Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020)
Source abstract
Abstract
The Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020) has been launched as a joint issue of the journals “Materials” and “Applied Sciences”. The 14 contributions published in this Special Issue of Applied Sciences present cutting-edge advances in the field of Manufacturing Engineering focusing on advances and innovations in manufacturing processes; additive manufacturing and 3D printing; manufacturing of new materials; Product Lifecycle Management (PLM) technologies; robotics, mechatronics and manufacturing automation; Industry 4.0; design, modeling and simulation in manufacturing engineering; manufacturing engineering and society; and production planning. Among them, the topic “Manufacturing engineering and society” collected the highest number of contributions (representing 22%), followed by the topics “Product Lifecycle Management (PLM) technologies”, “Industry 4.0”, and “Design, modeling and simulation in manufacturing engineering” (each at 14%). The rest of the topics represent the remaining 35% of the contributions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Additive Manufacturing and 3D Printing Technologies · Digital Transformation in Industry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Manufacturing Engineering, Industrial Engineering School, Universidad Nacional de Educación a Distancia (UNED), St/Juan del Rosal 12, E28040 Madrid, Spain
References (19)
Show source-provided references
1. Rubio, E.M., and Camacho, A.M. (2018). Special Issue of the Manufacturing Engineering Society (MES). Materials, 11.10.3390/ma11112149 ↗
2. Rubio, E.M., and Camacho, A.M. (2020). Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019). Materials, 13.10.3390/ma13092133 ↗
3. Camacho, A.M., and Rubio, E.M. (2020). Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019). Appl. Sci., 10.10.3390/app10051590 ↗
4. Rubio, E.M., and Camacho, A.M. (2021, April 16). Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020). Available online: https://www.mdpi.com/journal/applsci/special_issues/society_2020.10.3390/ma14123208 ↗
5. (2021, April 16). Sociedad de Ingeniería de Fabricación. Available online: http://www.sif-mes.org/.
6. Blanco, D., Rubio, E.M., de Pipaón, J.M.S., and Marín, M.M. (2020). Thicknesses/roughness relationship in mg-al-mg and mg-ti-mg hybrid component plates for drilled aeronautical lightweight parts. Appl. Sci., 10.10.3390/app10228208 ↗
7. Muñoz, V.G., Muneta, L.M., Carrasco-Gallego, R., de Juanes Marquez, J., and Hidalgo-Carvajal, D. (2020). Evaluation of the circularity of recycled pla filaments for 3D printers. Appl. Sci., 10.10.3390/app10248967 ↗
8. Fernández, D., Rodríguez-Prieto, A., and Camacho, A.M. (2020). Effect of process parameters and definition of favorable conditions in multi-material extrusion of bimetallic AZ31B-Ti6Al4V billets. Appl. Sci., 10.10.3390/app10228048 ↗
9. Gallego-García, S., Gejo-García, J., and García-García, M. (2021). Development of a maintenance and spare parts distribution model for increasing aircraft efficiency. Appl. Sci., 11.10.3390/app11031333 ↗
10. Gallego-García, S., and García-García, M. (2020). Market-oriented procurement planning leading to a higher service level and cost optimization. Appl. Sci., 10.10.3390/app10238734 ↗
11. Sánchez, I.I., Ares, J.E., Gaya, C.G., and Prieto, V.R. (2020). A new approach to the consideration and analysis of critical factors in robotic machining. Appl. Sci., 10.10.3390/app10248885 ↗
12. Cotrino, A., Sebastián, M.A., and González-Gaya, C. (2020). Industry 4.0 roadmap: Implementation for small and medium-sized enterprises. Appl. Sci., 10.10.3390/app10238566 ↗
13. Miqueo, A., Torralba, M., and Yagüe-Fabra, J.A. (2020). Lean manual assembly 4.0: A systematic review. Appl. Sci., 10.10.3390/app10238555 ↗
14. Juárez, D., Mengual, A., Ferrándiz, S., and Alarcón, F. (2021). Aspects of industrial design and their implications for society. Case studies on the influence of packaging design and placement at the point of sale. Appl. Sci., 11.10.3390/app11020517 ↗
15. Martín, F., Martín, M.J., and Cano, M.J. (2021). The upper bound theorem in forging processes: Model of triangular rigid zones on parts with horizontal symmetry. Appl. Sci., 11.10.3390/app11010336 ↗
16. Improved application of hyperspectral analysis to rock Art10.3390/app11031292 ↗
17. Urgiles, P., Sebastian, M.A., and Claver, J. (2020). Proposal and application of a methodology to improve the control and monitoring of complex hydroelectric power station construction projects. Appl. Sci., 10.10.3390/app10217913 ↗
18. Martín-Béjar, S., Claver, J., Sebastián, M.A., and Sevilla, L. (2020). Graphic applications of unmanned aerial vehicles (UAVs) in the study of industrial heritage assets. Appl. Sci., 10.10.3390/app10248821 ↗
19. Gallego-García, S., and García-García, M. (2021). Predictive sales and operations planning based on a statistical treatment of demand to increase efficiency: A supply chain simulation case study. Appl. Sci., 11.10.3390/app11010233 ↗