Hybrid Laminate for Haptic Input Device with Integrated Signal Processing
Source abstract
Abstract
Achieving lightweight construction through only material substitution does not realize the full potential of producing a lightweight material, hence, it is no longer sufficient. Weight-saving goals are best achieved through additional function integration. In order to implement this premise for mass production, a manufacturing process for joining and forming hybrid laminates using a new tool concept is presented. All materials used are widely producible and processable. The manufactured cover of an automotive center console serves to demonstrate a human interface device with impact detection and action execution. This is only possible through a machine learning system, which is implemented on a small—and thus space- and energy-saving—embedded system. The measurement results confirm the objective and show that localization was sufficiently accurate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Computer Engineering, Chemnitz University of Technology, Straße der Nationen 62, 09111 Chemnitz, Germany
Forming and Joining, Chemnitz University of Technology, Reichenhainer Straße 70, 09107 Chemnitz, Germany
Department of Lightweight Structures and Polymer Technology, Chemnitz University of Technology, Reichenhainer Straße 31/33, 09126 Chemnitz, Germany
Funding
Deutsche Forschungsgemeinschaft
References (27)
Show source-provided references
1. Vlot, A., and Gunnink, J.W. (2001). Fibre Metal Laminates an Introduction, Kluwer Academic Publishers.10.1007/978-94-010-0995-9 ↗
2. Wielage, B., Nestler, D., Steger, H., and Kroll, L. (2011). CAPAAL and CAPET—New Materials of High-Strength, High-Stiff Hybrid Laminates. Integrated Systems, Design and Technology 2010, Springer.10.1007/978-3-642-17384-4_3 ↗
3. Kroll, L., Walther, M., Nendel, W., Heinrich, M., and Tröltzsch, J. (2011). Initial Stress Behaviour of Micro Injection-Moulded Devices with Integrated Piezo-Fibre Composites. Integrated Systems, Design and Technology 2010, Springer.10.1007/978-3-642-17384-4_10 ↗
4. Structural integration of PZT fibers in deep drawn sheet metal for material-integrated sensing and actuation
5. Kräusel, V., Graf, A., Nestler, D., Jung, H., Arnold, S., and Wielage, B. (2014, January 20–23). Forming of new thermoplastic based fibre metal laminates. Proceedings of the 3rd Global Conference on Materials Science and Engineering (CMSE 2014), Shanghai, China.
6. Mechanical properties and forming behaviour of laminated steel/polymer sandwich systems with local inlays—Part 210.1016/j.compstruct.2016.10.111 ↗
7. Stamp forming of polypropylene based fibre–metal laminates: The effect of process variables on formability10.1016/j.jmatprotec.2005.09.002 ↗
8. Graf, A., and Lachmann, L. (2013, January 27–28). Modellierung der Umformung von hybriden Schichtverbunden mit thermoplastischer Matrix. Proceedings of the Sächsische Fachtagung Umformtechnik (SFU), Dresden, Germany.
9. Process Chains for Fibre Metal Laminates10.4028/www.scientific.net/AMR.1018.285 ↗
10. Identifying impacts in composite plates with piezoelectric strain sensors, part I: Theory10.1177/1045389X9800901108 ↗
11. Health-monitoring-system based on piezoelectric transducers10.1016/S1270-9638(99)80027-3 ↗
12. Acoustic impact localization in plates: properties and stability to temperature variation10.1109/TUFFC.2007.251 ↗
13. Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring10.1088/0964-1726/16/4/032 ↗
14. Impact localization in complex structures using laser-based time reversal10.1177/1475921712449508 ↗
15. Fu, H., and Xu, Q. (2013). Locating impact on structural plate using principal component analysis and support vector machines. Math. Probl. Eng., 2013.10.1155/2013/352149 ↗
16. Fast detection of impact location using kernel extreme learning machine10.1007/s00521-014-1568-2 ↗
17. Structural damage detection and identification using neural networks10.2514/3.11964 ↗
18. Detection of impact location and magnitude for isotropic plates using neural networks10.1177/1045389X9700800109 ↗
19. An automatic impact monitor for a composite panel employing smart sensor technology10.1088/0964-1726/14/1/027 ↗
20. Impact detection in an aircraft composite panel—A neural-network approach10.1016/j.jsv.2006.07.019 ↗
21. Development of hybrid assembled composites with sensory function10.1016/j.cirp.2015.04.054 ↗
22. Graf, A., Decker, R., Kräusel, V., Landgrebe, D., and Kroll, L. (2018, January 18–19). Suitable process for mass production of hybrid laminates with sensor functionality. Proceedings of the International Conference on Hybrid Materials and Structures, Bremen, Germany.
23. Decker, R., Heinrich, M., Tröltzsch, J., Rhein, S., Gebhardt, S., Michaelis, A., and Kroll, L. (2015, January 14–16). Development and Characterization of Piezo-active Polypropylene Compounds Filled With PZT and CNT. Proceedings of the 5th Scientific Symposium CRC/Transregio 39, Dresden, Germany.
24. Continuous manufacturing of piezoceramic hybrid laminates for functionalised formed structural components professorship for forming and joining
25. Graf, A., Kräusel, V., Landgrebe, D., Decker, R., and Kroll, L. (2016, January 20–21). Joining and forming of hybrid assembled composites with sensory function. Proceedings of the Euro Hybrid Materials and Structures, Kaiserslautern, Germany.
26. Ullmann, F., Hardt, W., and Zhmud, V. (2017, January 29–30). Machine learning algorithms for impact localization on formed piezo metal composites. Proceedings of the 2017 International Siberian Conference on Control and Communications (SIBCON), Astana, Kazakhstan.10.1109/SIBCON.2017.7998552 ↗
27. LIBSVM: A library for support vector machines10.1145/1961189.1961199 ↗