Analysis of the Use of Geomorphic Elements Mapping to Characterize Subaqueous Bedforms Using Multibeam Bathymetric Data in River System

Riverbed micro-topographical features, such as crest and trough, flat bed, and scour pit, indicate the evolution of fluvial geomorphology, and have an influence on the stability of underwater structures and overall scour pits. Previous studies on bedform feature extraction have focused mainly on the rhythmic bed surface morphology and have extracted crest and trough, while flat bed and scour pit have been ignored. In this study, to extend the feature description of riverbeds, geomorphic elements mapping was used by employing three geomorphic element classification methods: Wood’s criteria, a self-organization map (SOM) technique, and geomorphons. The results showed that geomorphic element mapping can be controlled by adjusting the slope tolerance and curvature tolerance of Wood’s criteria, using the map unit number and combination of the SOM technique and the flatness of geomorphons. Relatively flat bed can be presented using “plane”, “flat planar”, and “flat” elements, while scour pit can be presented using a “pit” element. A comparison of the difference between parameter settings for landforms and bedforms showed that SOM using 8 or 10 map units is applicable for land and underwater surface and is thus preferentially recommended for use. Furthermore, the use of geomorphons is recommended as the optimal method for characterizing bedform features because it provides a simple element map in the absence of area loss.