↗
13. Chen, L., Liu, C., Li, Z., and Kang, Z. (2021). A New Triangulation Algorithm for Positioning Space Debris. Remote Sens., 13.10.3390/rs13234878 ↗
14. Selami, Y., Tao, W., Gao, Q., Yang, H., and Zhao, H. (2018). A Scheme for Enhancing Precision in 3-Dimensional Positioning for Non-Contact Measurement Systems Based on Laser Triangulation. Sensors, 18.10.3390/s18020504 ↗
15. Montavon, B., Dahlem, P., Peterek, M., Ohlenforst, M., and Schmitt, R.H. (2018). Modelling Machine Tools using Structure Integrated Sensors for Fast Calibration. J. Manuf. Mater. Process., 2.10.3390/jmmp2010014 ↗
16. Hardware-in-the-loop experiment of turning10.1016/j.procir.2018.08.179 ↗
17. A novel LiDAR sensor alignment inspection system for automobile productions using 1-D photodetector arrays10.1016/j.measurement.2021.109817 ↗
18. Multi-sensor measurement system for robotic drilling10.1016/j.rcim.2017.01.002 ↗
19. On-machine multi-directional laser displacement sensor using scanning exposure method for high-precision measurement of metal-works10.1016/j.precisioneng.2017.09.015 ↗
20. Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling10.1016/j.measurement.2018.07.058 ↗
21. Detection of accelerated tool wear in turning
22. Kossakowska, J., Bombiński, S., and Ejsmont, K. (2021). Analysis of the Suitability of Signal Features for Individual Sensor Types in the Diagnosis of Gradual Tool Wear in Turning. Energies, 14.10.3390/en14206489 ↗
23. Wang, Y., Bai, J., Huang, G., Zhou, Q., Wang, X., and Li, X. (2021). High precision roundness measurement with two chromatic confocal sensors. Optical Metrology and Inspection for Industrial Applications VIII, SPIE.10.1117/12.2602211 ↗
24. Zlámal, T., Mrkvica, I., Szotkowski, T., and Malotová, Š. (2019). The influence of surface treatment of PVD coating on its quality and wear resistant. Coatings, 9.10.3390/coatings9070439 ↗
25. Modification of Cutting Tools by Drag Finishing10.17973/MMSJ.2020_03_2019130 ↗
26. Control problems of grey systems10.1016/S0167-6911(82)80025-X ↗
27. Use of the Taguchi Method and Grey Relational Analysis to Optimize Turning Operations with Multiple Performance Characteristics10.1081/AMP-120029852 ↗
28. Sivalingam, V., Sun, J., Mahalingam, S.K., Nagarajan, L., Natarajan, Y., Salunkhe, S., Nasr, E.A., Davim, J.P., and Hussein, H.M.A.M. (2021). Optimization of Process Parameters for Turning Hastelloy X under Different Machining Environments Using Evolutionary Algorithms: A Comparative Study. Appl. Sci., 11.10.3390/app11209725 ↗
29. Pervez, M.N., Shafiq, F., Sarwar, Z., Jilani, M.M., and Cai, Y. (2018). Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis. Materials, 11.10.3390/ma11030426 ↗
30. Optimization of Roundness, MRR and Surface Roughness on Turning Process using Taguchi-GRA10.1088/1742-6596/1179/1/012099 ↗
31. Multi-response optimization of Ti-6Al-4V turning operations using Taguchi-based grey relational analysis coupled with kernel principal component analysis10.1007/s40436-019-00251-8 ↗
32. Chelladurai, S.J.S., Suresh Sharma, K., Kumar, G., and Kumar, M. (2021). Application of taguchi method coupled with GRA for optimization of drilling process parameters. IOP Conference Series: Materials Science and Engineering, Proceedings of the 3rd International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2020), Greater Noida, India, 7–8 April 2021, IOP Publishing Ltd.
33. Green Machining Characteristics Study of Al-6063 in CNC Milling Using Taguchi Method and Grey Relational Analysis10.1155/2021/4420250 ↗
34. Taguchi’s methodology of optimizing turning parameters over chip thickness ratio in machining P/M AMMC10.1007/s42452-019-0170-8 ↗
35. Sylajakumari, P.A., Ramakrishnasamy, R., and Palaniappan, G. (2018). Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite. Materials, 11.10.3390/ma11091743 ↗
36. Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis
37. Kilickap, E., Yardimeden, A., and Çelik, Y.H. (2017). Mathematical Modelling and Optimization of Cutting Force, Tool Wear and Surface Roughness by Using Artificial Neural Network and Response Surface Methodology in Milling of Ti-6242S. Appl. Sci., 7.10.3390/app7101064 ↗
38. Filipescu, A., Ionescu, D., Filipescu, A., Mincă, E., and Simion, G. (2021). Multifunctional Technology of Flexible Manufacturing on a Mechatronics Line with IRM and CAS, Ready for Industry 4.0. Processes, 9.10.3390/pr9050864 ↗
39. Wireless Device Based on MEMS Sensors and Bluetooth Low Energy (LE/Smart) Technology for Diagnostics of Mechatronic Systems10.4028/www.scientific.net/AMM.460.13 ↗
40. Židek, K., and Pitel, J. (2013, January 17). Smart 3D Pointing Device Based on MEMS Sensor and Bluetooth Low Energy. Proceedings of the 2013 IEEE Symposium Series on Computational Intelligence (SSCI), Singapore.10.1109/CICA.2013.6611686 ↗
41. Kuruc, M., Vopát, T., Peterka, J., Necpal, M., Šimna, V., Milde, J., and Jurina, F. (2022). The Influence of Cutting Parameters on Plastic Deformation and Chip Compression during the Turning of C45 Medium Carbon Steel and 62SiMnCr4 Tool Steel. Materials, 15.10.3390/ma15020585 ↗