Gas-Liquid Flow of R290 in the Integrated Electronic Expansion Valve and Vapor Injection Loop for Heat Pump
Source abstract
Abstract
Vapor injection (VPI) can significantly enhance the heating performance of electric vehicle (EV) heat pump systems under low ambient temperatures, making the integrated design and control of the VPI loop essential. This study uses R290 as the working fluid and investigates the gas–liquid flow characteristics of the vapor-injection electronic expansion valve (VPI-EXV) in the VPI loop. The evaporation coefficient in the Lee model is calibrated using four typical operating conditions, keeping the relative errors of both total mass flow rate and injection ratio predictions within 10%. Results show that valve opening is the dominant factor: as the opening increases from 10% to 100%, the injection ratio rises from 0.24 to 0.83, while increasing outlet pressure from 0.58 MPa to 0.78 MPa and inlet subcooling from 0 °C to 10 °C reduces it by about 18% and 9%, respectively. The 90° turning structure inside the VPI-EXV induces recirculation and high turbulent kinetic energy downstream of the throttling region, modifying the outlet gas-liquid distribution, based on which an injection ratio control strategy with valve opening as the primary variable is proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Refrigeration and Air Conditioning Technologies · Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Key Laboratory of Advanced Manufacture Technology for Automobile Parts, Chongqing University of Technology, Ministry of Education, Chongqing 400054, China
Funding
Key Laboratory of Advanced Manufacture Technology for Automobile Parts, Ministry of Education of the People’s Republic of China · The Science and Technology Research Program of Chongqing Municipal Education Commission
References (39)
Show source-provided references
1. Study on the refrigerant interchangeability under extreme operating conditions of R1234yf heat pump systems for electric vehicles10.1016/j.applthermaleng.2024.122789 ↗
2. Numerical study of the effects of injection-port design on the heating performance of an R134a heat pump with vapor injection used in electric vehicles10.1016/j.applthermaleng.2017.08.098 ↗
3. Muhammad, A.H., Hakiem, F.Z.A., Kim, H., Park, S.H., and Chang, Y.S. (2025). Design and Performance Evaluation of Car Seat Heat Pump for Electric Vehicles. Energies, 18.10.3390/en18236197 ↗
4. Theoretical analysis and experimental research on R1234yf as alternative to R134a in a heat pump system10.1002/ep.14041 ↗
5. Chai, L. (2025). Numerical Investigation on Heat Transfer of Supercritical CO2 in Minichannel with Fins Integrated in Sidewalls. Processes, 13.10.3390/pr13082630 ↗
6. Dan, D., Zhao, Y., Wei, M., and Wang, X. (2023). Review of Thermal Management Technology for Electric Vehicles. Energies, 16.10.3390/en16124693 ↗
7. A novel characterization methodology for vapor-injected compressors: A comparative analysis with existing black-box models10.1016/j.ijrefrig.2024.10.036 ↗
8. Experimental study on low temperature heating performance of different vapor injection heat pump systems equipped with a flash tank and economizers for electric vehicle10.1016/j.applthermaleng.2023.120428 ↗
9. Performance analysis of an R290 vapor-injection heat pump system for electric vehicles in cold regions10.1007/s11431-024-2649-3 ↗
10. Yuan, W., Guo, Y., and Zhang, Y. (2024). Performance Research on Heating Performance of Battery Thermal Management Coupled with the Vapor Injection Heat Pump Air Conditioning. World Electr. Veh. J., 15.10.3390/wevj15010033 ↗
11. Mass flow characteristics and empirical modeling of R22 and R410A flowing through electronic expansion valves10.1016/j.ijrefrig.2007.03.011 ↗
12. Energy and environmental performance of vapor injection heat pumps using R134a, R152a, and R1234yf under various injection conditions10.1016/j.energy.2023.128265 ↗
13. Influence of electronic expansion valve on heating performance of vehicle heat pump system10.2298/TSCI2303819S ↗
14. Comprehensive study on EEVs regulation characteristics of vapor-injection CO2 heat pump for electric vehicles10.1016/j.ijrefrig.2022.12.015 ↗
15. Development of refrigerant flow rate correlation for electronic expansion valve using valve flow coefficient10.1016/j.applthermaleng.2023.120324 ↗
16. Refrigerant flow through electronic expansion valve: Experiment and neural network modeling10.1016/j.applthermaleng.2015.09.062 ↗
17. Mass flow characteristics prediction of refrigerants through electronic expansion valve based on XGBoost10.1016/j.ijrefrig.2023.12.011 ↗
18. Numerical investigation of refrigerant flashing flow in electronic expansion valves10.1016/j.ijheatfluidflow.2025.109827 ↗
19. Numerical Investigation on the Internal Flow Field of Electronic Expansion Valve as the Throttle Element10.4271/2022-01-0318 ↗
20. Study on the Flow and Acoustic Field of an Electronic Expansion Valve under Refrigeration Condition with Phase Change
21. Research on the characteristics of two-phase flow-induced noise in the cavitation dynamics of electronic expansion valves10.1063/5.0185104 ↗
22. Numerical and experimental study on cavitation and noise characteristics of electronic expansion valve10.1038/s41598-025-97607-x ↗
23. Experimental study of propane heat pump system with secondary loop and vapor injection for electric vehicle application in cold climate10.1016/j.applthermaleng.2022.119196 ↗
24. Experimental study of the integrated vapor injection R1234yf electric vehicle heat pump system in cold conditions10.1016/j.applthermaleng.2025.126214 ↗
25. Refrigerant flow characteristics of electronic expansion valve based on thermodynamic analysis and experiment10.1016/j.applthermaleng.2007.03.023 ↗
26. Matsson, J.E. (2022). An Introduction to ANSYS Fluent 2022, Sdc Publications.
27. Computational modelling of flash boiling flows: A literature survey10.1016/j.ijheatmasstransfer.2017.03.121 ↗
28. Numerical Simulation on BLEVE Mechanism of Supercritical Carbon Dioxide10.1016/j.egypro.2015.07.204 ↗
29. Flash boiling and pressure recovery phenomenon during venting from liquid ammonia tank ullage10.1016/j.psep.2023.12.037 ↗
30. Comparison of the performance of propane (R290) and propene (R1270) as alternative refrigerants for cooling during expansion in a helical capillary tube: A CFD-based insight investigation10.1016/j.ijrefrig.2022.11.009 ↗
31. Modelling and numerical simulations of heat and mass transfer in multiphase flow during the release of liquid ammonia from a storage tank through the piping system to the open atmosphere10.1016/j.ijheatmasstransfer.2025.127097 ↗
32. Two-equation eddy-viscosity turbulence models for engineering applications10.2514/3.12149 ↗
33. Lemmon, E.W., Bell, I.H., Huber, M., and McLinden, M. (2018). NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, National Institute of Standards and Technology. Standard Reference Data Program.
34. Numerical study on the structural optimization of R290 two-phase ejector with a non-equilibrium CFD model10.1016/j.ijrefrig.2024.11.027 ↗
35. Numerical simulation study on the spatiotemporal evolution characteristics of heat transfer in the static flash evaporation10.1016/j.ijthermalsci.2024.109675 ↗
36. Simulation study on noise reduction effect of porous material on electronic expansion valve10.1016/j.ijrefrig.2023.02.018 ↗
37. Numerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore10.1038/s41598-024-52583-6 ↗
38. Orthogonal experimental-based thermal management design and simulation optimization of a liquid-cooled battery module10.1038/s41598-025-19098-0 ↗
39. Energy and exergy analysis of a transcritical CO2 refrigeration system integrated with vapor injection and mechanical subcooling10.1016/j.supflu.2025.106592 ↗