journal article·2026-02-22Open access

Research on the Application of Equivalent Stress Analysis Across the Entire Dam Surface of Arch Dams Under Seismic Action

Hui Peng, Mengran Wang, Ling Jiang, Baojing Zheng

Applied Sciences· Volume 16· Issue 4

Abstract

For arch dam seismic safety evaluation, the finite element equivalent stress method has been widely used, and existing studies have realized mature equivalent stress calculation along the foundation surface path. However, from the scientific research perspective, there is a lack of a full dam surface equivalent stress characterization method for arch dams under seismic action; from the engineering practice perspective, the traditional path method cannot fully reflect the overall stress distribution of the dam, leading to insufficient comprehensive safety evaluation. To accurately assess the impact of seismic action on the overall structural safety of arch dams and address the above limitations, this study develops a methodology for calculating equivalent stress across the entire dam surface of arch dams under seismic action. Taking a concrete arch dam as the research object, a seismic wave input method based on viscoelastic artificial boundaries is employed. Three-dimensional finite element analysis of the arch dam is performed using ABAQUS, integrated with Python-based secondary development to extract stress along the integration path of each arch ring layer and calculate sectional internal forces. The equivalent stress of each arch ring layer integration path is then processed using the material mechanics method to obtain the equivalent stress distribution across the entire dam surface. A comparative analysis is conducted between the equivalent stress on the entire dam surface and that along paths on the foundation surface regarding the seismic dynamic response and behavioral patterns of the dam. The results demonstrate that the full dam surface equivalent stress approach not only accurately captures the extreme tensile and compressive stress values in the downstream foundation area but also identifies stress extrema in the upstream dam crest region, thereby achieving comprehensive characterization of the dam stress field under seismic action and enhancing both the efficiency and accuracy of equivalent stress calculations for arch dams. This method provides more comprehensive and reliable data support for seismic design optimization and reinforcement of arch dams. Compared with the traditional foundation surface path method, the proposed method achieves 100% identification of the whole dam surface stress extremum areas, with a maximum relative error of only 1.62% in the overlapping calculation area.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dam Engineering and Safety · Hydraulic flow and structures · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Water Conservancy and Environment, Three Gorges University, Yichang 443000, China

References (49)

Show source-provided references
1. Research progress on finite element model updating of hydraulic structures based on vibration response
2. Investigations on seismic response of Idukki Arch Dam considering concrete ageing10.1007/s41062-025-02184-7 ↗
3. Prediction and analysis of temperature recovery after arch closure grouting of Baihetan Arch Dam10.1016/j.advengsoft.2025.104012 ↗
4. Calculation and improvement of complex mechanical properties of the mega arch dam under multiple loads based on finite element methods10.1155/2018/2582561 ↗
5. Numerical analysis method of equivalent deformation parameters for grouted arch dam abutment fractured rock masses considering scale effects and anisotropy10.1016/j.compgeo.2023.105929 ↗
6. Conde, A., Salete, E., and Toledo, M.Á. (2025). Detection of cracks in arch dams using monitoring data and numerical models. Appl. Sci., 15.10.3390/app15116105 ↗
7. Wang, Y.Q., Zhao, R.H., Liu, Y., Chen, Y.Z., and Ma, X.Y. (2019). Shape optimization of single-curvature arch dam based on sequential kriging-genetic algorithm. Appl. Sci., 9.10.3390/app9204366 ↗
8. Xu, B., Lu, J.Y., Wang, S.W., Chen, X.D., Qin, X.N., Bu, J.W., Qiu, J.C., Sun, L.S., and Li, Y.T. (2024). A novel optimal sensor placement framework for concrete arch dams based on IAHA considering the effects of cracks and elastic modulus degradation. Appl. Sci., 14.10.3390/app14198921 ↗
9. Characteristics of deep fractured rock mass at Yebatan Dam site and its influence on arch dam stability
10. Ingle, S., Lin, L., and Li, S.S. (2025). Seismic Assessment of Concrete Gravity Dam via Finite Element Modelling. GeoHazards, 6.10.3390/geohazards6030053 ↗
11. Research on cracking and stability of high arch dams on complex foundations
12. Application of finite element method in arch dam design
13. A comparative study of the cracking effect of induced joints of various spatial formations10.1155/2019/7876503 ↗
14. Nonlinear seismic assessment of concrete dams using a novel elastoplastic damage numerical framework
15. Cracking analysis of induced joints in roller compacted concrete arch dam10.1016/j.aej.2021.08.082 ↗
16. Study on the freeze–thaw effect on concrete arch dam using an improved response surface method10.1038/s41598-023-46544-8 ↗
17. 3D finite element equivalent stress analysis of roller compacted concrete arch dam
18. 3D finite element equivalent stress calculation of arch dam based on ABAQUS
19. Comparative study on measured and calculated stresses at dam heel of high arch dams
20. Liu, Y., Wang, H., Yan, L., Yu, J., Zeng, W., and Xu, W. (2024). Study on Valley Shrink Deformation of the High Arch Dam with Large Faults near Dam Area during Initial Impoundment. Water, 16.10.3390/w16182694 ↗
21. Simulation analysis and evaluation of stress of Dagangshan Arch Dam in empty reservoir condition during construction period
22. Angelakis, A.N., Baba, A., Valipour, M., Dietrich, J., Fallah-Mehdipour, E., Krasilnikoff, J., Bilgic, E., Passchier, C., Tzanakakis, V.A., and Kumar, R. (2024). Water Dams: From Ancient to Present Times and into the Future. Water, 16.10.3390/w16131889 ↗
23. Key technologies and practices in construction of 300m-class ultra-high arch dams10.1016/J.ENG.2016.03.012 ↗
24. Research on the development trend of seismic safety theory for high dams
25. Research on global damage and failure of gravity dams under pulse-type seismic action
26. Evaluation of excavation-induced relaxation and its application to an arch dam foundation10.1002/nag.1001 ↗
27. Non-linear seismic response of arch dams with contraction joint opening and joint reinforcements10.1002/1096-9845(200010)29:10<1547::AID-EQE979>3.0.CO;2-N ↗
28. Constitutive model for alkali-aggregate reactions
29. Lin, P., Wei, P., Wang, W., and Huang, H. (2018). Cracking Risk and Overall Stability Analysis of Xulong High Arch Dam: A Case Study. Appl. Sci., 8.10.3390/app8122555 ↗
30. A Method for Applying the Use of a Smart 4 Controller for the Assessment of Drill String Bottom-Part Vibrations and Shock Loads10.3390/vibration7030043 ↗
31. Threshold Vibration Metrics of Drilling Tools as Indicators of Bit Wear and Rate of Penetration Decline: Field Trials and Data Interpretation10.33271/mining19.04.147 ↗
32. Bado, M.F., and Casas, J.R. (2021). A Review of Recent Distributed Optical Fiber Sensors Applications for Civil Engineering Structural Health Monitoring. Sensors, 21.10.3390/s21051818 ↗
33. Towards a Semantic Construction Digital Twin: Directions for Future Research10.1016/j.autcon.2020.103179 ↗
34. Li, Y.F., Wang, J., Shan, Y.G., Wang, C., and Hu, Y.B. (2021). Measurement and Analysis of Downhole Drill String Vibration Signal. Appl. Sci., 11.10.3390/app112311484 ↗
35. A Digital Twin Method for Real-Time Analysis of Structural Deformation and Failure for High Arch Dams10.1016/j.engstruct.2025.121426 ↗
36. A Visualization System for Dam Safety Monitoring with Application of Digital Twin Platform10.1016/j.eswa.2025.126740 ↗
37. Cheng, L., Ma, C.H., Yuan, X.N., Yang, J., Hu, L.C., and Zheng, D.J. (2022). A Literature Review and Result Interpretation of the System Identification of Arch Dams Using Seismic Monitoring Data. Water, 14.10.3390/w14203207 ↗
38. A Deep Learning Method for Predicting the Displacement of Concrete Arch Dams Considering the Effect of Cracks10.1016/j.aei.2024.102574 ↗
39. Conde, A., Toledo, M.Á., and Salete, E. (2025). Impact of Arch Dam Cracking on Monitoring Data. Appl. Sci., 15.10.3390/app15031096 ↗
40. Determination of equivalent stress on the basis of a statistical theory of fatigue fracture in a complex stress state10.1007/BF01529224 ↗
41. Extension of the static equivalent stress hypotheses to linearly vibrating systems using wave interference—The LiWi approach10.1016/j.ijfatigue.2020.106103 ↗
42. Equivalent stress approach in modelling unsaturated soils10.1002/nag.1077 ↗
43. Variable-kinematic finite beam elements and viscous-spring artificial boundary for wave propagation in infinite space10.1093/jom/ufaf010 ↗
44. The influence of stratigraphic conditions in horizontally layered soils on the propagation dynamics of seismic waves10.1016/j.soildyn.2025.109720 ↗
45. An arc-consistent viscous-spring artificial boundary for numerical analysis of seismic response of underground structures
46. Earthquake damage analysis of arch dams considering dam–water–foundation in-teraction10.1016/j.soildyn.2013.02.006 ↗
47. Effect of the impounding process on the overall stability of a high arch dam: A case study of the Xiluodu dam, China10.1007/s12517-015-1868-6 ↗
48. Seismic damage assessment using frequency characteristics of acceleration records in centrifugal vibration table tests for CSG dam10.1016/j.soildyn.2025.110000 ↗
49. Effect of abutment movements on nonlinear seismic response of an arch dam10.1080/15732479.2019.1684955 ↗