Numerical Analysis of the Load-Displacement Behaviour of Cast-in-Place Progressive Anchorage in Reinforced Concrete Members
Source abstract
Abstract
Modern construction requirements for building structures are currently focused on reducing the time required for construction, dealing with the lack of qualified human resources and ensuring comprehensive construction work quality. The problems mentioned above of today’s construction industry are significantly reduced by modern prefabrication and the efficient use of the most common building materials—steel and concrete. Critical components of such construction systems are their joints. Currently, there are many different types of joints of precast concrete structural elements. Integral parts of these joints are the various anchorages. For connecting load-bearing components, cast-in-place anchor systems are preferred to post-installed ones. The appropriate design of this small but crucial structural component is a complicated engineering issue in some cases. The finite element method (FEM) represents a practical opportunity to design and analyze anchorage systems in detail. A detailed numerical study based on an experimental program was performed to understand cast-in-place anchors’ real behavior and clarify some of the parameters of their design. This paper explains the creation of a numerical model, compares the FEM model with the performed experiments and presents the interesting results of the performed parametric study.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
Department of Structures, Faculty of Civil Engineering, Technical University of Ostrava, Ludvíka Podéště 1875/17, 708 00 Ostrava-Poruba, Czech Republic
Funding
Vedecká Grantová Agentúra MŠVVaŠ SR a SAV
References (51)
Show source-provided references
1. Application of structure monitoring systems to the assessment of the behaviour of bridges in mining areas10.1088/1757-899X/245/3/032018 ↗
2. Road structural elements temperature trends diagnostics using sensory system of own design10.1088/1757-899X/236/1/012036 ↗
3. Non-invasive diagnostic methods for investigating the quality of Žilina airport’s runway10.1515/congeo-2015-0022 ↗
4. Experimental Analysis of Lateral Torsional Buckling of Beams with Selected Cross-Section Types10.1016/j.proeng.2017.04.523 ↗
5. Moravcik, M., and Bujnakova, P. (June, January 29). Testing and numerical analysis of precast prestressed girders for highway bridges. Proceedings of the 3rd International Fib Congress and Exhibition, Incorporating the PCI Annual Convention and Bridge Conference: Think Globally, Build Locally, Proceedings, Washington, DC, USA.
6. Cast-in-place headed anchor groups under shear: Experimental and numerical modelling10.1016/j.istruc.2018.03.008 ↗
7. Experimental investigation of reinforced SCC beam-column joint with rectangular spiral reinforcement under cyclic loading10.1016/j.conbuildmat.2018.12.192 ↗
8. Development and testing of precast concrete beam-to-column connections10.1016/j.engstruct.2013.07.021 ↗
9. Experimental and numerical evaluation of proposed precast concrete connections10.1002/suco.201500168 ↗
10. Full-scale tests of precast concrete beam-column connections with composite T-beams and cast-in-place columns subjected to cyclic loading10.1002/suco.201800171 ↗
11. Experimental tests on multiple-slit devices for precast concrete panels10.1016/j.engstruct.2018.04.035 ↗
12. Nilforoush, R. (2017). Anchorage in Concrete Structures: Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors. [Ph.D. Thesis, Luleå University of Technology].
13. Pryout capacity of cast-in headed stud anchors10.15554/pcij.03012005.90.112 ↗
14. Tensile capacity of anchor bolts in uncracked concrete: Influence of member thickness and anchor’s head size
15. Pull-out and shear strength equations for headed studs considering edge distance
16. Tensile behaviour of cast-in-place headed anchors with different embedment depths10.1080/19648189.2014.965850 ↗
17. Piccinin, R. (2011). Effects of Compressive and Tensile Fields on the Load Carrying Capacity of Headed Anchors. [Ph.D. Thesis, University of Minnesota].
18. Nonlinear FE analysis of slab-beam-column connection in precast concrete structures10.1016/j.engstruct.2017.04.028 ↗
19. Non-linear finite element model for the novel mechanical beam-column joints of precast concrete-based frames10.1016/j.compstruc.2017.04.016 ↗
20. Almohagry, A.A., Ibrahim, Z., Athar, F.A., Hanif, M.U., and Zaki, A. (2021). Performance of Precast Beam to Column Connection With Billet Connector Using FEM. 4th International Conference on Sustainable Innovation 2020–Technology, Engineering and Agriculture (ICoSITEA 2020), Atlantis Press.10.2991/aer.k.210204.012 ↗
21. A multiscale model for the numerical simulation of the anchor bolt pull-out test in lightweight aggregate concrete10.1016/j.conbuildmat.2015.07.170 ↗
22. 3D FE analysis of anchor bolts with large embedment depths10.1016/j.engfracmech.2006.01.019 ↗
23. Numerical modelling of anchor bolts under pullout and relaxation tests10.1016/j.conbuildmat.2009.12.015 ↗
24. A hybrid methodology using finite elements and neural networks for the analysis of adhesive anchors exposed to hurricanes and adverse environments10.1016/j.engstruct.2020.110505 ↗
25. Prediction of shear capacity of single anchors located near a concrete edge using neural networks10.1016/j.compstruc.2005.03.019 ↗
26. Cervenka, V., Jendele, L., and Cervenka, J. (2011). ATENA Program Documentation, Part 1: Theory, Cervenka Consulting Ltd.
27. ATENA—A tool for engineering analysis of fracture in concrete10.1007/BF02706996 ↗
28. Peikko Group (2019). PCs® CORBEL, Hidden Corbel for Supporting Beams, Peikko Group. Technical Manual.
29. Tests of Short Headed Bars with Anchor Reinforcement Used in Beam-to-Column Joints10.14359/51701121 ↗
30. ETAG 001 (2008). Guideline for European Technical Approval of Metal Anchors for Use in Concrete. Annex A: Details of Tests, EOTA.
31. ETAG 001 (2006). Guideline for European Technical Approval of Metal Anchors for Use in Concrete. Annex B: Tests for Admissible Service Conditions Detailed Information, EOTA.
32. Triaxial Failure Criterion for Concrete and Its Generalisation
33. Faria, D.M.V., Biscaia, H., Lucio, V., and Ramos, A.P. (2011). Material and geometrical parameters affecting punching of reinforced concrete flat slabs with orthogonal reinforcement. Symposium PRAGUE 2011—Concrete Engineering for Excellence and Efficiency, Czech Concrete Society.
34. Saouma, V.E. (2014). Numerical Modeling of AAR, CRC Press. [1st ed.].10.1201/b16353 ↗
35. Three dimensional combined fracture–plastic material model for concrete10.1016/j.ijplas.2008.01.004 ↗
36. The phenomena of rupture and flow in solids
37. Vesely, F. (2005). Parameters of Concrete for Description of Fracture Behaviour. [Ph.D. Thesis, Brno University of Technology, Institute of Structural Mechanics].
38. Kersner, Z. (2005). Brittleness and Fracture Mechanics of Cement-Based Composites. [Habilitation Thesis, Brno University of Technology, Institute of Structural Mechanics].
39. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
40. Crack band theory for fracture of concrete10.1007/BF02486267 ↗
41. Sadilek, V. (2008). Modeling Statistical-Energetic Size Effect on Strength of Concrete Structures Using Computational Mechanics. [Madter’s Thesis, Brno University of Technology, Institute of Structural Mechanics].
42. Steel design by advanced analysis: Material modeling and strain limits10.1016/j.eng.2018.11.026 ↗
43. Finite element modeling of the elastoplastic axial-torsional response of helical constructions to traction loads10.1016/j.ijmecsci.2017.09.002 ↗
44. Practical strain-hardening material properties for use in deformation-based structural steel design10.1016/j.tws.2015.02.002 ↗
45. Kabele, P., Červenka, V., and Cervenka, J. (2010). ATENA Program Documentation, Part 3-1: Example Manual ATENA Engineering, Cervenka Consulting Ltd.
46. Johnson, S. (2006). Comparison of non-linear finite element modeling tools for tructural concrete. CEE561 Project, University of Illinois.
47. Resistance model uncertainty in non-linear finite element analyses of cyclically loaded reinforced concrete systems10.1016/j.engstruct.2020.110496 ↗
48. Gino, D., Castaldo, P., Giordano, L., and Mancini, G. (2021). Model uncertainty in non-linear numerical analyses of slender reinforced concrete members. Struct. Concr., 1–26.10.1002/suco.202000600 ↗
49. Vithalkar, A. (2019). Investigation of Interface Modelling Techniques Using Finite Element Analysis with ATENA. [Master’s Thesis, Delft University of Technology].
50. Pryl, D., and Cervenka, J. (2014). ATENA Program Documentation, Part I1: Troubleshooting Manual, Cervenka Consulting Ltd.
51. Pullout behaviour of cast-in-place headed and bonded anchors with different embedment depths10.1617/s11527-015-0616-4 ↗