A Theoretical Model with Which to Safely Optimize the Configuration of Hydraulic Suspension of Modular Trailers in Special Road Transport
Source abstract
Abstract
The dimensions and weight of machines, structures, and components that need to be transported safely by road are growing constantly. One of the safest and most widely used transport systems on the road today due to their versatility and configuration are modular trailers. These trailers have hydraulic pendulum axles that are that are attached in pairs to the rigid platform above. In turn, these modular trailers are subject to limitations on the load that each axle carries, the tipping angle, and the oil pressure of the suspension system in order to guarantee safe transport by road. Optimizing the configuration of these modular trailers accurately and safely is a complex task. Factors to be considered include the load’s characteristics, the trailer’s mechanical properties, and road route conditions including the road’s slope and camber, precipitation and direction, and force of the wind. This paper presents a theoretical model that can be used for the optimal configuration of hydraulic cylinder suspension of special transport by road using modular trailers. It considers the previously mentioned factors and guarantees the safe stability of road transport. The proposed model was validated experimentally by placing a nacelle wind turbine at different points within a modular trailer. The weight of the wind turbine was 42,500 kg and its dimensions were 5133 × 2650 × 2975 mm. Once the proposed model was validated, an optimization algorithm was employed to find the optimal center of gravity for load, number of trailers, number of axles, oil pressures, and hydraulic configuration. The optimization algorithm was based on the iterative and automatic testing of the proposed model for different positions on the trailer and different hydraulic configurations. The optimization algorithm was tested with a cylindrical tank that weighed 108,500 kg and had dimensions of 19,500 × 3200 × 2500 mm. The results showed that the proposed model and optimization algorithm could safely optimize the configuration of the hydraulic suspension of modular trailers in special road transport, increase the accuracy and reliability of the calculation of the load configuration, save time, simplify the calculation process, and be easily implemented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research · Aerodynamics and Fluid Dynamics Research · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
LORTEK Technological Centre, Basque Research and Technology Alliance (BRTA), 20240 Ordizia, Gipuzkoa, Spain
Department of Mechanical Engineering, University of La Rioja, 26004 Logroño, La Rioja, Spain
Civil Engineering Group, Leeds Beckett University, Leeds LS1 3HE, UK
References (38)
Show source-provided references
1. Gong, I., Lee, K., Kim, J., Min, Y., and Shin, K. (2020). Optimizing Vehicle Routing for Simultaneous Delivery and Pick-Up Considering Reusable Transporting Containers: Case of Convenience Stores. Appl. Sci., 10.10.20944/preprints202005.0313.v1 ↗
2. An agent-based paradigm for detecting and acting on vehicles driving in the opposite direction on highways10.1016/j.eswa.2013.03.026 ↗
3. (2012). Water Preferred Policy: Guidelines for the Movement of Abnormal Indivisible Loads.
4. Taylor, N.B. (2005). The Impact of Abnormal Loads on Road Traffic Congestion, Transport Research Laboratory.
5. El-Gindy, M., and Kenis, W. (1998). Influence of a Trailer’s Axle Arrangement and Load on the Stability and Control of a Tractor Tractor-Semitrailer.
6. Lisowski, F., and Lisowski, E. (2020). Testing and Fatigue Life Assessment of Timber Truck Stanchions. Appl. Sci., 10.10.3390/app10176134 ↗
7. Kim, J. (2020). Truck Platoon Control Considering Heterogeneous Vehicles. Appl. Sci., 10.10.20944/preprints202006.0066.v1 ↗
8. Zhao, L., Zhang, Y., Yu, Y., Zhou, C., Li, X., and Li, H. (2020). Truck Handling Stability Simulation and Comparison of Taper-Leaf and Multi-Leaf Spring Suspensions with the Same Vertical Stiffness. Appl. Sci., 10.10.3390/app10041293 ↗
9. Ervin, R.D., Nisonger, R.L., Mallikarjunarao, C., and Gillespie, T.D. (1979). The Yaw Stability of Tractor-Semitrailers during Cornering, Technical Report for Transportation Research Institute.
10. Chen, Y., Huang, S., Davis, L., Du, H., Shi, Q., He, J., Wang, Q., and Hu, W. (2018). Optimization of Geometric Parameters of Longitudinal-Connected Air Suspension Based on a Double-Loop Multi-Objective Particle Swarm Optimization Algorithm. Appl. Sci., 8.10.3390/app8091454 ↗
11. Guowei, D., Wenhao, Y., Zhongxing, L., Khajepour, A., and Senqi, T. (2020). Sliding Mode Control of Laterally Interconnected Air Suspensions. Appl. Sci., 10.10.3390/app10124320 ↗
12. Simulación virtual: Una tecnología para el impulso de la innovación y la competitividad en la industria
13. Heavy truck dynamic rollover: Effect of load distribution, cargo type, and road design characteristics10.3141/1851-03 ↗
14. Ervin, R.D., and Yoram, G. (1986). The Influence of Weights and Dimensions on the Stability and Control of Heavy Duty Trucks in Canada, Transportation Association of Canada.
15. Gertsch, J., and Eichelhard, O. (2003). Simulation of Dynamic Rollover Threshold for Heavy Trucks, SAE International.10.4271/2003-01-3385 ↗
16. Bernard, J., Shannan, J., and Vanderploeg, M. (1989). Vehicle Rollover on Smooth Surfaces, SAE International.10.4271/891991 ↗
17. Winkler, C.B., Blower, D., Ervin, R., and Chalasani, R.M. (2000). Rollover of Heavy Commercial Vehicle, University of Michigan Transportation Research Institute.
18. BS EN 12195-1:2010 (2013). Load Restraining on Road Vehicles—Safety. Part 1: Calculation of Securing Forces, BSI.
19. Zhang, Q., Su, C., Zhou, Y., Zhang, C., Ding, J., and Wang, Y. (2020). Numerical Investigation on Handling Stability of a Heavy Tractor Semi-Trailer under Crosswind. Appl. Sci., 10.10.3390/app10113672 ↗
20. Cooper, K.R., and Watkins, S. (2007). The Unsteady Wind Environment of Road Vehicles, Part One: A Review of the on-Road Turbulent Wind Environment, SAE International.10.4271/2007-01-1236 ↗
21. Framework of vehicle–bridge–wind dynamic analysis10.1016/j.jweia.2004.03.007 ↗
22. On the Aerodynamics of Tractor-Trailers10.1007/978-3-540-44419-0_20 ↗
23. Mccallen, R., Flowers, D., Dunn, T., Owens, J., Browand, F., Hammache, M., Leonard, A., Brady, M., Salari, K., and Rutledge, W. (2000). Aerodynamic Drag of Heavy Vehicles (Class 7–8): Simulation and Benchmarking, SAE International.10.4271/2000-01-2209 ↗
24. A Computational Study of the Aerodynamic Forces Acting on a Tractor-Trailer Vehicle on a Bridge in Cross-Wind10.1016/S0167-6105(02)00461-0 ↗
25. Baker, C.J. (1998, January 10–13). The effects of high winds on vehicle behaviour. Proceedings of the International Symposium on Advances in Bridge Aerodynamics, Copenhagen, Denmark.
26. King, J.P.C., Mikitiuk, M.J., Davenport, A.G., and Isyumov, N. (1994). A Study of Wind Effects for the Northumberland Straits Crossing, Boundary Layer Wind Tunnel Laboratory, University of Western Ontario.
27. Scheuerle (2020, December 28). Operating Instructions: Combi Modular Transport System. Available online: https://www.scheuerle.com/products/self-propelled-transporters/intercombi.html.
28. (2020, December 28). Collett & Sons Ltd. Available online: https://www.collett.co.uk/.
29. Van Daal, M.J. (2009). The Art of the Heavy Transport, The Works international.
30. Corral Bobadilla, M., Lostado Lorza, R., Somovilla Gómez, F., and Escribano García, R. (2020). Adsorptive of Nickel in Wastewater by Olive Stone Waste: Optimization through Multi-Response Surface Methodology Using Desirability Functions. Water, 12.10.3390/w12051320 ↗
31. Improvement in determining the risk of damage to the human lumbar functional spinal unit considering age, height, weight and sex using a combination of FEM and RSM10.1007/s10237-019-01215-4 ↗
32. Íñiguez-Macedo, S., Lostado-Lorza, R., Escribano-García, R., and Martínez-Calvo, M.Á. (2019). Finite Element Model Updating Combined with Multi-Response Optimization for Hyper-Elastic Materials Characterization. Materials, 12.10.3390/ma12071019 ↗
33. Ruiz, L., Torres, M., Gómez, A., Díaz, S., González, J.M., and Cavas, F. (2020). Detection and Classification of Aircraft Fixation Elements during Manufacturing Processes Using a Convolutional Neural Network. Appl. Sci., 10.10.3390/app10196856 ↗
34. Fisher, R.A. (1974). The Design of Experiments, Hafner Press.
35. DOE (design of experiments) in development chemistry: Potential obstacles10.1021/op000025i ↗
36. Design of experiments (DoE) and process optimization. A review of recent publications10.1021/op500169m ↗
37. R Core Team (2020, December 28). R Core Team. R: A Language and Environment for Statistical Computing. Available online: https://www.r-project.org/.
38. (2020, December 28). InterCombi. Available online: https://www.scheuerle.com/products/self-propelled-transporters/intercombi.html.