An Experimental Investigation on the Barrier Performance of Complex-Modified Bentonite

The barrier performance of containment liners against heavy metals and other contaminants is a critical element in ensuring environmental safety. However, the high concentration of multivalent cations in landfill leachate raises concerns about the effectiveness of conventional barriers (e.g., sodium bentonite). To address concerns regarding the high permeability and elevated heavy metal concentrations in effluents from sodium bentonite (Na-B) barriers, this study proposes the use of new complex-modified sorbent bentonite—specifically treated with disodium ethylenediaminetetraacetate (EDTA-2Na) and sodium tripolyphosphate (STPP). Batch adsorption and flexible-wall permeability tests in extreme synthetic leachate demonstrate that the complex-modified sodium bentonite not only maintains low permeability but also enhances contaminant adsorption capacity of barriers. When modified with 2% EDTA-2Na and 4% STPP (by mass), the maximum Zn(II) adsorption capacity of bentonite was measured at 43.22 and 48.22 μg/g, respectively. These values correspond to enhancements by a factor of 1.99 and 2.32 compared to the unmodified Na-B. Simultaneously, the hydraulic conductivity met the permeability requirements for engineering barrier systems (k < 1 × 10−7 cm/s) throughout the tested range of confining pressures. Microscopic analyses confirmed the successful incorporation of functional groups into bentonite by both EDTA-2Na and STPP. STPP-induced electrostatic repulsion, promoting ordered particle stacking and dense structure formation. EDTA-2Na physically filled pores to block ion migration pathways while electrochemically counteracting double-layer compression under high ionic strength. This effective strategy resolves the long-standing trade-off between permeability and adsorption capacity in conventional bentonite, providing a theoretical basis for designing barrier materials in complex contaminated sites.