Experimental Evaluation of Lubrication Characteristics of a New Type Oil-Film Bearing Oil Using Multi-Sensor System
Source abstract
Abstract
In order to evaluate the operating performance of a new type oil-film bearing oil S220, a new test bearing was designed based on oil-film bearing test rig. The operating temperature of S220 was tested through the thermocouples installed on a test bearing; the operating oil-film pressure was tested through pressure transducers; and the operating oil-film thickness was tested through displacement transducers. Meanwhile, M220 was also tested as a comparison, and both oils are based on mineral oil. The results showed that all property indexes of the test rig can meet the specified requirements and can guarantee the performance test of oil-film bearing oil; the operating temperature of S220 is generally equal to that of M220, and both have the same operating stability. The temperature property conforms to Formula (1) and the operating temperature under different load cases can be predicted. Although oil-film pressure of M220 is a little more stable, the oil-film pressure of S220 is similar to that of M220. Moreover, both have the similar oil-film thickness, and the oil-film thickness of S220 is slightly smaller than that of M220, especially at the beginning of operation. Ultimately, oil S220 is evaluated to be suitable for actual engineering application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Gear and Bearing Dynamics Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
Department of Electrical, Electronic & Computer Engineering, University of Pretoria, Pretoria 0002, South Africa
School of Mechatronic Engineering, China University of Mining Technology, Xuzhou 221116, China
School of Manufacturing & Mechanical Engineering, University of New South Wales (UNSW), Sydney 2200, Australia
References (31)
Show source-provided references
1. The developing of high speed wire and rod mill oil
2. Pressure distribution and damages of oil-film bearing sleeve during the process of interference fit10.3901/JME.2006.10.102 ↗
3. Influence of lubricants on plain bearing performance: Evaluation of bearing performance with polymer-containing oils10.1016/j.triboint.2011.03.009 ↗
4. Thermal, spectroscopic and rheological study of mineral base lubricating oils10.1007/s10973-006-7773-1 ↗
5. Li, X.W., and Su, J. (2011, January 16–18). The automobile engine lubricating oil monitor engineering research based on the near-infrared light method. Proceedings of the International Conference on Consumer Electronics, Communications and Networks (CECNet 2011), Xianning, China.
6. Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks10.1007/s10973-011-2176-3 ↗
7. Contaminants in used Oils and their problems10.1243/135065005X33955 ↗
8. Enhancing AW/EP property of lubricant oil by adding nano Al/Sn particles10.1007/s11249-004-1760-0 ↗
9. Sequential four-ball study of some lubricating oils
10. Gear power loss performance of biodegradable low-toxicity ester-based oils10.1243/13506501JET345 ↗
11. Design and development of hydrodynamic lubricating system of large-scale mill oil-film bearing test rig10.4028/www.scientific.net/AMR.145.274 ↗
12. Measurement of oil film pressure distribution in connecting rod bearing with test rig10.1080/10402009208982091 ↗
13. A new fluid film bearing test rig for oil and water bearings
14. Russian Lubricating Oils for Rolling Mills with Fluid-Friction Bearings10.1007/s11015-005-0054-6 ↗
15. Performance of lubricating oil film in aluminium foil rolling
16. Experimental comparison of the performance of a journal bearing with a single and a twin axial groove configuration10.1016/j.triboint.2012.04.026 ↗
17. Paper XI(ii) The influence of grooves in bearings on the stability and response of rotating systems10.1016/S0167-8922(08)70963-5 ↗
18. Experimental measurement of the friction torque on hydrodynamic plain journal bearings during start-up10.1016/j.triboint.2011.01.008 ↗
19. Simultaneous monitoring of oil film thickness and temperature in fluid film bearings10.1016/S0301-679X(01)00086-X ↗
20. Synthetic Lubricants in Hydrodynamic Journal Bearings: Experimental Results10.1007/s11249-011-9753-2 ↗
21. Ma, L. (2014). Optimization of the System Performance of Oil Film Bearing Test Bed. [Master’s Thesis, Taiyuan University Science Technology].
22. Viscosity monitoring and control on oil-film bearing lubrication with ferrofluids10.1016/j.triboint.2014.03.001 ↗
23. Theoretical and experimental investigation on the thermal characteristics of double-row tapered roller bearings of high speed locomotive10.1016/j.ijheatmasstransfer.2014.11.057 ↗
24. Experimental testing and thermal analysis of ball bearings10.1016/j.triboint.2012.10.009 ↗
25. A new fitting scattered data method based on the criterion of geometric distance10.1016/j.aasri.2014.05.007 ↗
26. An improved method of fitting experimental data to the Hoek–Brown failure criterion10.1016/j.enggeo.2011.12.011 ↗
27. Relative error prediction via kernel regression smoothers10.1016/j.jspi.2007.11.001 ↗
28. An Improved Time-Frequency Representation based on Nonlinear Mode Decomposition and Adaptive Optimal Kernel
29. Modeling of nonlinear system based on deep learning framework10.1007/s11071-015-2571-6 ↗
30. Electrical Anisotropic Response of Water Conducted Fractured Zone in the Mining Goaf10.1109/ACCESS.2016.2594187 ↗
31. Secure Two-party Distance Computation Protocol Based on Privacy Homomorphism and Scalar Product in Wireless Sensor Networks10.1109/TST.2016.7536716 ↗