Simulation of the Influence of Wing Angle Blades on the Performance of Counter-Rotating Axial Fan
Source abstract
Abstract
We took the mining counter-rotating fan FBD No.8.0 as the research object, used orthogonal test and numerical simulation to study the influence of wing angle blade on fan performance, and simulated and analyzed its aerodynamic noise. The results show that the pressure distribution of the optimal blade angle blade fan on the pressure surface of the secondary blade is stronger than that of the prototype blade, and the maximum pressure at the blade height of 25%, 50%, and 75% is increased by 2.3%, 9.3%, and 8.1%, respectively, than original blade. Compared with the prototype blade; wing angle blades can effectively reduce the generation of shedding vortices at the trailing edge of the blade, and reduce the strength of shedding vortices, so that the entropy production of the optimal wing angle blade fan is 1.55% lower than that of the prototype fan. Compared with the prototype fan, the full pressure and efficiency of the angle blade fan under the rated flow have increased by 7.24% and 1.76%, and the average increase of 11.32% and 3.88%, respectively, under the full flow condition. Compared with the prototype fan, the maximum sound power of the wing blade fan in the first and second blade trailing edge regions is reduced by 0.17% and 1.62%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Turbulent Flows · Heat Transfer Mechanisms · Aerodynamics and Acoustics in Jet Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
National-Local Joint Laboratory of Mining Fluid Control Engineering, Taiyuan 030024, China
Shanxi Research Center of Mining Fluid Control Engineering, Taiyuan 030024, China
Chongqing Vocational Institute of Engineering, Chongqing 402260, China
School of Design, South China University of Technology, Guangzhou 510006, China
Funding
Nature fund of Chongqing Science and Technology Bureau · Research plan projectof Chongqing Education Committee
References (26)
Show source-provided references
1. Optimization design for skew and sweep parameters of mine contra-rotation two-stage blades
2. Passive Noise Reduction for a Contrarotating Fan
3. Trailing Edge Perforation for Interaction Tonal Noise Reduction of a Contra-Rotating Fan10.1115/1.4038253 ↗
4. Effect of Hub-Ratio on Performance of Asymmetric Dual-Rotor Small Axial Fan10.4236/ojfd.2013.32A013 ↗
5. Effect of variation in axial spacing and rotor speed combinations on the performance of a high aspect ratio contra-rotating axial fan stage10.1177/0957650912467453 ↗
6. Study on aerodynamic performance of the bionic airfoil based on the swallow’s wing10.1142/S0219519413400228 ↗
7. Experimental research on noise reduction of bionic axial fan blade and mechanism analysis
8. Experimental Research on Noise Reduction of Bionic for Axial Flow Fan
9. An experimental investigation on the near-field turbulence for an airfoil with trailing-edge serrations at different angles of attack
10. An experimental investigation on the near-field turbulence for an airfoil with trailing-edge serrations and an owl specimen10.1121/1.4806623 ↗
11. The renormalization group, the ε-expansion and derivation of turbulence models10.1007/BF01060210 ↗
12. Analysis of solid-gas coupling model and simulation of coal containing gas
13. The Influence of Serrated Leading Edge Blade on Aerodynamic Performance of Counter-rotating Axial Fan
14. Avian Wing Geometry and Kinematics10.2514/1.16224 ↗
15. Research on similar material proportioning test of model test based on orthogonal design
16. Effects of Gurney Flap on the Performance of a Variable Pitch Axial Flow Fan
17. Separation delay through contoured transverse grooves on a 2D boat-tailed bluff body: Effects on drag reduction and wake flow features10.1016/j.euromechflu.2018.09.009 ↗
18. Reduced-order analysis of the acoustic near field of a ducted axial fan10.1016/j.ijheatfluidflow.2020.108657 ↗
19. Flow around a 5:1 rectangular cylinder: Effects of upstream-edge rounding10.1016/j.jweia.2020.104237 ↗
20. Numerical solution for the flow around a cylinder at Reynolds numbers of 40, 200 and 50010.1017/S0022112069001169 ↗
21. Structure of tip clearance flow in an isolated axial compressor rotor10.1115/1.3262263 ↗
22. Performance Optimization of Centrifugal Fan Based on Entropy Generation Theory
23. Effects of Guide Vane Installation Angle on Performance and Static Structure of Twin-stage Variable-pitch Axial Fan
24. Effect of meridional shape on performance of axial-flow fan10.1007/s12206-017-1008-1 ↗
25. Local entropy production in turbulent shear flows: A high-Reynolds number model with wall functions10.1016/j.ijheatmasstransfer.2003.11.025 ↗
26. Numerical investigation on effects of blade tip winglet on aerodynamic and aero acoustic performance of axial flow fan