Additive Manufacturing of AlNiCo5 Hard Magnetic Alloy Through Laser Powder Bed Fusion: A Single Scan Track Study of Microstructure and Nanomechanical Integrity
Source abstract
Abstract
This paper studies the influence of laser power and scanning speed through single laser scan tracks on AlNiCo5 and SS 304 substrates. Track morphologies and melt pool geometries were assessed to determine the prevailing melting modes. Cracking was observed only on AlNiCo5 substrates, while SS 304 substrates exhibited crack-free tracks, highlighting the advantages of its ductile FCC structure. Optimal laser powder bed fusion process parameters for AlNiCo5 fabrication were identified as 190 W and 600–900 mm/s for stable conduction melting, while for higher laser power processing, 270 W and 600–800 mm/s provided stable transition melting. Microhardness measurements, nanoindentation, and energy-dispersive X-ray spectroscopy were employed to analyze mechanical properties and compositional variation within the melt pools. Increased laser power led to noticeable dilution of the SS 304 substrate into the AlNiCo5 tracks, reducing the melt pool’s overall microhardness due to altered chemical composition. Nanoindentation analysis further confirmed localized mechanical heterogeneity within the melt pool, with Co- and Al-rich zones showing elevated nanohardness, elastic modulus, and resistance to plastic deformation (H/Er, H3/Er2), while substrate-diluted areas (Cr-enriched) exhibited softening linked to BCC-to-FCC phase transformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Conify, P. Nikolaidi 23A, Agios Ioannis Rentis, 182 33 Athens, Greece
IRES-Innovation in Research Engineering Solutions, Silversquare Europe Square de Meeûs 35, 1000 Brussels, Belgium
Funding
European Commission · European Health and Digital Executive Agency
References (71)
Show source-provided references
1. Cullity, B.D., and Graham, D. (2009). Introduction to Magnetic Materials, John Wiley. & Sons, Inc.10.1002/9780470386323 ↗
2. Architecture and magnetism of alnico10.1016/j.actamat.2014.04.044 ↗
3. Theory of Magnetic Properties and Nucleation in Alnico V10.1103/PhysRev.77.839.2 ↗
4. The phase and microstructure analysis of Alnico magnets with high coercivity10.1016/j.jmmm.2014.12.003 ↗
5. Net shape processing of AlNiCo magnets by additive manufacturing10.1109/TMAG.2017.2711965 ↗
6. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
7. Magnetic materials and devices for the 21st century: Stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
8. Additive Manufacturing of Nd-Fe-B Permanent Magnets and Their Application in Electrical Machines10.1109/ACCESS.2024.3436643 ↗
9. Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B10.1016/j.matdes.2021.109992 ↗
10. Laser powder bed fusion of Nd–Fe–B permanent magnets10.1007/s40964-020-00117-7 ↗
11. Microstructure and magnetic properties of Nd-Fe-B permanent magnets produced by laser powder bed fusion10.1016/j.scriptamat.2021.113921 ↗
12. Single track formation in selective laser melting of metal powders10.1016/j.jmatprotec.2010.05.010 ↗
13. Selective laser melting technology: From the single laser melted track stability to 3D parts of complex shape10.1016/j.phpro.2010.08.083 ↗
14. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
15. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
16. Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting10.1016/j.jmst.2016.06.016 ↗
17. Metal Additive Manufacturing: A Review10.1007/s11665-014-0958-z ↗
18. Additive manufacturing of metallic components—Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
19. A process parameters review on selective laser melting-based additive manufacturing of single and multi-material: Microstructure, physical properties, tribological, and surface roughness10.1016/j.mtcomm.2023.105538 ↗
20. On the limitations of volumetric energy density as a design parameter for selective laser melting10.1016/j.matdes.2016.10.037 ↗
21. White, E., Rinko, E., Prost, T., Horn, T., Ledford, C., Rock, C., and Anderson, I. (2019). Processing of alnico magnets by additive manufacturing. Appl. Sci., 9.10.3390/app9224843 ↗
22. Rinko, E.M., Anderson, I., Kassen, A., White, E., Tang, W., Zhou, L., Pries, J., and Kramer, M.J. (2019, January 23–26). Investigation of Powder Processing, Heat Treating, and Texturing to Improve Gas-Atomized Alnico Magnets for Use in Electric Drive Motors. Proceedings of the International Conference on Powder Metallurgy & Particulate Materials, Phoenix, AR, USA.
23. Rinko, E. (2018, January 17–20). Exploring Powder Processing of Cobalt-Lean Alnico Alloy as a Preferred Approach to Produce Full-Scale High-Performance Alnico Magnets with Near-Final Shape. Proceedings of the Advances in Powder Metallurgy & Particulate Materials, San Antonio, TX, USA.
24. Li, F., Meng, X., Fang, Y., and He, K. (2022, January 16–19). Magnetic properties and optimization of AlNiCo fabricated by additive manufacturing. Proceedings of the IEEE 17th Conference on Industrial Electronics and Applications (ICIEA), Chengdu, China.
25. Li, F., Meng, X., Fang, Y., and He, K. (2022, January 16–19). Mechanical properties and optimization of AlNiCo magnetic materials fabricated by selective laser melting. Proceedings of the IEEE 17th Conference on Industrial Electronics and Applications (ICIEA), Chengdu, China.
26. The Effect of Selective Laser Melting Conditions on the Structure of an Alnico Alloy10.1134/S0031918X22030103 ↗
27. TriBeam tomography and microstructure evolution in additively manufactured Alnico magnets10.1016/j.mattod.2021.05.003 ↗
28. Comparison of sequential and circular scanning thermal fields and their influence on microstructure of Alnico alloy produced by laser powder bed fusion10.1088/1742-6596/1967/1/012064 ↗
29. McCurrie, R. (1982). The Structure and Properties of Alnico Permanent Magnet Alloys. Handbook of Ferromagnetic Materials, Elsevier.10.1016/S1567-2719(82)03006-6 ↗
30. Synthesis, magnetic and microstructural properties of Alnico magnets with additives10.1016/j.jmmm.2016.12.023 ↗
31. Multiphysics multi-scale computational framework for linking process–structure–property relationships in metal additive manufacturing: A critical review10.1080/09506608.2023.2169501 ↗
32. Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experiments10.1016/j.actamat.2023.119244 ↗
33. Dahotre, N.B., Pantawane, M.V., and Sharma, S. (2022). Laser-Based Additive Manufacturing: Modeling, Simulation, and Experiments, John Wiley & Sons.10.1002/9783527828814 ↗
34. Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators10.1007/s11837-012-0351-z ↗
35. Popov, V.V., Koptyug, A., Radulov, I.A., Maccari, F., and Muller-Kamskii, G. (2017, January 25–27). Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets. Proceedings of the 15th Global Conference on Sustainable Manufacturing, Haifa, Israel.
36. Spinodal Decomposition in an Alnico Alloy10.1017/S1431927616004207 ↗
37. Structure of Alnico V10.1063/1.2000397 ↗
38. Mechanism of Magnetization in Alnico V10.1103/PhysRev.80.112.2 ↗
39. (2022). Standard Specification for Cast and Sintered AlNiCo Permanent Magnets 2022 (Standard No. ASTM 1070-16(2022)). Available online: https://www.astm.org/.
40. (2017). Standard Test Method for Microindentation Hardness of Materials (Standard No. ASTM E384-17). Available online: https://www.astm.org/.
41. Revealing the role of Cr addition on the microstructure, properties and softening resistance of a pre-aged Cu-Ni-Co-Si alloy10.1016/j.msea.2025.148615 ↗
42. Magnetic structure and coercivity mechanism of AlNiCo magnets studied by electron holography10.1016/j.jallcom.2017.05.210 ↗
43. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: Example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
44. Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations10.1016/j.actamat.2021.117570 ↗
45. Suppressing cold cracking in laser powder bed fused Al-Fe-V-Si alloy using top-hat laser profile10.1016/j.msea.2025.147858 ↗
46. On the origin of cracking in laser powder bed fusion processed LaCe(Fe,Mn,Si)13, and the impact of post-processing10.1016/j.jallcom.2023.172017 ↗
47. Minor Elements and Solidification Cracking During Laser Powder-Bed Fusion of a High gamma prime CoNi-Base Superalloy10.1007/s11661-023-06957-6 ↗
48. Crack initiation mechanism of laser powder bed fusion additive manufactured Al-Zn-Mg-Cu alloy10.1016/j.matchar.2022.112415 ↗
49. A comprehensive review of residual stress in metal additive manufacturing: Detection techniques, numerical simulation, and mitigation strategies10.1007/s40430-024-05319-6 ↗
50. Balling phenomena in selective laser melted tungsten10.1016/j.jmatprotec.2015.02.032 ↗
51. Systematic approach to process parameter optimization for laser powder bed fusion of low-alloy steel based on melting modes10.1007/s00170-023-11377-2 ↗
52. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry10.1016/j.jmatprotec.2021.117130 ↗
53. Single track scanning experiment in laser powder bed fusion process10.1016/j.promfg.2018.07.110 ↗
54. Mohammed, G.R., Ishak, M., Ahmad, S., and Abdulhadi, H. (2017). Fiber Laser Welding of Dissimilar 2205/304 Stainless Steel Plates. Metals, 7.10.3390/met7120546 ↗
55. Chen, X., Yan, L., Karnati, S., Zhang, Y., and Liou, F. (2017). Fabrication and Characterization of AlxCoFeNiCu1−x High Entropy Alloys by Laser Metal Deposition. Coatings, 7.10.3390/coatings7040047 ↗
56. Investigation of microstructure evolution and its effect mechanism on high temperature tensile properties of 304L stainless steel processed by laser powder bed fusion10.1016/j.msea.2024.146969 ↗
57. Matthews, M., Ye, J., Gargalis, L., Guss, G., Khairallah, S., and Rubenchik, A. (2019, January 10–15). Absorptivity and energy scaling associated with laser powder bed fusion additive manufacturing. Proceedings of the Conference on Lasers and Electro-Optics, Washington, DC, USA.10.1364/CLEO_AT.2019.AW3I.5 ↗
58. Denudation of metal powder layers in laser powder bed fusion processes10.1016/j.actamat.2016.05.017 ↗
59. A review on machining performance of AISI 304 steel10.1016/j.matpr.2021.11.003 ↗
60. Determination of Thermal Diffusivity and Thermal Conductivity of Fe-Al Alloys in the Concentration Range 22 to 50 at.% Al10.1361/105497101770332721 ↗
61. Laser powder bed fusion: A state-of-the-art review of the technology, materials, properties & defects, and numerical modelling10.1016/j.jmrt.2022.07.121 ↗
62. Dilution in Laser Cladding with Ni-Based Powders10.35219/awet.2021.07 ↗
63. Examination of molten pool with Marangoni flow and evaporation effect by simulation and experiment in selective laser melting10.1016/j.icheatmasstransfer.2021.105325 ↗
64. Microhardness and tensile strength of electrochemically synthesized nickel-cobalt binary alloy sheets exfoliated from a dumbbell-shaped titanium cathode10.1088/2053-1591/acc7e2 ↗
65. Sfikas, A.K., Gonzalez, S., Lekatou, A.G., Kamnis, S., and Karantzalis, A.E. (2022). A Critical Review on Al-Co Alloys: Fabrication Routes, Microstructural Evolution and Properties. Metals, 12.10.3390/met12071092 ↗
66. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
67. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system10.1016/j.matlet.2006.03.140 ↗
68. Controlled Crystallographic Texture Orientation in Structural Materials Using the Laser Powder Bed Fusion Process—A Review10.1002/adem.202300819 ↗
69. Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization10.1016/j.apmate.2023.100137 ↗
70. The AlSi10Mg samples produced by selective laser melting: Single track, densification, microstructure and mechanical behavior10.1016/j.apsusc.2017.02.215 ↗
71. Predicting the chemical homogeneity in laser powder bed fusion (LPBF) of mixed powders after remelting