Friction Coefficient Compensation Control in Synchronizer Synchronization Process for Transmission
Source abstract
Abstract
In the synchronization process of a synchronizer, the friction coefficient of the friction cone is changed because of friction heat. In this paper, the influence of a changing friction coefficient on shift quality was analyzed. The quantitative relationship between friction coefficient and its influencing factors was studied through a synchronizer synchronization process test bench. Based on the quantitative analysis and an optimal shift force control method, a compensation control strategy for friction coefficient was established. Moreover, the effectiveness of the compensation control was verified through simulation and experiment. The results showed that the friction coefficient was maintained near the expected value of 0.08 after the compensation control, the shifting speed difference the synchronous time was shortened by nearly 0.12 s, and the sliding friction was reduced by 4.64 J under the experimental conditions. The analysis and compensation of the friction coefficient provide a theoretical reference for improving shift quality.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Iterative Learning Control Systems · Magnetic Bearings and Levitation Dynamics · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Shandong Province
References (33)
Show source-provided references
1. Test and simulation of friction factor change in synchronizer working process
2. Marcus, S. (2001). Einfluss der Temperaturverteilung auf das Tribologishe Verhalten von Synchronisierung. [Ph.D. Thesis, Leibniz Universität Hannover].
3. Zhou, Y., and Chang, S. (2017). A Model-Assisted Reduced-Order ESO Based Cascade Controller for Sensorless Control of Independent Gear-Shifting Actuators. Appl. Sci., 7.10.3390/app7121283 ↗
4. Innovative design and gearshift control for direct-drive electromagnetic gearshift system equipped with servo synchronizer10.1177/0954407018760432 ↗
5. Cooperative regenerative braking control algorithm for an automatic-transmission-based hybrid electric vehicle during a downshift10.1177/0954407011421083 ↗
6. Zhao, E.H., Ma, B., and Li, H.Y. (2017). Study on the high temperature friction and wear behaviors of cu-Based friction pairs in wet clutches by pin-on-disc tests. Adv. Mater. Sci. Eng., 1–8.10.1155/2017/6373190 ↗
7. A model for supply voltage and temperature variation effects on synchronizer performance10.1109/TVLSI.2014.2365255 ↗
8. Non-linear dynamic simulation of gear response under the idling condition10.1007/s12239-012-0052-1 ↗
9. Influential parameters and numerical simulation of heat generated in the process of friction stir welding
10. Model validation and uncertainty analysis in the wear prediction of a wet clutch10.1016/j.wear.2016.07.007 ↗
11. Wet clutch friction characteristics obtained from simplified pin on disc test10.1016/j.triboint.2007.11.014 ↗
12. Parameter optimization and working process analysis of locking ring synchronizer
13. Huang, H., Nowoisky, S., and Knoblich, R. (2012, January 3–5). Modeling and testing of the hydro-mechanical synchronization system for a double clutch transmission. Proceedings of the 9th International Modelical Conference, Munich, Germany.10.3384/ecp12076287 ↗
14. Sensitivity Analysis on a Synchronization Mechanism for Manual Transmission Gearbox
15. Predicting friction in synchronizer systems10.1016/j.triboint.2015.12.038 ↗
16. Analysis of the influence of variable friction coefficient on synchronizer performance
17. Simulation research on synchronizer working process
18. Research on AMT shift quality
19. Yan, H., Xu, Z.P., Yuan, J.T., Liu, L., Tan, C., and Ge, W. (2018). Friction Characteristics of Synchronization Process Based on Tribo-Thermodynamics. Adv. Mater. Sci. Eng., 1–9.10.1155/2018/8467921 ↗
20. Lin, S.S. (2013). Research on Shift Control Technology of Mechanical Automatic Transmission Based on Direct Drive. [Ph.D. Thesis, Nanjing University of Science and Technology].
21. Design of test bench for transmission efficiency of AMT actuator10.4028/www.scientific.net/AMM.307.79 ↗
22. Experimental study on frictional characteristics of friction cone in synchronous process of lock-ring synchronizer
23. Li, B., Tan, C., Wang, G., Ge, W., and Sun, B. (2019). Sensorless landing control strategy of bistable permanent magnet actuator. Math. Probl. Eng., 1–11.10.1155/2019/7652438 ↗
24. Thermal influence on torque transfer of wet clutches in limited slip differential applications10.1016/j.triboint.2006.09.004 ↗
25. Understanding MTF additive effects on synchronizer friction10.4271/2011-01-2121 ↗
26. Study on friction factor of emergency brake friction plate
27. Research on variable working condition control of vehicle electric control system based on MAP
28. The dynamic and economical property of oxygen-enriched intake air gasoline engine based on MAP
29. Optimal control of shifting process of electric drive two-speed automatic transmission
30. Optimal control of shift synchronization process of mechanical automatic transmission of tracked vehicles
31. Hu, T.H., and Yeh, C.J. (2008, January 3–5). Design of control logic and compensation strategy for electric power steering systems. Proceedings of the 2008 IEEE Vehicle Power and Propulsion Conference, Harbin, China.
32. Simultaneous vibration suppression control for permanent magnet synchronous motor using repetitive control and feed forward compensation10.1541/ieejias.127.747 ↗
33. Compensation torque algorithm for electric power steering system of puncture cars